• Journal of architectural history
• /
• v.21 no.3
• /
• pp.73-92
• /
• 2012

This study mainly inquired characteristics and changes of 'Chang-aelgool' through 38 cases(with 161 Ssang-chang) of annex and pavillion buildings in Yeong-nam region which are built during the Chosun dynasty. The method of inquiry included actual survey of windows along with bibliographical research, and the results are as below. First, through the discovery of the term 'Chang-aelgool' as an indication of the window-forming frame in 'YeongGeonUiGwe'(1680 A.D), it is apparent that the term 'Chang-aelgool' was widely used in Korea from the late 17th century. Second, the 'Chang-aelgool' of study objects are classified into 4 categories. Type I and II are comprised of mitre-joints which cover the 4 corners of 'Chang-aelgool' and mainly used in building annex and pavillion buildings during the early period of the Chosun dynasty. Type III was widely used during the early and middle period of the Chosun dynasty and drastically dropped in number during the late period of the dynasty. Type IV is comprised of mitre-joint of the upper-half, tenon-jointing of the lower-half and widely used in annex and pavillion building during the late period of the Chosun dynasty. Third, the form of 'Chang-aelgool' has changed from rectangular form with longer width during the early period of Chosun dynasty to square form during the middle period and eventually ended up as a rectangular form with longer height during the late period of the dynasty. Fourth, it is considered that while mullion which is located in the center of 'Chang-aelgool' was mainly used around the main floored room during the early period of the Chosun dynasty, became commonly used in main floored room and 'ondol' rooms during the middle period and drastically dropped in number from then and ended up being not in use after the mid 18th century.

• The Journal of Korean Academy of Prosthodontics
• /
• v.20 no.1
• /
• pp.83-91
• /
• 1982

The mandibular movement during mastication has been studied, however there is still much controversy, therefore the purpose of this study was to establish the fundamental data in order to provide the functional occlusion and information in prosthodontic treatment, and the diagnosis of temporomandibular joint disorder. The author analyzed the characteristics of the border and masticatory movements using the Mandibular Kinesiograph. The value, direction, deviation angulation of the border and masticatory movements were studied on the sagittal and frontal planes in 24 male subjects age of 22-28 without orofacial problems. The obtained results were as follows: 1. The values of border movement on the sagittal plane were an average of $25.81{\pm}5.14mm$ in vertical component and $24.37{\pm}3.76mm$ in ant-post component, and the posterior terminal hinge movement, $9.31{\pm}3.62mm$ in vertical component and $7.59{\pm}2.65mm$ in ant-post. component. 2. The distribution range of the masticatory movement within the border movement was an average of $19.2{\pm}12.81%$ of maximum ant-post, values and $55.5{\pm}16.1%$ of maximum values of border movement, and the movement path, for the most part, was directed to posterior deviation and ranged from 0.98 to 12.00mm, on an average of $5.15{\pm}3.49mm$. 3. On the frontal plane, a number of left and right deviation in 24 subjects was same, however, the right deviation was an average of $2.51{\pm}1.67mm$ compared with the left deviation. 4. On the frontal plane, the point of maximum lateral deviation was an average of $49.7{\pm}11.0%$ of maximum opening values. 5. The angulation between the terminal hinge movement path and the masticatory path was an average of $24.00{\pm}4.65$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.53-60
• /
• 2003

Large sized marine structures are used under corrosion environment of seawater and applied by severe service loading such as an ocean current, a billow and a tempest. Marine structures are usually constructed by lots of thick wall steel pipes joining welded joints. The thickness of such as steel pipes is usually more than 40mm. The such as steels are called "Thermo-Mechanical Control Process steel (TMCP steel)" strengthened by a heat treatment in process of steel manufactures. The failure, especially crack initiation, of marine structures was starting at weld joints under service condition. Then they should be designed by basis of the fatigue strength under seawater corrosion environment of weld joints. To clarity the fatigue crack initiation behavior is important more than to clarify the crack propagation behavior on the strength design of marine structures, because it is very difficult to find out the crack initiation and propagation phenomena and then even if it will be able to find out, it is considered that the refit of the damaged parts of welded joints have a technical difficulty under the sea. Therefore, it is most important to clarify the corrosion fatigue crack initiation behavior under the seawater condition. But, there is one big difficulty to make a test for thick plate specimen, for example thicker than 40mm. Because, it is need large capacity loading apparatus to test such as thick plate specimen. In this research, the new configuration specimen for fatigue crack initiation tests was proposed. Using this new specimen, it is easy to carry out the fatigue clack initiation tests with relatively low cyclic loading and to observe a fatigue crack initiation behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.8
• /
• pp.759-765
• /
• 2016

The PTO (Power Take-Off) shaft for aircraft, with welded construction using multiple thin membranes, was developed in the 1950s to improve the elasticity of the part. As it is lightweight, stable at high speeds, and has good flexibility, it is used in most of the fighter aircraft. It connects the AMAD (aircraft mounted accessory drive) gearbox with the EMAD (engine mounted accessory drive) gearbox and transmits the rotational power between them. It operates in the high speed range of 10,000-18,000 rpm. In this study, the safety of the PTO shaft made of Ti alloy was investigated using finite element analysis, and the ability to transmit power was demonstrated through a high-cycle fatigue test conducted in a laboratory. Further, the life of the ball joints of the aircraft under high-cycle fatigue test conditions was predicted, and the wear characteristics were analyzed.

• Korean Journal of Adult Nursing
• /
• v.13 no.1
• /
• pp.159-170
• /
• 2001

The purpose of this pilot study was to identify the effects of hand moxibustion therapy to decrease pain and relieve coldness of the body in women who had a hysterectomy. The conceptual framework of this study was derived from Ying-Yang, Khi and other corresponding theories. The data were collected from February to May 1997. A Graphic Rating scale was used to measure the degree of pain and Digital Infrared Thermographic Imaging(D.I.T.I) was used to examine the degree of coldness. The subjects were women who resided in Seoul and had a hysterectomy within five years. An experimental group was composed of five women who received moxibustion and a control group was composed of five who did not. The research procedure began with having both the experimental group and control group describe their general characteristics and the degree of pain they perceived. Then, Digital Infrared Thermographic Imaging(D.I.T.I) was conducted. Moxibustion was only given to the experimental group on both hands twice every day for a total of five weeks. Their perception of pain and D.I.T.I were examined weekly. The control group received no therapy. After finishing therapy, the perception of pain and D.I.T.I for both groups were also measured. According to this study, moxibustion therapy resulted in a change of body temperature on the right shoulder joint(p=0.00074), abdomen(p= 0.0047), waist(p=0.0068) and hands(p=0.0317) respectively. Also, the study results showed significant decrease (p=0.0001) in pain over time and significant improvement over body coldness.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.2
• /
• pp.77-86
• /
• 2017

Globally, use of affordable fuels such as briquettes, woods and wood pellets has increased. Organic pollutants emitted from non-point sources using solid fuels may have contributed to air pollution in urban environment. In this study, we utilized simulated incinerator proposed by U.S. EPA and investigated concentrations of PM, $PM_{10}$, $PM_{2.5}$, OC/EC, CO, $SO_x$, $NO_x$, VOCs and PAHs emitted while cooking meat and fish using briquettes, woods and wood pellets, and developed emission factors. As a result, wood combustion produced more air pollutants than the others. Particulate matter emission factors for woods and wood pellets were 13.54 g/kg and 9.15 g/kg, respectively. Total VOCs emission factors for briquettes, woods and wood pellets were 36.12mg/kg, 46.13mg/kg and 18.26mg/kg, respectively. Additionally, total PAHs emission factors for briquette, woods and wood pellets were 0.44 mg/kg, 18.84mg/kg and 101.62mg/kg, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.733-738
• /
• 2017

In this study, we selected chlorine, a typical toxic material used in many workplaces, as the leakage material, and through the analysis of alternative scenarios based on the meteorological conditions in the summer frequently encountered in accidents, we suggest ways to improve the (method of analysis/accident scenario modeling). The analysis of 296 chemical accidents from January 2014 to December 2016 found that the highest rate of occurrence was in summer, accounting for 35.81% of the total. According to the risk assessment, the influence range and number of inhabitants in the influence area were 712.4 m and 20,090 under the annual mean weather conditions and 796.2 m and 27,143 people under the summer mean weather conditions, respectively. This result implies that, under certain conditions, the range of impacts in the current alternative scenario is incomplete. Therefore, risk assessment systems need to be improved in order to take into consideration the characteristics of each chemical substance.

• Journal of Korean Academy of Nursing
• /
• v.50 no.2
• /
• pp.286-297
• /
• 2020

Purpose: This study aimed to identify the effects of myofascial pain syndrome on shoulder pain, range of motion, and body composition around the shoulder in middle-aged women. Methods: A total of 72 women participated in the randomized controlled trial. The subjects were grouped into an experimental group (n=39) and a control group (n=33). The experimental group received a resistance exercise program using an elastic band for 8 weeks, 3 days a week. The control group followed a normal daily for 8 weeks. Measurements were conducted three times; before the experimental treatment (pre-test), the 2nd and 8th weeks after treatment. Results: Regarding the general characteristics and homogeneity of the dependent variables, there were no significant differences between the two groups, except for the thickness of the left and right muscles and the left fat. After treatment, shoulder pain was significantly different between the two groups (F=18.54, p<.001) and the range of shoulder motion was significantly different (left, F=86.70, p<.001; right, F=98.66, p<.001). Furthermore, there were a significant differences in the thickness of muscles between the two groups (left, F=40.20, p<.001; right, F=29.57, p<.001); however, the thickness of fat was not significantly different. Conclusion: The resistance exercise program reduces shoulder pain and improves the range of motion of the shoulder joint and increases muscle mass on around the shoulder. It suggests to conduct a study to confirm the long-term exercise effect.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.43-49
• /
• 2002

In this Paper, the mechanical behavior of two reかangular plates spot-welded under free vibration is investigated in detail. The focus of the analysis is to evaluate the effect of thickness of reinforced plates with equivalent thickness. The results of this the investigation are compared with detailed finite element analysis end experiments of the plates spot-welded for various parameters, such as aspect ratio, arm ratio, and distance ratio of spot-welding Points. The conclusion obtained are as followed. 1. The effect thickness due to spot-weld is very large, such as 55% in comparison with area ratio of spot-welding joint is just 4.52%. 2 The effect of thickness with respect to the distance ratio is maximized when the distance ratio is 0.4.

• Journal of Korea Water Resources Association
• /
• v.42 no.9
• /
• pp.725-736
• /
• 2009

A flood event can be defined by three characteristics; peak discharge, total flood volume, and flood duration, which are correlated each other. However, a conventional flood frequency analysis for the hydrological plan, design, and operation has focused on evaluating only the amount of peak discharge. The interpretation of this univariate flood frequency analysis has a limitation in describing the complex probability behavior of flood events. This study proposed a bivariate flood frequency analysis using a Gumbel mixed model for the flood evaluation. A time series of annual flood events was extracted from observations of inflow to the Soyang River Dam and the Daechung Dam, respectively. The joint probability distribution and return period were derived from the relationship between the amount of peak discharge and the total volume of flood runoff. The applicability of the Gumbel mixed model was tested by comparing the return periods acquired from the proposed bivariate analysis and the conventional univariate analysis.