• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.30-36
• /
• 2015

Austenite stainless steel(SA213-TP347H) has widely been used for the superheater & reheater tube in USC(ultra-supercritica) coal boiler because of its high creep rupture strength and anti-oxidation. But recently, the short-term failures have happened frequently in heat affected zone for only 4,000~15,000hours of service. Many investigations have been conducted to understand the failure mechanism. The root cause of failure was comfirmed to "strain induce participation hardening crack" or "reheat cracking". This mechanism often occurred due to weld residual stress and precipitation of the Cr, Nb carbides in the stabilized stainless steel such as TP347H. This paper presents an analysis of failure tube and effect of the sample tubes that conducting stabilizing heat treatment in site after 11,380hours & 16,961hours of service. Visual inspection was performed. In addition, microscopic characteristics was identified by O.M, SEM, and hardness test was carried out to find out the heat treatment effects. Failures seem to happen because of being not conducted stabilizing heat treatment in site. And another cause is inadequate weld parameter such as pass, ampere, voltage, inter-pass temperature. Thus, this paper has the purpose to describe that how to prevent similar failures in those weld-joints.

• Mineral and Industry
• /
• v.26
• /
• pp.22-31
• /
• 2013

KIGAM and MRAM (Mineral Resources Authority of Mongolia) performed joint researches on geological survey of Dulaankhaikhan W-Mo occurrences areas in southeastern part of Khangai region. XRD results of tungsten containing quartz vein sample show that tungsten minerals are wolframite, hubnerite and ferberiteore. $WO_3$ grade of samples obtained in Silurian Khotont formation is 0.11-4.43% and that of samples obtained in Permian Delgerkhan complex is 137-3844 ppm. Average total $R_2O_3$ of samples obtained in survey area is 473 ppm which is 2.5 times larger than that of Earth's crust. The highest total $R_2O_3$ is 1326 ppm. Factor analysis results show that two areas of high tungsten contents have similar correlations with tungsten, and therefore we conclude that these two areas have the similar origin of mineralization.

• The Journal of the Korean bone and joint tumor society
• /
• v.14 no.1
• /
• pp.10-16
• /
• 2008

With the advent of effective chemotherapy and the realization of high economic cost associated with amputation, limb salvage surgery has become the standard of treatment in children with primary malignant bone tumors. Reconstruction after resection of malignant bone tumors of children has to address the leg length inequality and also has to be durable to cope with high functional demands of young patients. Expandable endoprostheses have been used in children for achieving limb length equality with substantial risk of complications. Recently, significant advances in prosthetic designs have reduced the morbidities associated with these prostheses. The purpose of this study was to review the indications, characteristics, complications and recent developments of expandable endoprostheses used for malignant bone tumors in children.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1157-1164
• /
• 2011

In this study, association of small business is divided into four groups: Franchise, Joint Brand, Industry Association and Registered Retailer. Cluster analysis is taken to find what kind of strategic considerations associated small businesses choose when they set up new strategies. The results show that there are some differences in the perception of association, effects of association and final performance of management by gender, academic background, and age. The data also find three clusters: price competitive, marketing competitive and neither group. Implications of this study is that government should focus more on not only improving infrastructures of self-businesses but also associating small businesses, modernizing managerial systems in the future.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.2
• /
• pp.171-180
• /
• 1995

Recently vascularized fibular transfer has been used in the treatment of bone tumor that are more than six centimeter in length. With refinements in microsurgical techniques and understanding of the biological and biomechanical characteristics of vascularized bone graft, the success rate of this procedure was increased. Fifteen bone tumor patients, sixteen cases seen from Apr. 1979 to Jun. 1995 were managed by means of vascularized bone graft at Kyung Hee University Hospital. Ten cases were done intercalary graft and the others were done osteoarticular graft. the ratio of male and female was 6 : 9, and mean age was 20.4 years old at operation. Mean follow up period was 5 years 4 months(range 17 months to 16 years 2 months) and mean graft length was 13.8cm. Duration for union was 5.3 months(range 3 months to 1 year) and over-all rate of union at the last follow up examination was 93.8%. Sufficient hypertrophy of grafted bone was obtained in all cases at the time of last follow up as compared to initial size of grafted bone. Several complications were found such as stress fractures, recurrence. Vascularized fibular transfer for the treatment of bone tumor is a valuable procedure in appropriately selected patients.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.77-83
• /
• 2003

Aggressive fibromatosis is a rare soft tissue tumor with locally invasive and infiltrative characteristics. The mechanism of this invasive nature was not reported until now. Mutations or reduction of PTEN, tumor suppressor gene, in cancer tissues, have been found to be associated with invasiveness and metastatic properties of cancer cells. To know the pattern of expression of PTEN in aggressive fibromatosis, we analysed the expression of PTEN with immunohistochemical stain and immunoblotting. PTEN was homogeneously expressed in the normal musculoaponeurotic tissues, but absent or very faint in tissues of patients with aggressive fibromatosis as evidenced by western blot analysis and immunohistochemical examinations. Although the meaning of decreased PTEN expression in aggressive fibromatosis is not certain, it might be involved in the growth of the aggressive fibromatosis, and associated with phenotype of aggressive fibromatosis.

• Journal of the Korea Computer Graphics Society
• /
• v.5 no.2
• /
• pp.33-41
• /
• 1999

This paper presents a new algorithm about motion adjustment for dynamic balance. It adjusts an unbalanced motion to an balanced motion while preserving the nuance of original motion. We solve dynamic balancing problem using the zero moment point (ZMP) which is often used for controlling the balance of biped robot. Our algorithm is consists of four steps. First, it fits joint angle data to spline curves for reducing noise. Second, the algorithm analyzes the ZMP trajectory so that it can detects the dynamically-unbalanced duration. Third, the algorithm project the ZMP trajectory into the supporting area if the trajectory deviates from the area. Finally, the algorithm produces the balanced motion that satisfies the new ZMP trajectory. In this step, the constrained optimization method is used so that the new motion keeps the original motion characteristics as much as possible. We make several experiments in order to prove that our algorithm is useful to add physical realism to a kinematically edited motion.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.867-877
• /
• 2009

These days, the fantastic in opposition to classic beauty becomes a genre of creative body expression. The purpose of this study was to analyze the expressive characteristics of body types and meanings in recent fantastic fashion illustration. The method of this study was to analyze recent documentaries, fashion books, internet web site and so forth. The results were as follows: In literatures, pictures and movies, the category of the fantastic body's expressive types were classified as dominant mutant based on SF, multi body or fragment body by disruption, heterogeneous compound based on myth, personified humanoid and non substance in supernatural boundary. The dominant mutant based on SF was expressed image morphing, composition of machine image with body and modern metamorphosis of classic SF body. It means propensity to post-feminism and reservation of meaning analysis based on human unconsciousness. The multi body or fragment body by disruption in fashion illustration was expressed distorted composition of same body pictures, replacement of different bodies, deconstruction and partial omission of body and composition of meaning or non meaning images. It means permanence of self and basic narcissism. The heterogeneous compound based on myth was expressed general composition or optical illusion of various and aggressive animal motive. It means reinterpretation of original myth, metaphor of basic femme fatale, pursuit of permanence and sign of primitive mind in unconsciousness. The personified humanoid was expressed real human body description of mannequin or ball joint doll and anthropomorphism of robot image. It means representative satisfaction and nostalgia of childhood. The non substance in supernatural boundary was expressed grotesque description of ghost, zombie, vampire, angel, fairy, using of symbolic red, black color and non body. It means human's basic desire about immortality and taboo. Through the result of these study, the expression of fantastic body in fashion illustration will expend expressive method and we will understand human and cultural codes of today.

• Journal of the Korean Institute of Gas
• /
• v.17 no.1
• /
• pp.19-25
• /
• 2013

The joining methods of steel structures of gas facilities, bridges, ships etc. by welding are composed mostly of T-type or cruciform fillet welding and full penetration or partial penetration according to the uses and the shape of the structures. In this study, it was examined the characteristics of fatigue crack according to penetration depth in relation to material thickness in the cruciform fillet welded joints. From the results, it was investigated the safe design stresses within the range of infinite life. When the LOP length is long the range of infinite life is small with root failure and when the LOP length is short the range of infinite life is large with teo failure. For the specimen of material thickness, 20mm welded by 3 pass compared with 10mm, 15mm welded by 2 pass, the fatigue strength and the range of infinite life was more improved by increasing of notch toughness from formation of micro-ferrite acicular structure.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.565-577
• /
• 1996

This study was conducted to evaluate the association of work posture with cervical spine abnormality toward 106 microwave-oven assemblers. A self-administered questionnaire was used to obtain a general characteristics and a work history of workers. The posture of neck and shoulder joint of workers were measured with video tape recording and the simple X-ray of cervical spine was checked-up to observe the X-ray abnormality including degenerative change, curvature abnormality, disc space narrowing or disc canal narrowing. The result were as follows. 1. The prevalence of degenerative change among cervicobrachial disorder workers was 44.3% (47 persons), curvature abnormality was 43.4%(46 persons), disc space narrowing was 21.7%(23 persons), and disc canal narrowing was 21.7%(23 persons). 2. The prevalence of degenerative change at cervical spine was increased with the degree of neck flexion(flexed versus neutral, odds ratio [OR]=2.7), the total work posture of neck(mild or severe awkward versus neutral ; OR=1.2, 3.4). 3. The prevalence of degenerative change at cervical spine was increased with the degree of the right shoulder flexion, the heaviness of the materials carried by the right hand and the degree of awkwardness at the total work posture of right shoulder(p<0.05). 4. There was no evidence of association between curvature abnormality, disc space narrowing, disc canal narrowing and work posture. In conclusion the awkward work posture was related with degenerative change of cervical spine among microwave oven assembling workers and the further study in these field must be made to prove the association objectively.