• 제목/요약/키워드: isotropic point

검색결과 116건 처리시간 0.025초

Experimental study of anisotropic behavior of PU foam used in sandwich panels

  • Chuda-Kowalska, Monika;Garstecki, Andrzej
    • Steel and Composite Structures
    • /
    • 제20권1호
    • /
    • pp.43-56
    • /
    • 2016
  • Polyurethane foam with low density used in sandwich panels is examined in the paper. A series of experiments was carried out to identify mechanical parameters of the foam. Various experimental methods were used for determining the shear modulus, namely a four and three point bending tests (the most common in engineering practice), a double-lap shear test and a torsion test. The behavior of PU in axial compression and tension was also studied. The experiments revealed pronounced anisotropy of the PU foam. An orthotropic model is proposed. Limitations of application of isotropic model of PU in engineering practice is also discussed.

Rotation Effect of In-plane FM layer on IrMn Based GMR-SV Film

  • Khajidmaa, Purevdorj;Choi, Jong-Gu;Lee, Sang-Suk
    • Journal of Magnetics
    • /
    • 제22권1호
    • /
    • pp.7-13
    • /
    • 2017
  • The magnetoresistance (MR) properties of antiferromagnetic (AFM) IrMn based giant magnetoresistance-spin valve (GMR-SV) was investigated in view point of the artificial rotation effect of ferromagnetic (FM) layer in the plane induced by an applied field during the post annealing temperature. The MR curves measured with an azimuthal angle region of ${\phi}=0^{\circ}-360^{\circ}$ are depended on the annealing temperature and the magnetization easy axis of two free NiFe layers and two pinned NiFe layers in dual-type GMR-SV film. Especially, the annealing temperature and sample rotation angle(${\theta}$ ) maintained to the magnetic sensitivity (MS) of 1.4 %/Oe with an isotropic region angle of $110^{\circ}$ are $100^{\circ}C$ and $90^{\circ}$, respectively.

Single Crystal EPR Spectra of $K_{12}[As_2W_18O_{66}Cu_3(H_2O)_2]{\cdot}11H_2O$, a Copper(II) Trimer

  • 조영환;소현수
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권3호
    • /
    • pp.243-248
    • /
    • 1995
  • Single crystal EPR spectra of K12[As2W18O66Cu3(H2O)2]${\cdot}$11H2O exhibit an orientation-dependent fine structure of an S = 3/2 system which is accounted for by the exchange and magnetic dipole interactions among the three Cu2+ ions. The hyperfine structure and the lines from the S = 1/2 manifolds have not been observed. The isotropic exchange parameters determined from the magnetic susceptibility data at 5-300 K are J1 = J2 =-7.8 cm-1. The magnitude of J values suggests that the unpaired electrons on three Cu2+ ions interact through a sequence of six bonds involving two tungsten atoms and three oxygen atoms. The Cu-Cu distance, 4.37 $\AA$, determined from the EPR spectra is considerably smaller than the value from the X-ray crystal structure determination, 4.76 $\pm$ 0.03 $\AA$, indicating that the point-dipole model underestimates the dipolar interaction.

An implicit damage-plastic model for concrete

  • Gustavo Luz Xavier da Costa
    • Computers and Concrete
    • /
    • 제33권3호
    • /
    • pp.301-308
    • /
    • 2024
  • This paper proposes a numerically-based methodology to implicitly model irreversible deformations in concrete through a damage model. Plasticity theory is not explicitly employed, although resemblances are still present. A scalar isotropic damage model is adopted and the damage variable is split in two: one contributing for stiffness degradation (cracking) and other contributing for irreversible deformations (plasticity). The proposed methodology is thermodynamically consistent as it consists in a damage model rewritten in different terms. Its Finite Element coding is presented, indicating that minor changes are necessary. It is also demonstrated that nonlinear algorithms are unnecessary to model concrete cracking and plasticity. Experimental data from direct tension and four-point bending tests under cyclic loading are compared to the proposed methodology. A numerical case study of a low-cycle fatigue is also presented. It can be concluded that the model is simple, feasible and capable to capture the essentials concerning cracking and plasticity.

자철석의 저온 자화특성 (Magnetic Properties of Magnetites at Low Temperatures)

  • 홍화빈;유용재
    • 한국광물학회지
    • /
    • 제24권1호
    • /
    • pp.37-42
    • /
    • 2011
  • 지구의 암권에서 가장 중요한 자성광물은 자철석이다. 암석 내에 존재하는 자철석의 성분과 입자 크기에 관한 정보를 알아내는데 저온 자화특성을 이용하려 한다. 물리적 방법의 하나인 저온 자화특성 실험은 비파괴적이며 운석과 같이 연구 대상 시료의 수량이 제한된 경우 특히 유용하게 사용된다. 금번 연구에서는 세 종류의 합성 자철석 시료와 세 종류의 자철석 함유 암석 시료에 대해 저온포화잔류자화의 가열실험과 실온포화잔류자화의 냉각/가열 실험을 수행하였다. 실험 결과 저온포화잔류자화는 가열함에 따라 자철석의 버웨이변환온도(~105~120 K)를 지나며 급격히 감소한다. 자철석의 버웨이변환온도와 등방점(135 K)를 모두 거치는 실온포화잔류자화의 냉각과 가열 실험 결과에서는 저온포화잔류자화의 가열 실험 결과와 비교하였을 때 자화회복력이 뛰어나고, 자화상실이 상대적으로 완만히 진행된다. 저온포화잔류자화와 실온포화잔류자화 모두 자철석의 입자 크기가 증가할수록 소실되는 포화잔류자화의 비가 증가한다. 결국 저온포화잔류자화기억도와 실온포화잔류자화기억도 모두 자철석의 입자가 커질수록 감소한다. 따라서 저온 자화특성을 이용하면 암석 내 자철석 입자의 크기를 비파괴적인 방법으로 유추할 수 있다.

등매개변수 사변형요소를 적용한 유한요소해석법 (Finite element method adopting isoparametric formulation of the quadrilateral elements)

  • 이승현;한진태
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.205-212
    • /
    • 2018
  • 본 연구에서는 상용 해석프로그램에서 구현하기에 어려움이 있는 지반공학적 문제를 해결하기 위한 쉽고 직관적인 해석 프로그램 개발의 일환으로 계산의 정확도가 상대적으로 높은 요소를 채택한 유한요소법을 정식화 하고 해석과정을 프로그램화 하였다. 개발된 프로그램의 계산과정에 있어서의 신뢰성 확인을 위해 두 가지 예에 대한 해석을 수행하고 결과분석을 해 보았는데 첫 번째 예는 등방구속압이 요소에 작용하는 경우이고 나머지 예는 전단응력이 요소의 측면에 작용하는 경우이다. 유한요소를 구성하는 요소로는 등매개변수 사변형 요소를 채택하였는데 요소내의 변위는 요소의 절점변위와 형상함수로 표현된다. 전체좌표(global coordinate)에 의한 미분계수로 표현되는 변형률을 얻기 위해 자코비언과 자연좌표(natural coordinate)를 이용하는 계산과정을 코딩하였다. 요소의 강성행렬을 정의하는 이중적분식을 수치적분으로 변환시키기 위해 4점 가우스 구적법을 적용하였다. 개발된 프로그램의 계산과정 검증을 위해 등방구속압이 작용하는 요소에 대한 해석을 수행한 결과 요소내의 네 개의 가우스점과 요소 중앙에 대해 계산된 응력값이 등방구속압과 일치됨을 알 수 있었다. 개발된 프로그램의 계산과정 검증을 위해 전단응력이 작용하는 요소에 대한 해석을 수행한 결과 요소내에 발생되는 횡방향응력 및 연직응력이 위치에 따라 변화됨을 알 수 있었으며 외력에 대한 발생응력의 크기 및 분포양상이 합리적임을 알 수 있었다.

An Analytical Investigation on the Build-up of the Temperature Field due to a Point Heat Source in Shallow Coastal Water with Oscillatory Alongshore-flow

  • Jung, Kyung-Tae;Kim, Chong-Hak;Jang, Chan-Joo;Lee, Ho-Jin;Kang, Sok-Kuh;Yjm, Ki-Dai
    • Ocean and Polar Research
    • /
    • 제25권1호
    • /
    • pp.63-74
    • /
    • 2003
  • The build-up of the heat field in shallow coastal water due to a point source has been investigated using an analytical solution of a time-integral form derived by extending the solutions by Holley(1969) and also presented in Harleman (1971). The uniform water depth is assumed with non-isotropic turbulent dispersion. The alongshore-flow is assumed to be uni-directional, spatially uniform and oscillatory. Due to the presence of the oscillatory alongshore-flow, the heat build-up occurs in an oscillatory manner, and the excess temperature thereby fluctuates in that course and even in the quasi-steady state. A series of calculations reveal that proper choices of the decay coefficient as well as dispersion coefficients are critical to the reliable prediction of the excess temperature field. The dispersion coefficients determine the absolute values of the excess temperature and characterize the shoreline profile, particularly within the tidal excursion distance, while the decay coefficient determines the absolute value of the excess temperature and the convergence rate to that of the quasi-steady state. Within the e-folding time scale $1/k_d$ (where $k_d$ is the heat decay coefficient), heat build-up occurs more than 90% of the quasi-steady state values in a region within a tidal excursion distance (L), while occurs increasingly less the farther we go to the downstream direction (about 80% at 1.25L, and 70% at 1.5L). Calculations with onshore and offshore discharges indicate that thermal spreading in the direction of the shoreline is reduced as the shoreline constraint which controls the lateral mixing is reduced. The importance of collecting long-term records of in situ meteorological conditions and clarifying the definition of the heat loss coefficient is addressed. Interactive use of analytical and numerical modeling is recommended as a desirable way to obtain a reliable estimate of the far-field excess temperature along with extensive field measurements.

초점불완전 열화추정 및 영상복원기법을 사용한 자동초점시스템 (A Digital Auto-Focusing Algorithm Using Point spread function Estimation Image Restoration)

  • 김상구;박상래;백준기
    • 전자공학회논문지S
    • /
    • 제36S권2호
    • /
    • pp.57-62
    • /
    • 1999
  • 점확산 함수(point spread function: PSF)의 정확한 주정은 복원결과가 원 영상에 얼마나 근접할 수 있는가를 결정한다는 점에서 영상처리의 중요한 연구 주체중의 하나가 된다. 본 논문에서는 PSF를 추정하기 위한 새로운 알로리즘을 제안하고, 이를 영상복원에 적용한 후 이를 기반으로 완전 디지털 자동초점 시스템을 제안한다. 자동초점시스템을 구현하기 위한 과정은 두 단계로 구성되어 있는데, 즉 에지 분류을 통한 PSF측정과, 이를 이용한 영상복원이다. 보다 구체적으로, 입력 영상을 다수의 소 영상 혹은 블록으로 분할한 뒤, 에지를 포함하고 있는 블록들로부터 단위계단응답을 구하여 평균한 후, 2차원 등방성 PSF를 추정한다. 마지막으로 추정된 PSF를 사용하여 영상복원을 수행함으로써 맞는 영상을 구한다.

  • PDF

Combination of engineering geological data and numerical modeling results to classify the tunnel route based on the groundwater seepage

  • Aalianvari, A.
    • Geomechanics and Engineering
    • /
    • 제13권4호
    • /
    • pp.671-683
    • /
    • 2017
  • Groundwater control is a significant issue in most underground construction. An estimate of the inflow rate is required to size the pumping system, and treatment plant facilities for construction planning and cost assessment. An estimate of the excavation-induced drawdown of the initial groundwater level is required to evaluate potential environmental impacts. Analytical and empirical methods used in current engineering practice do not adequately account for the effect of the jointed-rock-mass anisotropy and heterogeneity. The impact of geostructural anisotropy of fractured rocks on tunnel inflows is addressed and the limitations of analytical solutions assuming isotropic hydraulic conductivity are discussed. In this paper the unexcavated Zagros tunnel route has been classified from groundwater flow point of view based on the combination of observed water inflow and numerical modeling results. Results show that, in this hard rock tunnel, flow usually concentrates in some areas, and much of the tunnel is dry. So the remaining unexcavated Zagros tunnel route has been categorized into three categories including high Risk, moderately risk and low risk. Results show that around 60 m of tunnel (3%) length can conduit the large amount of water into tunnel and categorized into high risk zone and about 45% of tunnel route has moderately risk. The reason is that, in this tunnel, most of the water flows in rock fractures and fractures typically occur in a clustered pattern rather than in a regular or random pattern.

스마트 스킨 구조물 시편의 유한요소 해석 (FEM Analysis of Smart Skin Structure Specimen)

  • 전지훈;황운봉
    • Composites Research
    • /
    • 제16권4호
    • /
    • pp.59-65
    • /
    • 2003
  • 샌드위치 구조물의 응용된 형태인 스마트 스킨 구조물을 ABAQUS로 유탄요소 해석하였다. 심재로 쓰이는 하니컴은 일반적으로 두께 방향 강성 및 전단 강성만 제작회사에 의하여 제공된다. 이를 바탕으로 하니컴 재료의 물성을 추정하여 다른 방향의 제공되지 않는 물성을 계산하였고, 이를 유탄요소 해석시 물성 자료로 적용하였다. 또한, 스마트 스킨 구조물의 좌굴 및 3점 굽힘 거동을 유한요소 해석하였으며, 기존의 실험결과 및 이론값과 비교 분석하였다. 비교적 결과가 잘 일치하였다. 본 연구를 통하여서 하니컴의 물성을 상용 패키지에 적용하는 방법 및 타당한 근거를 제시하였고, 이 결과를 바탕으로 스마트 스킨 구조물을 상용패키지로 유한요소 해석시 지침을 제시할 수 있다