• Nutritional Sciences
• /
• v.5 no.2
• /
• pp.53-59
• /
• 2002

This study was conducted to examine the effects of dietary sources of fatty acids and protein on serum protein profiles, hepatic functional enzyme activities, mammary tumor incidence and tumor weight in 7, 12-dimethylbenz($\alpha$)anthracene (DMBA)-treated rats. The sources of dietary fatty acids were 18n6 (rich in linoleic acid), 18n3 (rich in linolenic acid) and 22n3 (rich in DHA) : sources of dietary protein were casein (C) and soy protein isolate (S). mammary tumors (MTs) were chemically induced by DMBA (9 mg/100 g body weight) which was gastrically intubated at 7 weeks of age. Each experimental diet was given for the following 25 weeks. Casein-fed rats (group C) exhibited significantly higher levels of weight gain and FER (food efficiency ratio) than did group S. Group C showed higher levels of serum protein and globulin, and higher albumin/globulin (A/G) ratios than group S. Liver functional enzyme activities (GOT, GPT, ALP, LDH, $\gamma$-GT) and LDH/GOT ratios were not influenced by dietary protein. GPT activity was lower in the group given 18n3, and ALP activity was lower in the group given 18n6. The incidence and total number of MTs appeared to be lower in the group given 22n3 than in the group given 18n3 or 18n6, even though the average weight of MTs was highest in the group given 22n3, The average weight of MTs was higher in the C group than in the S group. MT incidence had a positive correlation with LDH activity and LDH/GOT ratio. The average weight of MTs had a negative correlation with serum albumin levels and A/G ratios, and a positive correlation with ALP activity. This research suggests that the measurement of serum protein profiles and liver functional enzyme activities may be utilized to monitor the development of mammary tumors.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.285-291
• /
• 2006

The effects of sorbitol mixture as plasticizers on moisture sorption property (MSP), water vapor permeability (WVP), color, tensile strength (TS), elongation at break (E), and total soluble matter (TSM) of soy protein isolate (SPI) films were investigated. Two different types of sorbitols, aqueous and crystalline, were added to film-forming solutions in various ratios of crystalline to aqueous (0:1, 0.25:0.75, 0.5:0.5, 0.75:0.25, or 1:0, based on weight). In addition, the characteristics of the SPI films plasticized by sorbitol mixtures and glycerin were compared with moisture sorption rate against time. Sorbitol-plasticized films had higher in TS, but lower in WVP and E than the glycerin-plasticized films. However the properties of SPI films did not differ appreciably by the type of sorbitol added to film-forming solutions. To explain the high solubility and low WVP of sorbitol-plasticized films, cumulative amounts of moisture content gained during adsorption and lost during desorption of films were compared between sorbitol and glycerin-plasticized films. The result suggest that use of sorbitol as a plasticizer for preparing SPI films improves moisture barrier properties of the films. However the high solubility of sorbitol-plasticized films needs to be reduced for improving the functionality of SPI films in potential packaging applications.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.305-310
• /
• 2011

Edible films were developed from defatted soybean meal (DSM), a byproduct from the soy product industry, investigating the effects of the concentrations of DSM and glycerol and the treatment of high pressure homogenization (HPH) on color, water vapor permeability, and tensile properties of the films. The physical properties of the developed films (DSM films) were compared to those of the films made of soy proteins isolated from the DSM. DSM films were obtained by drying film-forming solutions prepared with DSM powder, glycerol, and water and with and without HPH at 152 MPa. HPH resulted in the formation of continuous and uniform films. Water vapor permeability of the films increased with increase in the concentration of glycerol and decreased by high pressure homogenization. The increase in the glycerol concentration in the film-forming solution prepared without HPH decreased the tensile strength and elastic modulus of the films. However, this effect was not observed with the HPH-treated solution. DSM films possessed higher tensile strength and percentage elongation than the film of soy protein, implying the potential for the DSM film to be applied to food product as an edible film.

• Korean journal of food and cookery science
• /
• v.14 no.5
• /
• pp.589-596
• /
• 1998

This study was carried out to evaluate the quality attributes of soy yogurts prepared by different types of oligosaccharides (fructooligosaccharide, galactooligosaccharide , isomaltooligosaccharide) and Bifidobacteria (B. bifidum B. breve, B. infantis) containing enzyme treated soy protein isolate in terms of pH, titratable acidity, total number of viable cells of Bifidobacteria, ${\alpha}$-galactosidase activity, organic acids, volatile compounds. The pH values of soy yogurts fermented by B. bifidum showed the highest significantly but those fermented by B. infantis showed the lowest significantly, while the titratable acidity of soy yogurts were vice versa. The viable cells of Bifidobacteria of all soy yogurts showed more than 10$\^$9/ CFU/ml and soy yogurts fermented by B. infantis showing below pH 4.6 showed more than 10$\^$9/ CFU/ml after storage at 4$^{\circ}C$ for 7 days. The activity of ${\alpha}$-galactosidase showed the highest in the culture of B. infantis among the Bifidobacteria tested. Among the Bifidobacteria tested, the contents of lactic acid and acetic acid showed the highest in soy yogurts fermented by B. infantis but citric acid and propionic acid were the lowest. Among the Bifidobacteria tested, the contents of n-hexanal showed the highest in soy yogurts fermented by B. breve and a little amounts of acetaldehyde were present in all soy yogurts.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1170-1176
• /
• 2016

The aim of this study was to investigate the effects of screw speed, moisture content, and die temperature on the physical properties of extruded soy protein isolate. Extrusion conditions were moisture content (20 and 25%) and die temperature (120, 130, and $140^{\circ}C$) at a fixed screw speed of 250 rpm. The other extrusion conditions for screw speed (150, 200, 250, 300, and 330 rpm) were a fixed moisture content and die temperature of 30% and $140^{\circ}C$, respectively. Specific mechanical energy input decreased as die temperature increased from 120 to $140^{\circ}C$, whereas specific mechanical energy input increased as screw speed increased from 150 to 330 rpm. Expansion ratio and specific length increased as die temperature increased. Breaking strength decreased as die temperature increased and moisture content decreased. A lower moisture content resulted in a greater color difference. Integrity index increased as die temperature increased from 120 to $140^{\circ}C$ and moisture content decreased from 25 to 20%. Nitrogen solubility index decreased as screw speed increased from 150 to 330 rpm. Nitrogen solubility index was lowest at $2.83{\pm}0.51%$ as screw speed decreased to 150 rpm. In conclusion, moisture content was a more important factor than die temperature for texturization of soy protein isolate.

• Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.87-96
• /
• 2023

This study was designed to determine the apparent digestibility coefficients of soybean meal, soy protein concentrate (SPC), soy protein isolate (SPI), rapeseed meal (RSM), pea protein concentrate (PPC), wheat gluten meal (WGM) and wheat flour (WF) for olive flounder, Paralichthys olivaceus. A reference diet (RF) was formulated to meet the nutrient requirements of olive flounder with 1% chromic oxide (Cr₂O₃) as an inert indicator. Test diets were prepared to contain 70% RF and 30% of the test ingredient. Olive flounder, averaging 150 ± 8.0 g, was cultured in 400-L fiberglass tanks at a density of 25 fish per tank. Fecal collection columns were attached to each tank. Fecal samples were obtained from triplicate groups of fish for 4 weeks. Dry matter digestibility of SPC (75%) and WGM (76%) were significantly higher than the other test ingredients. Protein digestibility of SPC (85%), PPC (88%) and WGM (89%) were significantly higher than the other test ingredients, and protein digestibility of RSM (77%) and WF (76%) was lower than the other ingredients tested. Lipid digestibility of SPC (72%) and SPI (69%) were significantly higher than the other test ingredients. Energy digestibility of SPC (85%) and WGM (82%) were significantly higher than that of others tested ingredients. The availability of amino acids in WGM was generally higher than in other plant-feed ingredients. Therefore, SPC and WGM were seems to be efficient as potential protein sources for olive flounder compared to other tested ingredients. Overall, findings of the current study may assist in more efficient and economical formulation of diets using plant feed ingredients for olive flounder.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.301-307
• /
• 2012

We investigated the effects of non-meat protein binders combined with glucono-${\delta}$-lactone (GdL) on the binding properties regarding restructured pork prepared by high-pressure treatment. Soy protein isolate (SPI), casein (CS), whey protein concentrate (WPC), and egg white (EW) were used as non-meat protein binders and compared with the control (no binder) and with the ${\kappa}$-carrageenan (KC) treatment. The compression and depression rates were 2.3 and 37 MPa/s, respectively, and pressurization was conducted at 200 MPa for 30 min at $4^{\circ}C$. After pressurization, the physical properties (pH, water-holding capacity, color, tensile strength, and microscopic structure) of the sample were evaluated. The combination of pressurization with acidification enabled cold-set meat binding, and the binding strength of restructured pork was enhanced by the addition of non-meat proteins. Among binders, SPI demonstrated the best efficiency in binding meat pieces. Therefore, the present study demonstrated that the combination of acidification and pressurization processes with the utilization of non-meat protein binders has a potential benefit in meat restructuring.

• Preventive Nutrition and Food Science
• /
• v.10 no.1
• /
• pp.88-91
• /
• 2005

To improve the physical properties of protein films, various plasticizers and cross-linking agents were used in the preparation of the films. For zein film, 3% polypropylene glycol with 3% glycerol was the best plasticizer, while 2.5% glycerol was the most suitable for soy protein isolate (SPI) film in terms of tensile strength (TS), % elongation, and water vapor permeability (WVP). Formaldehyde, glutaraldehyde, glyoxal, and cinnamaldehyde as cross-linking agents of protein films were used to further improve the physical properties of the films. All aldehydes used as cross-linking agent in this study improved TS of zein and SPI films. In particular, cinnamaldehyde was the best cross-linking agent due to its safety in foods. These results suggest that appropriate use of plasticizer and cross-linking agent like cinnamaldehyde should improve the physical properties of protein films for use in food packaging.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.564-569
• /
• 2000

An enzyme-linked immunosorbent assay(ELISA) was developed for the detection of milk proteins in processed foods. The ${\alpha}_{s1}-casein({\alpha}_{s1}-CN)$, a heat stable major milk protein, was immunized into rabbits to produce specific antibodies. When competitive indirect ELISA(ciELISA) using $anti-{\alpha}_{s1}-CN$ antibodies was established, its detection limit was $0.1\;{\mu}g/mL$. The reactivities of the specific antibodies toward ${\alpha}_{s1}-CN$, skim milk, ${\beta}-CN$ and whey protein isolate(WPI) were 100, 37, 0.14 and 0.04%, respectively, as determined by ciELISA. However $anti-{\alpha}_{s1}-CN$ antibodies did not have any reactivity to other milk proteins such as ${\beta}-lactoglobulin,\;{\alpha}-lactalbumin$, bovine serum albumin, and isolated soy protein. When sandwich ELISA was established, its detection limit was $0.01\;{\mu}g/mL$ which was 10 times more sensitive than that of ciELISA. In the spike test which was performed by adding 1-10% of whole CN to market milk, mean assay recovery as determined by sandwich ELISA was 94.8%(CV, 8.2%). Food stuffs and dairy products were assayed by sandwich ELISA to show 29, 0.13, 0.25, and 6.9% of whole CN in skim milk powder, WPI, semi-solid yoghurt, and processed cheese, respectively.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.36-42
• /
• 2009

This study was performed to develop low-fat/reduced-salt sausages (LFRSS; <3% fat and <1.5% salt) containing milk protein (whey protein concentrate, WPC, or sodium caseinate, SC) that showed the similar cooking yield and textural characteristics to those of regular-fat/salt sausage control (RFC; 20% fat and 1.5% salt) or low-fat sausage control (LFC; <3% fat and 1.5% salt). Low-fat sausages (LFS) were formulated with a 2.5% fat replacer (konjac flour:carrageenan:soy protein isolate=1:1:3) and various salt levels (0.75, 1.0, 1.25, and 1.5%). LFS had differences in color and expressible moisture (EM, %) values as compared to those of RFC. A minimum salt level of 1% and addition of nonmeat proteins were required to manufacture LFRSS that have similar characteristics to those of RFC. However, LFS with 2% milk proteins reduced the hardness and gumminess as compared to LFC. These results indicated that 1% milk protein in combined with 1% salt was a proper level for manufacturing of LFRSS.