• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.2
• /
• pp.188-194
• /
• 2023

Microbacterium elymi KUDC0405^T was isolated from the rhizosphere of Elymus tsukushiensis from the Dokdo Islands. The KUDC0405^T strain was Gram-stain-positive, non-spore forming, non-motile, and facultatively anaerobic bacteria. Strain KUDC0405^T was a rod-shaped bacterium with size dimensions of 0.3-0.4 × 0.7-0.8 ㎛. Based on 16S rRNA gene sequences, KUDC0405^T was most closely related to Microbacterium bovistercoris NEAU-LLE^T (97.8%) and Microbacterium pseudoresistens CC-5209^T (97.6%). The dDDH (digital DNA-DNA hybridization) values between KUDC0405^T and M. bovistercoris NEAU-LLE^T and M. pseudoresistens CC-5209^T were below 17.3% and 17.5%, respectively. The ANI (average nucleotide identity) values among strains KUDC0405^T, M. bovistercoris NEAU-LLE^T, and M. pseudoresistens CC-5209^T were 86.6% and 80.7%, respectively. The AAI (average amino acid identity) values were 64.66% and 64.97%, respectively, between KUDC0405^T and its closest related type strains. The genome contained 3,596 CDCs, three rRNAs, 46 tRNAs, and three non-coding RNAs (ncRNAs). The genomic DNA GC content was 70.4%. The polar lipids included diphosphatydilglycerol, glycolipid, phosphatydilglycerol, and unknown phospholipid, and the major fatty acids were anteiso-C_17:0 and iso-C_16:0. Strain KUDC0405^T contained MK-12 as the major menaquinone. Based on genotypic, phylogenetic, and phenotypic properties, strain KUDC0405^T should be considered a novel species within the genus Microbacterium, for which we propose the name M. elymi sp. nov., and the type strain as KUDC0405^T (=KCTC 49411^T, =CGMCC1.18472^T).

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.4
• /
• pp.163-170
• /
• 2008

Most of receiving rooms for the measurement of floor impact sound have rectangular shapes with couple of meters of dimension, with reflective finishing, no furniture, no curtains. Modal overlaps in those condition are the major reason for the low reproducibility, and as a matter of course, the low credibility. It is the major purpose of this study that searching for a better measurement method which mitigate the effect of modal overlap on measurement. Two ways of methods are tested. One is the way described in ISO standards which enables controlling the room modes of receiving rooms, the other is the way which enables to get more precise spatial averages in receiving rooms with room modes. It is not easy maintaining the reverberation time of low frequency bands in the range between 1s and 2s, though it is proven to be effective controlling the room modes with base traps. Space-time average SPL's through combinations of rotating microphones are easy to measure, and have good consistencies with average SPL of entire receiving room.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.148-157
• /
• 2019

An optimized analytical method for sodium iron chloriphyllin in foods was established and verified by using high performance liquid chromatography with attached diode array detection. An Inertsil ODS-2 column and methanol-water (80:20 containing 1% acetate) as a mobile phase were employed. The limit of detection and quantitation of sodium iron chloriphyllin were 0.1 and 0.3 mg/kg, respectively, and the linearity of calibration curve was excellent ($R^2=0.9999$). The accuracy and precision were 93.9~104.95% and 2.0~7.7% in both inter-day and intra-day tests. Recoveries for candy and salad dressing were ranged between 93 and 104% (relative standard deviation, (RSD) 0.3~4.3%), and between 83 and 115% (RSD 1.2~2.0%), respectively. Liquid chromatography mass spectrometry was used to verify the main components of sodium iron chlorophyllin which were Fe-isochlorin e4 and Fe-chlorin e4.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1972.03a
• /
• pp.5-6
• /
• 1972

Noise and air pollution, which accompany the development of industry and the increase of population, contribute to the deterioration of urban environment. The air pollution level of Seoul has gradually increased and the city residents are suffering from a high pollution of noise. If no measures were taken against pollution, the amount of emission of pollutant into air would be 36.7 thousand tons per year per square kilometer in 1975, three times more than that of 1970, and it would be the same level as that of United States in 1968. The main sources of air pollution in Seoul are the exhaust has from vehicles and the combustion of bunker-C oil for heating purpose. Thus, it is urgent that an exhaust gas cleaner should be instaled to every car and the fuel substituted by less sulfur-contained-oil to prevent the pollution. Transportation noise (vehicular noise and train noise) is the main component of urban noise problem. The average noise level in downtown area is about 75㏈ with maximum of 85㏈ and the vehicular homing was checked 100㏈ up and down. Therefore, the reduction of the number of bus-stop the strict regulation of homing in downtown area and a better maintenance of car should be an effective measures against noise pollution in urban areas. Within the distance of 200 metres from railroad, the train noise exceeds the limit specified by the pollution control law in Korea. Especially, the level of noise and steam-whistle of train as measured by the ISO evaluation can adversely affect the community activities of residents. To prevent environmental destruction, many developed countries have taken more positive action against worsening pollution and such an action is now urgently required in this country.

• Journal of Chest Surgery
• /
• v.29 no.10
• /
• pp.1055-1065
• /
• 1996

This experiment was undertaken to assess the effect of nitric oxide, isosorbide dinitrate, and sodium nitroprusside, which are known to increase coronary flow by vasodilation and to improve the cardiac function of an ischemic heart The experiment was carried out to investigate the effect of nitric oxide on the coronary artery of an ischemic rat myocardium using isolated constant pressure Langendorfr system. The experimental parameters were lactate and CK-MB for the frozen myocardium and coronary flow. the quantity of coyonary flow, left ventricular developed pressure (LVDP), and dp/dt. The experimental groups were decided as control group (Group I), nitric oxide group (Group II), Iso orbide dinitrate group (Group III) and sodium nitroprusside group (Group IV). Statistical analysis was performed using repeated measured analysis of variance and 2tudent t-test The results were as follows: 1 . The lactic acid contents of group II and IV were less than other groups for the frozen myocardium at preischemic state (p< 0.0025), whereas the determined coronary flows were higher. 2. In the ratio of produced lactic acid between the preischemia and reperfusion for the coronary flow, group II and IV exhibitrod less value than others (p< 0.005). 3. Group II and III were less than others in the coronary flow for the quantity of CK-MB, but or the frozen myocardium, group II and IV were less. 4. Group II and IV showed higher coronary flow compared to others throughout entire experimental period (p< 0.005). 5. Group II was highest at the preischemic state for the left ventricular developed pressure. 6. The +maximal dp/dt of group II was highest compared to others. 7. Group I exhibi ed the highest recovery rate of coronary flow between prelschemla and reperfusion. 8. The(-dp/dt)1(+dp/dt) ratio was 116%, 100%, 100%, and 55% for the 4 groups, respectively And the recovery rate of total dp/dt was 34%, 67%, 51%, and 76% for the four groups, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.77-86
• /
• 2002

Surfactant enhanced in-situ soil flushing was performed to remediate the soil and groundwater at an oil contaminated site, where had been used as a military vehicle repair area for 40 years. A section from the contaminated site (4.5 m $\times$ 4.5 m $\times$ 6.0 m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average $K_d$ of 2.0$\times$$10^{-4}$cm/sec. Two percent of sorbitan monooleate (POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminated section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed on a gas-chromatography (GC) for TPH concentration in the effluent with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit (WWDL). The effluent TPH concentration from wells with only water flushing was below 10 ppm. However, the effluent concentration using surfactant solution flushing increased to 1751 ppm, which was more than 170 times compared with the concentration with only water flushing. Total 18.5 kg of oil (TPH) was removed from the soil and groundwater at the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. The removal efficiency of surfactant enhanced in-situ flushing was investigated at the real contaminated site in Korea. Results suggest that in-situ soil flushing could be a successful process to remediate contaminated sites distributed in Korea.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.207-215
• /
• 2012

Six different mashing types ((A) $koji$+purified enzyme, (B) $koji$+crude enzyme, (C) $koji$+$nuruk$, (D) $koji$+purified enzyme+$nuruk$, (E) $koji$+crude enzyme+$nuruk$, (F) purified enzyme+$nuruk$) had been established, according to fermentation agents and a mixing rate of rice $makgeolli$, in this study. The alcohol content was the highest in the mashing type (C), which was 13.6%, followed by (D) 13.5%, (A) 13.1%, (B) 12.9%, (E) 12.7% and (F) 12.1%. The reducing sugar content of (A) was the highest with 401.6 mg% and those of (B), (C), (D) and (F) were between 337.3- 380.9 mg%. The alcohol components were found and tended to increase during the fermentation. The oligo-saccharides content was the highest in (D) with 1251.3 mg%, which was followed by (E) 1,219.2 mg%, (C) 1,141.4 mg%, (A) 1,049.9 mg% and 973.8 mg% in (B). The total free amino acid was highest in (B) with 781.4 mg% and followed by (C) 703.2 mg%, (D) 702.6 mg%, (E) 678.7 mg%, (A) 630.4 mg% and (F) 328.7 mg% in order. There were 16 different types of volatile flavor components, in the mashing types (A) and (B), in addition to 15 different types of those in type (C), as well as 14 different types of those in (D), (E) and (F). There were significant differences in the overall preference between the type (A) and (C).

• Journal of Sericultural and Entomological Science
• /
• v.22 no.1
• /
• pp.26-45
• /
• 1980

Silk protein is synthesized in the silkgland of silkworm, Bombyx mori L. It is evident that silk productivity is one of the high heritable characters from the genetical aspects. It is also changed with the environmental circumstances. With this regard, this paper dealt with the varietal patterns of silkgland development and the factors concerning to the silk productivity of silkgland of silkworm by the synthesis of nucleic acids, profiles of amino acids and histological basis, using the eight parent silkworm varieties and their F$_1$ hybrids. 1. The weight of silkgland per larva increased proportionally in the F$_1$ hybrids which were crossed between longer silk yielding varieties. The silk content to the weight of the silkgland was higher in the longer silk yielding varieties than that in the shorter silk yielding varieties. 2. It was observed that the morphological changes of nuclei took place in the posterior silkgland cells with the larval development of the 5th instar. In varietal aspect, Jam 107 and Jam 108, longer silk yielding varieties, showed more branches in nuclei than the $N_2$ and $C_{60}$ which were shorter yielding ones. 3. It was observed that there was a high correlation between RNA content per unit weight of silkgland on the 6th day stage of 5th instar and silk productivity both in the parents and their F$_1$ hybrids. 4. RNA and DNA synthesis brought about thirty percent increase in the posterior silkgland of the longer silk yielding varieties during the 2nd day to the 4th day stages of the 5th instar, when compared with those in the posterior silkgland of the shorter silk yielding varieties. 5. RNA/DNA ratio in the posterior silkgland on the 2nd day and 4th day stages of the 5th instar was more increased in the longer silk yielding varieties than the shorter silk yielding varieties. 6. It was shown that DNA content for the longer silk yielding varieties came to be 374$\mu\textrm{g}$ per larva in the posterior division of silkgland on the 4th day stage of 5th instar, whereas it was 199$\mu\textrm{g}$ per larva for the shorter silk yielding varieties. 7 There was 34.8％ Alanine, 22.8％ Glycine, 9.1％ Serine and 7.3％ Tyrosine in the posterior division of silkgland as major amino acids. It is noticed that there was a little differences between the amino acids composition of posterior silkgland and silk fibroin. 8. There was some differences in the amino acids composition of posterior silkgland between pure lines and their hybrids. Glycine, Serine and acidic amino acids, essential to silk formation, seemed to be increased in the F$_1$ hybrids, whereas other amino acids such as Valine, Iso-leucine, Leucine, Lysine. Phenylalanine, Histidine and Arginine were reduced. 9. The content of Glycine, Alanine and Serine in the posterior division of silkgland was elevated in the longer silk yielding varieties than the others. Consequently. these three amino acids in the posterior silkgland seemed to be related to the silk yielding ability in the longer silk yielding varieties.s.

• Radiation Oncology Journal
• /
• v.17 no.1
• /
• pp.84-88
• /
• 1999

Purpose :To develop a method for verifying a treatment setup in stereotactic radiotherapy by ma- tching portal images to DRRs. Materials and Methods : Four pairs of orthogonal portal images of one patient immobilized by a thermoplastic mask frame for fractionated stereotactic radiotherapy were compared with DRRs. Portal images are obtained in AP (anteriorfposterior) and lateral directions with a target localizer box containing fiducial markers attached to a stereotactic frame. DRRs superimposed over a planned iso-center and fiducial markers are printed out on transparent films. And then, they were overlaid over onhogonal penal images by matching anatomical structures. From three different kind of objects (isgcenter, fiducial markers, anatomical structure) on DRRs and portal images, the displacement error between anatomical structure and isocenters (overall setup error), the displacement error between anatomical structure and fiducial markers (irnrnobiliBation error), and the displacement error between fiducial markers and isocenters (localization error) were measured. Results : Localization error were 1.5$\pm$0.3 mm (AP), 0.9$\pm$0.3 mm (lateral), and immobilization errors were 1.9$\pm$0.5 mm (AP), 1.9$\pm$0.4 mm (lateral). In addition, overall setup errors were 1.0$\pm$0.9 mm (AP), 1.3$\pm$0.4 mm (lateral). From these orthogonal displacement errors, maximum 3D displacement errors($\sqrt{(\DeltaAP)^{2}+(\DeltaLat)^{2}$)) were found to be 1.7$\pm$0.4 mm for localization, 2.0$\pm$0.6 mm for immobilization, and 2.3$\pm$0.7 mm for overall treatment setup. Conclusion : By comparing orthogonal portal images with DRRs, we find out that it is possible to verify treatment setup directly in stereotactic radiotherapy.