• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.253-253
• /
• 2022

수문조사 방법 및 기준은 각 국가별 기후, 유역 및 하천특성에 따라 다르게 제시되고 있으며, 세계기상기구(WMO)나 국제표준화기구(ISO)에서는 국제적으로 통용될 수 있는 기준을 제시하고 있다. 대부분의 국가에서는 국제기구 또는 수문조사 선진국(미국, 일본, 영국 등)에서 제시한 기준 및 방법을 도입하여 적용하고 있으며, 국내의 경우도 국제기준과 더불어 미국의 기준과 우리나라와 기후, 지형 및 하천특성이 비슷한 일본의 기준을 많은 부분에서 도입하였다. 유속계에 의한 유량측정 시 측선수를 늘리면 정확도를 높일 수 있지만 대하천 또는 수위(유속)가 급변하는 경우에는 측선수를 많이 해서 측정시간이 길어지면 오히려 정확도를 떨어뜨릴 수 있다. 특히, 국내에서 홍수시 신속한 측정에 사용되는 부자와 전자파표면유속계는 기존의 회전식유속계 측선수 기준을 적용하는 것은 적합하지 않다. 이에 따라, 우리나라 수문조사 전담기관인 한국수자원조사기술원에서는 전자파표면유속계 측선수 기준을 실무적으로 제시하고 있으나 이에 대한 기술적인 검토가 부족한 실정이다. 본 연구에서는 2016년~2020년까지 한국수자원조사기술원에서 측정된 58개 지점의 총 739개의 전자파표면유속계 측정성과에 대하여 수면폭 및 측선수 현황을 살펴보았다. 한국수자원조사기술원 일반기준 이상 측선수 비율은 646개(87.4%), 긴급기준 이상 측선수 비율은 739개(100.0%) 그리고 전체 평균값 이상 측선수 비율은 404개(54.7%)로 나타났다. 일반기준 이상 측선수가 많은 원인을 파악해보기 위하여 측선수를 최대구간유량비 20% 이상일 때까지 측선수를 10%씩 감소하여 산정된 유량의 변화를 검토하였다. 유량 변화 검토 결과 현장에서 유량측정 시 측선수의 등유량 배치, 최대구간유량비(20%) 및 불확도(±10%) 기준을 준수하기 위해서 기준 이상의 측선수를 확보하는 경향으로 판단되었다. 이러한 문제를 해소하기 위하여 측선수 감소에 따른 유량 편차율 ±10%와 불확도 ±10% 조건을 만족하는 수면폭 구간별 최소 기준을 제시하였으며, 이 기준을 적용할 경우 전자파표면유속계로 현장에서 보다 신속하고 정확한 유량측정을 수행할 수 있을 것으로 기대된다.

• Journal of Veterinary Clinics
• /
• v.41 no.3
• /
• pp.178-182
• /
• 2024

A 10-year-old spayed female Poodle was referred for blindness. On ophthalmic examination, loss of bilateral ocular pupil light reflex, visual loss, and right retinal detachment were confirmed at a local hospital. Magnetic resonance imaging (MRI) of the brain was performed to identify the optic nerve, optic chiasm, and brain disease. A sessile mass centered on the region of the optic chiasm was identified. The mass had iso- to hypointense on fluid-attenuated inversion recovery and T2-weighted images and mildly hypointense on T1-weighted images compared to the gray matter, with strong contrast enhancement. Peripheral edema was also identified. Computed tomography (CT) brain perfusion was performed to obtain additional hemodynamic information about the patient using a multislice CT. CT perfusion showed that the cerebral blood volume in the left temporal lobe region (13.4 ± 1.6 mL/100 g) was decreased relative to the contralateral region (19.9 ± 0.3 mL/100 g). The patient showed decreased appetite and consciousness one week after the CT scan with clinical symptoms worsened. The patient had seizure, tetraparesis, and loss of consciousness. It was euthanized one month later at the request of the owner. This report suggests that CT brain perfusion can provide additional hemodynamic information such as insufficient brain perfusion in sellar region tumor which can help assess potential complications and prognosis and plan treatment.

• Korean Journal of Radiology
• /
• v.2 no.3
• /
• pp.132-137
• /
• 2001

Objective: The aim of our study was to describe and compare the radiologic findings of esophageal leiomyomas. Materials and Methods: The chest radiographic (n = 12), esophagographic (n = 12), CT (n = 12), and MR (n = 1) findings of surgically proven esophageal leiomyomas in 12 consecutive patients [ten men and two women aged 34 - 47 (mean, 39) years] were retrospectively reviewed. Results: The tumors, surgical specimens of which ranged from 9 to 90 mm in diameter, were located in the upper (n = 1), middle (n = 5), or lower esophagus (n = 6). In ten of the 12 patients, chest radiography revealed the tumors as mediastinal masses. Esophagography showed them as eccentric, smoothly elevated filling defects in 11 patients and a multilobulated encircling filling defect in one. In 11 of the 12 patients, enhanced CT scans revealed a smooth (n = 9) or lobulated (n = 2) tumor margin, and attenuation was homogeneously low (n = 7) or iso (n = 4). In one patient, the tumor signal seen on T2-weighted MR images was slightly high. Conclusion: Esophageal leiomyomas, located mainly in the middle or distal esophagus, are consistently shown by esophagography to be mainly eccentrically elevated filling defects and at CT, lesions showing homogeneous low or isoattenuation are demonstrated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.501-508
• /
• 2014

Objectives: This study identified the general characteristics of asbestos inspection/analysis laboratories in Korea and confirmed the actual situations in terms of technical aspects from these characteristics. In addition, given the background of the current problem, it offers preliminary data for determining future plans for improvement. Methods: A questionnaire was developed and distributed to the asbestos inspection/analysis laboratories that used the ISO/IEC 17025 for asbestos sampling and testing by UKAS(United Kingdom Accreditation Service) and the Korea Laboratory Accreditation Scheme(KOLAS). A total of 202 institutions in Korea were selected for the study and 145(71.8%) questionnaires were returned. Results: The number of personnel of the surveyed institutions averaged $4.2{\pm}2$ and 79.3% operated with less than five persons. In terms of education, the capital and other densely populated areas showed a high level of education(p<0.05). The level of education and facilities were determined by the magnitude of the institution(p<0.05). Institutions managed by highly educated directors were well-stocked with education and facilities(p<0.05). Institutions which had directors with considerable experiences received high scores overall and in particular higher scores in terms of education and facilities(p<0.05). At the level of the bottom five percent, the factor of education was 40.4% while the factor of measurement 49%, the factor of analysis 59%, the factor of facilities 61%, and the factor of survey 81%, respectively. Conclusions: To improve the quality of the institutions, in the short term, the problems identified in this study can be used to revise the related regulations. In the long term, a grading system of survey institutions needs to be established through the introduction of an accreditation system. However, the ongoing support of a government agency is required, including holding seminars and open education, suggesting guidelines for operation of asbestos inspection/analysis labs, and other means.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.508-514
• /
• 2010

This study was conducted to evaluate the effects of dietary arachidonic acid (AA, 20:4n-6) levels on growth performance and body composition in juvenile eel, Anguilla japonica. Six semi-purified experimental diets were formulated to be isonitrogenous and iso-caloric containing 55.0% crude protein and 15% crude lipid (18.3 kJ of available energy $g^{-1}$). Six different levels of AA were added to the basal diet, with 0, 0.2, 0.4, 0.6, 0.8 or 1.2% on a dry matter (DM) basis, respectively ($AA_{0.07},\;AA_{0.22},\;AA_{0.43},\;AA_{0.57},\;AA_{0.78}\;or\;AA_{1.23}$). After a conditioning period, fish initially averaging 27${\pm}$0.5 g (mean${\pm}$SD) were randomly distributed into each aquarium as triplicate groups of 20 fish each. One of six experimental diets was fed on a DM basis to fish in three randomly selected aquaria at a rate of 2-3% of total body weight twice a day. At the end of the 12-week feeding trial, weight gain (WG) and feed efficiency (FE) of fish fed $AA_{0.78}$ and $AA_{1.23}$ diets were significantly higher than of fish fed $AA_{0.07},\;AA_{0.22},\;AA_{0.43}$ diets (p<0.05). Specific growth rate (SGR) of fish fed the $AA_{0.78}$ diet was significantly higher than of fish fed $AA_{0.07},\;AA_{0.22},\;AA_{0.43}$ diets (p<0.05). However, there were no significant differences in WG, SGR and FE among fish fed $AA_{0.57},\;AA_{0.78}\;or\;AA_{1.23}$ diets (p>0.05). Whole body AA deposition of fish fed the $AA_{1.23}$ diet was significantly higher than for the other diets (p<0.05). Broken-line model analysis on the basis of WG and SGR indicated that the dietary AA requirement could be greater than 0.69% but less than 0.71% of the diet in juvenile eel. The growth-promoting activity of AA observed in the present study provides strong support for the contention that dietary AA is essential for juvenile eel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.100-110
• /
• 2016

Alkaline Peroxide Mechanical Pulping (APMP) of Pinus densiflora harvested from domestic mountains was explored. APMP contributes to various advantages including pulp quality, elimination of the need for a bleaching process, and energy savings. Sequential treatment of impregnation of bleaching chemicals and refining not only overcome the concern of alkaline darkening of wood chips during chemical impregnation, but it also brightens the chips to the desired brightness levels suitable for writing and printing papers. APMP pulping from Pinus densiflora was greatly influenced by the dosage levels of hydrogen peroxide and sodium hydroxide. Alkaline peroxide treatment was carried out by applying one of three levels of hydrogen peroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips) and one of three levels of sodium hydroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips). Other chemicals including a peroxide stabilizers and metal chelation were constantly added for all treatments. Chemical treatment with a liquor-to-wood ration of 9:1 was carried out in a laboratory digestor. Compared to BTMP, APMP pulping displayed outstanding characteristics including the less requirement of refining energy, the better improvement of tensile strength, the more reduction of shives, and the greater increase of pulp brightness. In particular, when 4.5% of hydrogen peroxide with impregnation during 90 minutes was used, the brightness of APMP reached 64.9% ISO. Even though bulk of APMP was decreased with the increase of sodium hydroxide, a better and improved balance could be achieved between optical and strength properties. The spent liquor obtained from the discharge of the impregnation process at the dosage level of 4.5% hydrogen peroxide exhibited an equal level of residual peroxide with BTMP. In conclusion, APMP pulping showed successful results with Pinus densiflora due to its better response to the development of optical and physical properties compared to TMP pulping.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.215-222
• /
• 2003

The Rietveld structure refinement for the natural trioctahedral mica, phlogopite-1M (Parker Mine, Quebec, Canada) has been done by high resolution neutron powder diffraction at $25^{\circ}C$ and -263$^{\circ}C$. The structural formula of phlogopite determined by electron probe microanalysis is $K_2$(M $g_{4.46}$F $e_{0.83}$A $l_{0.34}$ $Ti_{0.22}$)(S $i_{5.51}$A $l_{2.49}$) $O_{20}$(O $H_{3.59}$ $F_{0.41}$). Cell parameters are a=5.30∼5.31 $\AA$, b=9.18∼9.20 $\AA$, c=10.18∼10.21 $\AA$, $\beta$=100.06∼100.08$^{\circ}$. Refinements converged to R values in the range of $R_{p}$=2.35%, $R_{wp}$=3.01%, respectively. In this study, the OH bond length is calculated to 0.93 $\AA$ at room temperature and 1.03 $\AA$ at -263$^{\circ}C$, and the angles between OH vector and (001) plane are obtained 93.4$^{\circ}$∼93.6$^{\circ}$. The decrease in the length of OH with the increase in temperature should be due to the hydrogen bonding in the structure of phogopite.e.e.f phogopite.e.e.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.193-193
• /
• 2011

현재까지 대부분의 지열원 열펌프 시스템에 관한 연구는 열펌프 유닛과 지중열교환기에 대해 개별적으로 수행되었으며, 열펌프 유닛과 지중열교환기 설계 및 최적화의 공통변수인 지중순환수 유량에 따른 시스템 전체에 대한 연구성과는 매우 미미한 실정이다. 본 연구에서는 현재 국내에서 인증되어 보급되고 있는 물매물 지열원 열펌프 유닛의 성능 자료를 분석하고, 지중순환수 유량 변화에 따른 물대물 열펌프 유닛의 성능 실험 및 지중열교환기 형상에 관한 설계 및 분석을 수행하여 지열원 열펌프 시스템 최적화에 관한 기반 기술 확보하고자 하였다. 현재 국내의 물대물 지열원 열펌프 유닛의 냉방 및 난방 조건에서의 최소 인증 COP는 각각 4.1과 3.45이다. 다양한 용량 및 성능을 갖는 국내 인증 물대물 지열원 열펌프 유닛에 대한 정량적 성능 분석을 위하여 3.5kW(1RT) 용량당의 지중순환수 유량과 COP를 고찰하였다. 냉방운전시 3.5kW 단위 용량당 열펌프 유닛의 지중순환수 유량은 10.73에서 18.52LPM을 나타냈으며, 난방운전에는 10.41에서 18.16LPM을 나타냈다. 이때, 냉방 COP는 4.1에서 5.4의 값을 나타냈으며, 난방 COP는 각각 3.5에서 4.2를 나타냈다. 인증 열펌프 유닛에서 지중순환수 유량과 열펌프 유닛의 냉난방 성능은 일정한 경향성을 나타내지 않았다. 지중순환수 유량에 따른 지열원 열펌프 유닛과 시스템의 성능을 정량적으로 분석하고자 지중순환수 유량 변화에 따른 물대물 지열원 열펌프 유닛 성능 실험을 수행하고 이를 기반으로 지중열교환기를 설계 및 분석하였다. 냉난방 각 운전모드에서 ISO 13256-2 규격과 NRGT 101 규격을 기준으로 지중순환수와 부하측 유량 6LPM 에서 36LPM 사이에서 변화시키며 성능 실험을 수행하였다. 냉방 및 난방모드 모두 유량이 증가함에 따라 열펌프 유닛 COP가 증가하였으나, 유량 증가에 따른 열펌프 유닛 COP 증가율은 감소하였다. 지중순환수 유량이 18LPM 이상에서는 COP 상승폭은 미소하였다. 기존문헌의 부하 산정자료와 열펌프 유닛 실험 성능 데이터를 이용하여 지식경제부 고시 2009-332호에 준하여 수직밀폐형 지중열교환기를 설계하고 순환펌프 소요동력을 이용하여 시스템 COP를 분석하였다. 지중열교환기 설계 시 국내에서 가장 많이 사용되고 있는 상용지중열교환기 설계프로그램인 GLD 프로그램을 사용하였다. 지중순환수와 부하측 2차 유체 유량 증가 시에 열펌프 유닛 COP 증가율 대비 시스템 COP 증가율은 감소하였으며, 난방모드에서는 일정 유량 이상에서는 열펌프 유닛 COP는 증가하였으나, 시스템 COP는 감소하였다. 또한, 지중순환수 유량 증가에 따라 지중열교환기 길이가 증가하였으며, 냉난방시의 지중열교환기 길이차이가 증가하였다. 지열원 열펌프 시스템의 고효율화 및 시공비 절감을 통한 경제성 확보를 위해서는 지열원 열펌프 유닛 성능과 지중열교환기 형상 공통 변수인 지중순환수 유량을 함께 고려하여 시스템을 설계하여야한다.

• Journal of Digital Convergence
• /
• v.16 no.6
• /
• pp.407-416
• /
• 2018

The purpose of this study is to evaluate elite high school kayaker's iso-kinetic muscle function and provide physical training advices. Biodex system IV, Biodex stabilizer system, Inbody 3.0 and CNP-5403 are used to investigate 11 kayaker's muscle function(peak torque, average power and work fatigue), dynamic balance, body compositions, and flexibility. S4, S5, S8, S10, S11 are needed to train shoulder muscle strength and power. S5, S6, S10, S11 are needed to strengthen shoulder muscle endurance. S5, S7, S8, S10, S11 are needed to train knee muscle strength and power. S1, S4, S5, S10 are needed to strengthen knee muscle endurance. S3, S10, S11 are needed to train wrist muscle endurance. Based on these results we should establish an muscle function enhancing program with periodic inspection for elite kayakers. And standardized training program should be sublated.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.642-653
• /
• 2006

Purpose : The purpose of this study was to investigate the effect of the output energy(voltage) of laser welding on the strength and properties of joint of cast titanium(CP Gr II) and titanium alloy(Ti-6Al-4V). Material and method : Cast titanium and its alloy rods(ISO6871) were prepared and perpendicularly cut at the center of the rod. After the cut halves were fixed in a jig, and the joints welded with a laser-welding machine at several levels of output voltage of $200V{\sim}280V$. Uncut specimens served as the non-welded control specimens The pulse duration and pulse spot size employed in this study were 10ms and 1.0mm respectively. Tensile testing was conducted at a crosshead speed of 0.5mm/min. The ultimate tensile strength(MPa) was recorded, and the data (n=6) were statistically analyzed by one-way analysis of variance(ANOVA) and Scheffe's test at ${\alpha}$=0.05. The fracture surface of specimens investigated by scanning electron microscope (SEM). Vickers microhardness was measured under 500g load of 15seconds with the optimal condition of output voltage 280V. Results : The results of this study were obtained as follows, 1. When the pulse duration and spot size were fixed at 10ms and 1.0mm respectively, increasing the output energy(voltage) increased UTS values and penetration depth of laser welded to titanium and titanium alloy. 2. For the commercial titanium grade II, ultimate tensile strength(665.3MPa) of the specimens laser-welded at voltage of 280V were not statistically(p>0.05) different from the non-welded control specimens (680.2MPa). 3. For the titanium alloy(Ti-6Al-4V), ultimate tensile strength(988.3MPa) of the specimens laser-welded at voltage of 280V were statistically(p<0.05) different from the non-welded control specimens (665.0MPa). 4. The commercial titanium grade II and titanium alloy(Ti-6Al-4V) were Vickers microhardness values were increased in the fusion zone and there were no significant differences in base metal, heat-affected zone.