• The Journal of Advanced Prosthodontics
• /
• 제1권2호
• /
• pp.68-74
• /
• 2009

STATEMENT OF PROBLEM. When veneering composite resin-metal restoration is prepared, the fact that bond strength between Ti and composite resin is relatively weak should be considered. PURPOSE. The purpose of this study is to evaluate the shear bond strength between the veneering composite resin and commercial pure (CP) Ti / Ti-6Al-4V alloy according to the method of surface treatment. MATERIAL AND METHODS. The disks were cast by two types of metal. Their surfaces were treated by sandblasting, metal conditioner, TiN coating and silicoating respectively. After surface treatment, the disks were veneered by composite resin (Tescera$^{TM}$, Bisco, USA) which is 5 mm in diameter and 3 mm in thickness. The specimens were stored in water at $25^{\circ}C$ for 24 hours, and then evaluated for their shear bond strength by universal testing machine (STM-$5^{(R)}$, United Calibration, USA). These values were statistically analyzed. RESULTS. 1. All methods of surface treatment were used in this study satisfied the requirements of ISO 10477 which is the standard of polymer-based crown and bridge materials. 2. The metal conditioner treated group showed the highest value in shear bond strength of CP Ti, silicoated group, TiN coated group, sandblasted group, in following order. 3. The silicoated group showed the highest value in shear bond strength of Ti-6Al-4V alloy, metal conditioner treated group, sandblasted group, TiN coated group, in following order. CONCLUSION. Within the limitations of this study, all methods of surface treatment used in this study are clinically available.

• 한국통신학회논문지
• /
• 제40권5호
• /
• pp.871-885
• /
• 2015

본 연구에서는 우선 고속으로 태그 수집을 위한 2.4 GHz 능동형 RFID 시스템의 시뮬레이션 모델을 구축 하였다. 그리고 단순화 된 Collection 명령과 Ack 절차, 슬롯의 충돌 확률(k1)과 충돌이 발생한 슬롯의 평균 태그 수($k_2$)를 이용하여 태그수를 예측하는 새로운 방법을 제안하였다. 이들에 따른 능동형 RFID 시스템의 성능 추적을 구축한 시뮬레이션 모델을 통해 획득하였다. Query 명령을 사용하여 Collection 명령과 Ack를 간소화하고 $k_1$과 $k_2$를 이용하여 태그수를 예측하는 방법의 조합이 모든 성능 면에서 가장 우수한 것으로 나타났다. 이는 Query 명령을 이용한 Collection 명령과 Ack의 간소화는 태그 인식 속도를 줄이는데 기여했고 $k_1$과 $k_2$를 이용하여 태그수를 예측하는 방법은 Throughput을 향상시킬 뿐만 아니라 이로 인해 Collection 라운드 횟수를 줄여 태그 인식 속도를 줄일 수 있었다. 본 연구에서 제안한 방법은 Throughput, 평균 인식 시간, 1초 안의 평균 인식률 모두에서 이상적인 경우의 성능값과 매우 유사하게 나타나 제안한 방법의 유효성을 확인 할 수 있었다.

• 치위생과학회지
• /
• 제10권6호
• /
• pp.459-464
• /
• 2010

본 연구는 실리콘 고무인상재의 보관온도에 따른 작업 시간과 압축 시 변형율, 탄성회복율, 점조도에 관한 물리적 특성에 대해서 평가하였으며, 다음과 같은 결과를 얻었다. 1. 작업시간은 저온의 온도유지장치에서 보관한 인상재가 실온이나 고온에서 보관한 인 상재보다 유의하게 크게 나타났고(P<0.05), 실온과 고온에서 보관한 인상재는 유의차 가 없었다. 2. 압축변형율은 저온 온도유지장치에서 보관한 인상재가 실온이나 고온에서 보관한 인 상재보다 유의하게 컸으며(P<0.05), 실온과 고온에서 보관한 인상재는 유의차가 없 었다. 3. 탄성회복율은 인상재를 보관한 각 저장온도에 따라 유의한 차이가 있는 것으로 나타 났으며(P<0.05), 온도가 높아짐에 따라 증가하였다. 4. 점조도는 인상재를 보관한 각 저장온도에 따라 유의한 차이가 있는 것으로 나타났으 며(P<0.05), 온도가 높아짐에 따라 감소하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.534-541
• /
• 2008

This paper deals with the heat transfer characteristics of R-290 (Propane), R-600a (Iso-butane) and R-1270 (Propylene) as an environment friendly refrigerant and R-22 as a HCFC's refrigerant for evaporating. The experimental apparatus has been set-up as conventional vapor compression type refrigeration and air-conditioning system. The test section is a horizontal double pipe heat exchanger. Evaporating heat transfer measurements were performed for smooth tube with the outer diameters of 12.70, 9.52 and 6.35 mm and micro-fin tube 12.70 mm, respectively. For the smooth and micro-fin tubes measured in this study, the evaporating heat transfer coefficient was enhanced according to the increase of the mass flux and decrease of the tube diameter. The local evaporating heat transfer coefficients of hydrocarbon refrigerants were superior to those of R-22 and the maximum increasing rate of heat transfer coefficient was found in R-1270. The average evaporating heat transfer coefficients in hydrocarbon refrigerants showed 20 to 28% higher values than those of R-22. Also, the evaporating heat transfer coefficients of R-22 in the tube diameter of the 12.70 mm smooth and micro-fin tube were compared. Generally, the local heat transfer coefficients for both types of tubes increased with an increase of the mass flux. The heat transfer enhancement factor (EF) between smooth and micro-fin tube varied from 1.9 to 2.7 in all experimental conditions.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.462-466
• /
• 2010

하천을 횡단하며 유속을 측정하는 ADCP를 유속면적법과 같이 정해진 측선에 정지시켜 연직 유속을 측정하고 이를 단면적과 곱하여 유량을 산정하는 방법이 ADCP 정지측정법(Stationary Method)이다. 이 방법은 이미 괴산댐 하류에 적용되어 정지측정법 측정유량이 댐방류량 대비 평균 4%의 상대오차를 보여 효율성이 입증되었다. 본 연구에서는 일반 자연하천인 임진강 적성지점에 정지측정법을 적용하여 넓은 범위의 수위, 유량 변화에 대한 적용 가능성을 점검하였다. 또한 홍수기 널리 사용되는 측정방법인 부자법의 검증 수단으로서 적용 여부를 검토하였다. 2009년 7월부터 8월까지 총 26회 실시한 정지측정법은 1,046~9,663 $m^3/s$의 측정 유량 범위를 보였다. 측정기간 동안 단면평균 유속은 1.3~3.0m/s였으며, 측정 최대유속은 4.0m/s였다. 측정 소요시간은 23~46분으로 평균 35분 소요되었다. 같은 지점에서 실시한 봉부자법 측정이 평균 29분 소요한 것과 큰 차이가 없었다. ADCP를 이용한 정지측정법은 제조사에서 제공하는 전용 프로그램으로 측정과 동시에 수위, 단면 연직 유속 등의 확인이 가능하며, ISO 기준 불확실도 계산 기능을 포함한다. 대하천인 임진강 적성지점에서 실시한 ADCP 정지측정법은 봉부자법과 비슷한 측정시간이 소요되며 넓은 수위, 유량범위에서 측정이 가능한 방법으로 판단되었다. 기존의 유량측정이 수위, 유량에 따라 방법이 달라지고 측정 장비의 제약이 따르는 것에 반해 ADCP 정지측정법은 보다 넓은 수위, 유량 범위에서 적용이 가능하다. 즉, ADCP 정지 측정법은 평저수시뿐만 아니라 홍수시에도 유량 측정 가능한 방법이기 때문에 봉부자법 또는 초음파표면유속계와 같이 홍수시 사용되는 측정방법의 검증 수단으로서도 활용 가능할 것으로 판단된다.

• KIEAE Journal
• /
• 제16권4호
• /
• pp.71-77
• /
• 2016

Purpose : The energy saving in a residential building (apartment) sector is known as one of the effective solution of energy reduction. In South Korea, the government has recently reinforced regulations associated with the energy performance of buildings. However, there is a lack of research on the methods for the energy performance diagnosis that is used to analyze the wall thermal performance of the existing apartments. Because a reliable diagnosis is necessary to save the building energy, this study analyzed wall thermal performance of an existing apartment in Seoul. Method : This paper applied two methods for analysis of the thermal insulation performance; HFM(Heat Flow Meter) method and ASTR(Air-Surface Temperature Ratio) method. The HFM method is suggested by ISO9869-1 code to measure the thermal performance. The ASTR method is proposed by this study for the simplified In-situ measurement and it uses three temperature data (interior wall surface, interior and exterior air) and the overall heat transfer coefficient. This study conducted the experiment of an existing apartment in Seoul using these methods and analyzed the results. Furthermore, the energy simulation tool of the building was used to suggest retrofit of the building based on the results of measurements. Result : The error rate of HFM method and ASTR method was analyzed in about 17 to 20%. As the results of comparison between the initial design values of the wall and the measured values, the 26% degradation of insulation thermal performance was measured. Lastly, the energy simulation tool of the building shows 10.8% energy savings in accordance with the construction of suggested retrofit.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.263-272
• /
• 2016

Purpose: The purpose of this study is to measure and compare a degree of setting expansion of dental stone by time depending on the mixing methods and mixing ratios of dental stone, to compare the surface state of each specimen with the use of an optical camera with microscope, and thereby to provide a fundamental material for making dental prostheses. Methods: The test on setting expansion of dental stone is based on ISO 6873. With two different mixing ratios and three kinds of stone mixing methods, test groups were created, and a total of six types of specimens (N=30) were made. Based on the specimens, the setting expansion rate of each one was measured in each time slot of 24 hours, and the surface of the set stone was measured. Results: According to the analysis on setting expansion rate of stone, the setting expansion of the specimen that was created in the way of vacuum mixing at normal mixing ratio was 0.1944% at 120 minutes; the setting expansion of the specimen that was created in the way of vacuum mixing at the mixing ratio which was 40% higher than normal mixing ratio was 0.195% at 120 minutes; the setting expansion of the specimen that was created in the way of mixing with hands at normal mixing ratio and then removing bubbles in vacuum mixer was 0.196% at 120 minutes. Conclusion: The setting expansion rate of each dental stone specimen was significantly different with the lapse of time up to 24 hours(p<.001).

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.6354-6365
• /
• 2014

본 논문은 국내 녹색건축물인증제도와 독일의 지속가능한 건축물 인증제도의 평가항목을 비교하여 국내인증제도의 발전방향을 제시하는 것을 목적으로 한다. 오늘날 세계적으로 많은 친환경건축물 인증제도가 시행되고 있으나 상호 비교 가능한 평가항목은 제시되지 않은 상황이다. 이에 국제표준규격에서는 지속가능한 건축물에 대한 평가기준을 마련하였고 독일의 지속가능한 건축물 인증제도는 이러한 평가기준을 받아들인 최초의 인증기준이다. 녹색건축물인증제도를 독일의 지속가능한 인증제도와 비교한 결과 녹색건축물인증제도의 평가내용에는 환경측면(62.6%) 이외의 사회문화와 기능측면(25.4%), 경제측면(3.0%)의 평가항목을 가지고 있는 것으로 나타났다. 이는 앞으로 녹색건축물인증제도의 사회측면 및 경제측면의 평가항목개발에 중요한 방향을 제시한다.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.123-127
• /
• 2015

Objectives: Glide path preparation is recommended to reduce torsional failure of nickel-titanium (NiTi) rotary instruments and to prevent root canal transportation. This study evaluated whether the repetitive insertions of G-files to the working length maintain the apical size as well as provide sufficient lumen as a glide path for subsequent instrumentation. Materials and Methods: The G-file system (Micro-Mega) composed of G1 and G2 files for glide path preparation was used with the J-shaped, simulated resin canals. After inserting a G1 file twice, a G2 file was inserted to the working length 1, 4, 7, or 10 times for four each experimental group, respectively (n = 10). Then the canals were cleaned by copious irrigation, and lubricated with a separating gel medium. Canal replicas were made using silicone impression material, and the diameter of the replicas was measured at working length (D0) and 1 mm level (D1) under a scanning electron microscope. Data was analysed by one-way ANOVA and post-hoc tests (p = 0.05). Results: The diameter at D0 level did not show any significant difference between the 1, 2, 4, and 10 times of repetitive pecking insertions of G2 files at working length. However, 10 times of pecking motion with G2 file resulted in significantly larger canal diameter at D1 (p < 0.05). Conclusions: Under the limitations of this study, the repetitive insertion of a G2 file up to 10 times at working length created an adequate lumen for subsequent apical shaping with other rotary files bigger than International Organization for Standardization (ISO) size 20, without apical transportation at D0 level.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권4호
• /
• pp.7-15
• /
• 2017

Purpose: The Korean government has implemented a Barrier Free Certification System since 2008 to create a secure and convenient environment for the socially disadvantaged. The drastic increase in the number of BF-certification facilities is expected due to the revision of the system and increasing the number of certification institutions. An analysis of individual evaluation items needs to be made for the BF-Certification with public confidence. Method: Korean standard, International Standard(ISO/FDIS 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(${\ddot{O}}NORM$ B 1600, 2017) and Swiss Standard(Norm SIA 500 / SN 521 500, 2009) were investigated and analyzed. A comprehensive improvement plan is proposed by comparing details of the aforementioned standards and the evaluation items of BF-Certification. Results: Many problems arise in applying existing Barrier-free standards due to changes in population structure, environmental change and the use of powered wheelchairs. International standards are being improved to solve these problems. The korean standards also require improving of the Barrier Free Law and Certification System, which reflect these trends. In korean cases, standards such as the size of the doors (width and height), the Unobstructed Manoeuvring Space and Clear Space at the Latch side of the Door are required to improve standards in accordance with international standards. In addition, the expression of laws and evaluation items of BF-Certification should be clearly defined. And the application of visual contrast standards for the enhancement of perceptions presented in international standards should be considered. Implication: Barrier Free related legal standards and evaluation items of BF-Certification that are used in Korea are required to be revised in consideration of social and environmental changes. Comprehensive improvements should be made through detailed review.