• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9487-9494
• /
• 2014

Background: The size of a hepatic neoplasm is critical for staging, prognosis and selection of appropriate treatment. Our study aimed to compare the radiological size of solid hepatocellular carcinoma (HCC) masses on magnetic resonance imaging (MRI) with the pathological size in a Chinese population, and to elucidate discrepancies. Materials and Methods: A total of 178 consecutive patients diagnosed with HCC who underwent curative hepatic resection after enhanced MRI between July 2010 and October 2013 were retrospectively identified and analyzed. Pathological data of the whole removed tumors wereassessed and differences between radiological and pathological tumor size were identified. All patients were restaged using a modified Tumor-Node-Metastasis (TNM) staging system postoperatively according to the maximum diameter alteration. The lesions were classified as hypo-staged, iso-staged or hyper-staged for qualitative assessment. In the quantitative analysis, the relative pre and postoperative tumor size contrast ratio ($%{\Delta}size$) was also computed according to size intervals. In addition, the relationship between radiological and pathological tumor diameter variation and histologic grade was analyzed. Results: Pathological examination showed 85 (47.8%) patients were overestimated, 82 (46.1%) patients underestimated, while accurate measurement by MRI was found in 11 (6.2%) patients. Among the total subjects, 14 (7.9%) patients were hypo-staged and 15 (8.4%) were hyper-staged post-operatively. Accuracy of MRI for calculation and characterized staging was related to the lesion size, ranging from 83.1% to 87.4% (<2cm to ${\geq}5cm$, p=0.328) and from 62.5% to 89.1% (cT1 to cT4, p=0.006), respectively. Overall, MRI misjudged pathological size by 6.0 mm (p=0.588 ), and the greatest difference was observed in tumors <2cm (3.6 mm, $%{\Delta}size=16.9%$, p=0.028). No statistically significant difference was observed for moderately differentiated HCC (5.5mm, p=0.781). However, for well differentiated and poorly differentiated cases, radiographic tumor maximum diameter was significantly larger than the pathological maximum diameter by 3.15 mm and underestimated by 4.51 mm, respectively (p=0.034 and 0.020). Conclusions: A preoperative HCC tumor size measurement using MRI can provide relatively acceptable accuracy but may give rise to discrepancy in tumors in a certain size range or histologic grade. In pathological well differentiated subjects, the pathological tumor size was significantly overestimated, but underestimated in poorly differentiated HCC. The difference between radiological and pathological tumor size was greatest for tumors <2 cm. For some HCC patients, the size difference may have implications for the decision of resection, transplantation, ablation, or arterially directed therapy, and should be considered in staging or selecting the appropriate treatment tactics.

• The Journal of the Korean bone and joint tumor society
• /
• v.7 no.1
• /
• pp.28-35
• /
• 2001

Purpose : Authors investigated the efficiency of preoperative MRI in suspicious glomus tumor and the clinical outcomes after marginal excision. Materials and Methods : In 10 cases of glomus tumors in the fingers, authors retrospectively analyzed the clinical data, including previous trauma, treatment history, preoperative symptoms, physical examination, plain radiography, MRI (9 cases), pathological findings and postoperative complications. Results : The patients had pain in 10 cases, tenderness in 9 cases, cold sensitivity in 3 cases and edema in one case. MRI showed low signal (3 cases) or iso-signal (5) intensity on T1 weighted image, high signal intensity (8) on T2 weighted image, and all the lesions were enhanced in gadolinium enhancement images. The exact locations of glomus tumors were median in 6 cases, lateral in 5, lateral fold in 2 and pulp in 3 in transverse section and nail bed in 5 cases and nail matrix in 5 in sagittal section. Marginal excision was performed by lateral approach in one case and transungual in 9 cases. Histologically, all 10 cases were composed of solid sheets of round cells interrupted by thin-walled blood vessels. Most of clinical symptoms were disappeared in all cases after operation. Nail deformity was found in one case, which was originated from nail matrix, however, there was no recurrence. Summary : Clinical symptom was the most impotant factor in diagnosis of glomus tumor in the fingers. However, preoperative MRIs were helpful in patients, who had obscure pain or prolonged clinical symptoms with suspicious glomus tumors. Preoperative MRI might be one of the most useful tools for establishing the exact diagnosis and detecting the location of glomus tumors, in spite of the relatively high expenses.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.263-276
• /
• 2015

Purpose: The current study aimed to evaluate the reliability for the combined refractive power when a spherical lens and a cylindrical lens were overlapped in a trial frame. Methods: The refractive powers, central thickness and peripheral thickness of spherical trial lenses and cylindrical lenses with negative power were measured. The combined refractive power of the spherical and cylindrical lenses was measured by auto lens meter. Measurement was repeated by changing the insertion order, and their results were further compared with the calculated combined refractive power. Results: There was no correlation between the variation of central and peripheral thickness in trial lenses and that of the lens power. Among 79 trial lenses, 3 trial lenses wasn't met the international standard. The refractive power calculated by Gullstrand's formula that could compensate vertex distance had smaller difference with the estimated power when compared with that calculated by thin lens formula however, it was significantly different from the estimated power. The refractive powers were generally apparent regardless of the insertion order of a spherical lens and a cylindrical lens: thin lens formula > actual measurements > Gullstrand's formula. The error was only found in cylindrical power calculated by Gullstrand's formula when inserted a spherical lens inside and a cylindrical lens outside however, the error was found in both of cylindrical and spherical powers calculated by Gullstrand's formula when inserted as a opposite order. By comparing actual measurements of equivalent spherical power, the accuracy was higher and the possibility of over-correction was lower when inserted a spherical lens inside and a cylindrical lens outside. Conclusions: From the results, those were revealed that the combined refractive power is influenced by the factors other than the vertex distance and the refractive power varies in accordance with the insertion order of a spherical lens and a cylindrical lens. Thus, it can be suggested that the establishment of standard for these is neccesaty.

• Korean Journal of Poultry Science
• /
• v.18 no.1
• /
• pp.9-31
• /
• 1991

The purpose of this study was to investigate the effects of dietary methionine and lysine levels on laying hen performance. The level of protein was fixed 15% during whole experiment period, but the levels of methionine and lysine were 0.30% and 0.58% (Low), 0.32% and 0.64% (Medium), 0.35% and 0 70% (High), respectively. Total 288 laying pullets of 22 weeks age were reared from January 28, 1989 to March 23, 1990 for 60weeks. The results obtained were summarized as follows : 1. The e99 Productions were highest in medium treatment in phase I (22~42weeks of age), phase II (42~62 weeks of age) and phase III (62~82weeks of age) and especially, there was significant difference among treatments during phase II (P＜0.05). 2. Egg weight was significantly increased as the levels of methionine and lysine were increased up to methionine and lysine were 0.32% and 0.64%, respectively(P＜0.01). 3. Daily egg mass was highest when the levels of methionine and lysine were 0.32% and 0.64%, respectively and there were significant differences among treatments during phase I and phase II (P＜0.01) 4. Daily feed intake was increased as the levels of methionine and lysine were increased, and there was significant difference among treatments during phase III (P＜0.05). 5. Feed efficiency was best in medium treatment in phase I and phase II (P＜0.01) 6, Viability was highest in medium treatment, but there was no significant difference among treatments. 7. Nutrient utilizability of experimental diets was not significantly different among treatments. 8. Eviscerated yield was highest and abdominal fat accumulation was lowest in medium treatment, but there was no significant difference among treatments. 9. Egg shell quality and chemical composition of egg content were not different among treatments. 10. The feed cost per kg egg mass was lowest in medium treatment and there were significant differences among treatments in phase I, phase II and whole egg laying period(P＜0.05)

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.267-272
• /
• 2010

Screw-in effect is one of the unintended phenomena that occurs during the root canal preparation with nickel-titanium rotary files. The aim of this study was to compare the screw-in effect among various nickel-titanium rotary file systems. Six different nickel-titanium rotary instruments (ISO 20/.06 taper) were used: $K3^{TM}$ (SybronEndo, Glendora, CA, USA), $M_{two}$ (VDW GmbH, Munchen, Germany), NRT with safe-tip and with active tip (Mani Inc., Shioya-gun, Japan), ProFile$^{(R)}$ (Dentsply-Maillefer, Ballaigues, Switzerland) and ProTaper$^{(R)}$ (Dentsply-Maillefer, Ballaigues, Switzerland). For ProTaper$^{(R)}$, S2 was selected because it has size 20. Root canal instrumentations were done in sixty simulated single-curved resin root canals with a rotational speed of 300 rpm and single pecking motion. A special device was designed to measure the force of screw-in effect. A dynamometer of the device recorded the screw-in force during simulated canal preparation and the recorded data was stored in a computer with designed software (LCV-USE-VS, Lorenz Messtechnik GmbH, Alfdorf, Germany). The data were subjected to one-way ANOVA and Tukey's multiple range test for post-hoc test. P value of less than 0.05 was regarded significant. ProTaper$^{(R)}$ produced significantly more screw-in effects than any other instruments in the study (p < 0.001). $K3^{TM}$ produced significantly more screw-in effects than $M_{two}$, and ProFile$^{(R)}$ (p < 0.001). There was no significant difference among $M_{two}$, NRT, and ProFile$^{(R)}$ (p > 0.05), and between NRT with active tip and NRT with safe one neither (p > 0.05). From the result of the present study, it was concluded, therefore, that there seems significant differences of screw-in effect among the tested nickel-titanium rotary instruments. The radial lands and rake angle of nickel-titanium rotary instrument might be the cause of the difference.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1320-1324
• /
• 2005

Soybean (Glycine max L.) is an increasingly important food source and functional food. Platelet aggregation plays an important role in thrombogenesis and atherosclerosis. Here, we studied the anti-platelet aggregating effects of solvent extracts from Korean soybean varieties and isoflauone derivatives. Nine Korean soybean varieties were extracted by solvents (methanol and buthanol and their extracts was investigated for the inhibition against tile aggregation of washed rabbit platelets induced by collagen or thrombin. Maximal inhibition of buthanol extracts against platelet aggregation induced by collagen was $95\%$ in Black-kong and Jinpum - kong. The potency of their inhibition was in the following order : Black > Jinpum > Bokwang > Hwangkum > Pureun > Malli > Danbaek > Danyeob > Jangsu - kong. The Black - kong only seemed to produce the maximal inhibition against platelet aggregation induced by thrombin. Total isoflavone content measured was Jinpum-kong ($1347.8{\mu}g/g$) and Black-kong ($918.7{\mu}g/g$). Maximal inhibition of isoflavone derivatives against platelet aggregation induced by collagen was $97\%$ in genistein. The potency of their inhibition was in the following order: genistein>daidzein>genistin. The isoflavone derivatives did not affect the platelet aggregation induced by thrombin. However, Black-kong cortex seemed to Produce the optimal inhibition against platelet aggregation induced by collagen. These results suggest that Black-kong and Jinpum-kong may be a good source for antiplatelet agents, and their antiplatelet effect be related to tile content and the chemical structure with the number of -OH group and the attached glycoside in the isoflavone derivative.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.764-769
• /
• 1999

This study was designed to investigate the effects of sea tangle (Laminaria japonica) extract (Dasi-Ex group: dry base $4.0\%$) and fucoidan-added (Fuco-I, II, III group: fucoidan of $1,0\%,\;2.0\%,\;3.0\%$ added to Dasi-Ex) drinks on the formation of oxygen radicals and scavenger enzyme activities of stressed mice. ICR male mice (20 $\pm$2 g) were fed experimental diets and these drinks instead of water for 18 days including 4 days of sociopsychological stress. Dasi-Ex and Fuco-I, II and III groups resulted in a marked decreases $20\~40\%$ in basal oxygen radical (BOR) formation, and $15\~25\%$ in induced oxygen radical (IOR) formation compared with control group. Hydroxyl radical formations were significantly inhibited about $10\%$ in Dasi-Ex group, while remarkably inhibited $30\~40\%$ in Fuco-I, II and III groups. lipid peroxide (ISO) levels in Dasi-Ex group were not significantly different from those of control group, tut Fuco-I, II and III groups resulted in a significant decreases about $10\%$ in LPO levels compared with control group, Dasi-Ex, Fuco-I, II and III groups resulted in a marked decreases ($31\%,\;36\%,\;39\%$ and $42\%$, respectively) in oxidized protein levels through production of carbonyl group. Significant differences in nitric oxide (NO) levels in Dasi-Ex group were not obtained, but NO levels were slightly inhibited about $7\%$ in Fuco-I and II groups and $20\%$ in Fuco-III group compared with control group. Significant differences in superoxide dismutase (SOD) and catalase (CAT) activities in Dasi-Ex and Fuco-I groups were not obtained, but Fuco-II and III groups resulted in a significant increases $25\~40\%$ in SOD activities, and about $10\%$ in CAT activities compared with control group. These results suggest that the sociopsychological stress and aging process could be effectively inhibited by biological activity of sea tangle and fucoidan components.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.625-636
• /
• 2005

This study was conducted to determine effects of different ratios (3.5, 3.0 and 2.5) of nonfibrous carbohydrate (NFC) to ruminally degradable protein (RDP) on in vitro fermentation and lactation performance of dairy cows and optimum ratio of NFC to RDP in dairy rations. In vitro trial was conducted up to 12 hr with ruminal fluidtaken from ruminally cannulated Holstein cows. The level of dietary NFC did not affect ruminal pH. The ammonia-N concentration was not significantly different among treatments until 6 hr incubation, however, it was significantly (P < 0.05) decreased as the ratio of dietary NFC to RDP increased on 9 and 12 hr incubation. For volatile fatty acids, concentrations of both acetate and propionate were significantly (P < 0.05) increased on 3 hr incubation as dietary NFC contents of treatments increased, in other incubation times, they had no significant differences among treatments. Valerate and A:P ratio were not affected by the ratio of NFC to RDP. Isoacids and total VFAs were significantly (P < 0.05) increased with increasing dietary NFC contents and their values were highest in the treatment of 3.0 ratio. Meanwhile, for in vivo trial, 18 Holstein lactating cows were allotted to treatments in three groups of 6 cows. They were employed for 24 weeks to investigate nutrient intakes, and milk yield and composition according to different ratios of dietary NFC to RDP. Intakes of dry matter and energy were significantly (P < 0.01) increased, but NDF intake was significantly (P < 0.01) decreased as the ratio of dietary NFC to RDP increased. Milk yield for the ratio of 3.5 (32.7 kg) was significantly (P < 0.05) higher than those of other treatments. Milk fat (%) was significantly (P < 0.05) higher for the treatments of 3.0 (3.79 %) and 2.5 (3.79 %) than that (3.48 %) for the ratio of 3.5, but milk fat yield was not different among treatments. Contents and yields for milk protein and solids-not fat were linearly (P < 0.01) increased as the ratio of dietary NFC to RDP increased. However, milk urea nitrogen concentration was significantly (P < 0.05) decreased with increasing dietary NFC levels. Our results showed that the increasing level of NFC in the diet of dairy cows enhanced ruminal fermentation, N utilization and milk production and suggested that maximal fermentation and lactation performance were achieved when the dietary ratio of NFC to RDP was more than 3.0 in dairy rations.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.46-52
• /
• 1998

The hydrolysis rate of insecticidal buprofezin(IUPAC : tert-butylimino-3-isopropyl-5-phenylperhydro-1,3,5-thiadiazin-4-one) in the range of pH 2.0 and 12.0 have been examined in 15%(v/v) aqueous dioxane at $45^{\circ}C$. The hydrolysis mechanism of buprofezin is proposed from the pH-effect, solvent effect(${\ell}{\gg}m$), thermodynamic parameter(${\Delta}H^{\neq}$=11.12 $Kcal{\cdot}mol^{-1}$ &, ${\Delta}S^{\neq}=5.0e.u.$), rate equation and hydrolysis product, l-isopropyl-3-phenyl urea. General acid catalyzed hydrolysis and specific acid catalyzed($k_{H3O+}$) hydrolysis through $A-S_{E}2$ and A-2(or $A_{AC}2$) reaction mechanism with orbital-control reaction proceed below pH 8.0 and above pH 9.0, the nucleophilic addition-elimination, $Ad_{N}-E$ mechanism via tetrahedral($sp^{3}$) intermediate is initiation by general base catalyzed($k_{H2O}$) reaction. Buprofezin was more stable in alkaline ($k=10^{-8}sec.^{-1}$) than acid solutions from the sigmoid pH-rate profile. And the half-life($t=\frac{1}{2}$) of hydrolysis reaction in neutral aqueous solution(pH 7.0) at $45^{\circ}C$ was about 3 months.