• PNF and Movement
• /
• v.17 no.3
• /
• pp.421-429
• /
• 2019

Purpose: This study evaluated the relationship between pelvic pressure and irradiation of the proprioceptive neuromuscular facilitation (PNF) upper arm pattern exercises with an elastic band while in a sitting position. Methods: Fourteen subjects with asymptomatic pelvic pressure participated in this study. Pelvic pressure was measured using a Gaitview® system while sitting and performing PNF bilateral upper arm patterns. Resistance strength was provided by the blue elastic band. The statistical significance of the results was evaluated using a repeated one-way ANOVA and the independent t-test. The Bonferroni method was used for the post-hoc test. Results: The results revealed a significant change in the pelvic pressure when performing the PNF arm pattern. The average resistance pressure on the pelvis, with the elastic band, significantly increased after the initial sitting position (F=3.91, 3.92; p<0.05). No significant pelvic pressure changes were noted for each PNF upper arm pattern (p>0.05). Conclusion: The results of this study showed a positive relationship between pelvic pressure and the irradiation of PNF upper arm pattern exercises with resistance in the sitting position.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.543-550
• /
• 2012

The decrease in the fracture toughness of ferritic steels in a reactor pressure vessel is an important factor in determining the lifetime of a nuclear power plant. A surveillance program has been in place in Korea since 1979 to assess the structural integrity of RPV steels. In this work, the surveillance data were collected and analyzed statistically in order to derive the empirical relationship between the embrittlement and strengthening of irradiated reactor pressure vessel steels. There was a linear relationship between the yield strength change and the transition temperature shift change at 41 J due to irradiation. The proportional coefficient was about $0.5^{\circ}C$/MPa in the base metals (plate/forgings). The upper shelf energy decrease ratio was non-linearly proportional to the yield strength change, and most of the data lay along the trend curve of the US results. The transition regime temperature interval, ${\Delta}T_T$, was less than the US data. The overall change from irradiation was very similar to the US results. It is expected that the results of this study will be applied to basic research on the multiscale modeling of the irradiation embrittlement of RPV materials in Korea.

• Korean Journal of Materials Research
• /
• v.15 no.1
• /
• pp.42-46
• /
• 2005

In microelectronics packaging, the reliability of the metal/polymer interfaces is an important issue because the adhesion strength between dissimilar materials is often inherently poor. The modification of polymer sufaces by ion beam irradiation and rf plasma are commonly used to enhance the adhesion strength of the interface. T-peel strengths were measured using a Cu/polyimide system under varying $Ar^+$ ion beam irradiation pretreatment conditions. The measured T-peel strength showed reversed camel back shape regarding the fixed metal-layer thickness, which was quite different from the results of the $90^{\circ}$ peel test. The elementary analysis suggests that the variation of the T-peel strength is a combined outcome of the plastic bending work of the metal and polymer strips. The results indicate that the peel strength increases with $Ar^+$ ion beam irradiation energy at the fixed metal-layer thickness.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.31 no.2
• /
• pp.103-106
• /
• 2015

The oriental tobacco budworm, Helicoverpa assulta (Lepidoptera: Noctuidae), is classified as a quarantine pest that must be controlled for the exportation of Korean paprika to the USA. We performed a confirmatory test of gamma irradiation against the last-instar larvae and pupae of H. assulta in paprika. Previous, small-scale gamma irradiation at a dose of 100 Gy to the last-instar larvae allowed emergence of adults, though they were abnormal, but 200 Gy prevented adult emergence completely. For pupae, irradiation of 5- to 6-day-old pupae with 300 Gy prevented normal emergence completely. To gather confirmatory data applicable to phytosanitary quarantine regulations, larvae and pupae were placed inside paprika in a box and were irradiated with 200 Gy and 300 Gy, respectively. After irradiation with 200 Gy (measured doses 170-199 Gy) of 2,186 individuals of the last-instar larvae, 10.84% survived, but either formed abnormal pupae (7.57%) or died during the pupal stage (3.27%), resulting in no emergence of normal adults. For pupae, the dose of 300 Gy (measured doses 276-319 Gy) given to 1,200 pupae allowed 10.75% to survive and 9.17% to emerge with deformity. However, 1.58% of irradiated pupae emerged normally, requiring an increased dose for complete prevention of normal emergence. Subsequently, an increased dose of 400 Gy (measured doses 340-402 Gy) to 1,005 pupae allowed 88.35% to emerge, but all emerged with deformity. Thus, irradiation treatment with a minimum dose of 400 Gy will provide quarantine security for all premature H. assulta in exported paprika.

• Korean Journal of Food Science and Technology
• /
• v.18 no.6
• /
• pp.427-430
• /
• 1986

Ionizing irradiation and E.O were used for sterilization of 5 different types of spices and mixed spices, and then each treated sample was evaluated using rank-order test to compare the sensory quality of the E.O fumigated sample to that of the irradiated sample. Preference of tested samples was in the descending order of control, the irradiated and the fumigated samples. According to the results of analysis of variance. 5 spices were significantly different at the 1% (P<0.01) or 5% (P<0.05), while mixed spices showed no significance. The results of Duncan's multiple range test showed that there was no significance difference between control and the irradiated sample, while the E.O fumigated sample was significantly different from control and irradiated samples. In conclusion, no adverse effects was found in quality of spices by ionizing radiation for sterilization, but the E.O fumigated sample showed deterioration of quality. The results were corresponded with the changes in major physicochemical components of each sample.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.614-621
• /
• 2020

Antibiotic pollution is one of the factors contributing to the spread of antibiotic-resistant bacteria in the environment. Advanced oxidation and irradiation processes have been introduced to eliminate antibiotics from water and wastewater. However, few studies have reported the toxic effects of residual antibiotics and their byproducts induced by a treatment system. In this study, we compared the efficacies of chemical (high-performance liquid chromatography (HPLC)) and biological (antimicrobial susceptibility test) assays for measuring the concentrations of residual antibiotics after gamma irradiation for degrading amoxicillin, cephradine, lincomycin, and tetracycline. The concentrations of residual antibiotics estimated using the two assay methods were almost identical, except cephradine. In the case of cephradine, inhibited bacterial growth was observed that was equivalent to twice the concentration measured by HPLC in the samples subjected to gamma irradiation. The observed inhibition of bacterial growth suggested the generation of potentially toxic intermediates following antibiotic degradation. These results indicate that biological and chemical assays should be used in concert for monitoring antibiotic contamination and the toxic derivatives of antibiotic degradation. The results demonstrate that these four antibiotics can be decomposed by 2.0 kGy gamma-irradiation without toxic effects of their byproducts.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2015

PURPOSE: The purpose of this study is to investigate the effect of the physical therapy treatment room environment using microwave diathermy on the autonomic nervous system of human body. METHODS: Participants were 24 healthy adults. Standard deviation of all normal R-R intervals(SDNN), root mean square of successive differences(RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were compared in microwave irradiation and non-irradiation group. Data were analyzed in Wilcoxon's signed-ranks test and Mann-Whitney U test. RESULTS: Standard deviation of all normal R-R intervals (SDNN), root mean square of successive differences (RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were not significantly different in microwave irradiation group. Standard deviation of all normal R-R intervals(SDNN), root mean square of successive differences (RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were not significantly different in microwave non-irradiation group. Standard deviation of all normal R-R intervals(SDNN), root mean square of successive differences (RMSSD), low frequency(LF), high frequency(HF), LF/HF ratio were not significantly different between two groups. CONCLUSION: There was no significant change in the sympathetic nervous system and parasympathetic nervous system regardless of the presence of microwave irradiation. There was no significant change in the autonomic nervous system adaptability regardless of the presence of microwave irradiation.According to this study, microwave diathermy does not have significant effect on the autonomic nervous system.Future study is necessary to investigate the long term effect of the physical therapy treatment room environment using microwave diathermy on the autonomic nervous system of the human body.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.661-665
• /
• 2022

The 3 MeV proton irradiation effects on SiGe low noise amplifier (LNA) (NXP BGU7005) performance under different voltage supply VCC (0 V, 2.5 V) conditions were firstly experimental studied in this present work. The S parameters including S₁₁, S₂₂, S₂₁, 1 dB compression point and noise figure (NF) of the test samples under different bias voltage supply were measured and compared before and after 3 MeV proton irradiation. The total proton irradiation fluence was 1 × 10¹⁵ protons/cm². The maximum degradation quantities of the gain S₂₁ and NF of the test samples under zero bias are measured respectively 1.6 dB and 1.2 dB. Compared with the samples under 2.5 V bias supply, the maximum degradation of S₂₁ and NF are respectively 1.1 dB and 0.8 dB in the whole frequency band. It is noteworthy that the gain and NF of SiGe LNAs under zero-bias mode suffer enhanced degradation compared with those under normal bias supply. The key influence factors are discussed based on the correlation of the SiGe device and the LNA circuit. Different process of the ionization damage and displacement damage under zero-bias and 2.5 V bias voltage supply contributed to the degradation difference. The underlying physical mechanisms are analyzed and investigated.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.2
• /
• pp.63-68
• /
• 2011

PURPOSE. The object of this study was to investigate the effect of UV irradiation (by a general commercial UV sterilizer) on anodized titanium surface. Surface characteristics and cellular responses were compared between anodized titanium discs and UV irradiated anodized titanium discs. MATERIALS AND METHODS. Titanium discs were anodized and divided into the following groups: Group 1, anodized (control), and Goup 2, anodized and UV irradiated for 24 hours. The surface characteristics including contact angle, roughness, phase of oxide layer, and chemical elemental composition were inspected. The osteoblast-like human osteogenic sarcoma (HOS) cells were cultured on control and test group discs. Initial cellular attachment, MTS-based cell proliferation assay, and ALP synthesis level were compared between the two groups for the evaluation of cellular response. RESULTS. After UV irradiation, the contact angle decreased significantly (P<.001). The surface roughness and phase of oxide layer did not show definite changes, but carbon showed a considerable decrease after UV irradiation. Initial cell attachment was increased in test group (P=.004). Cells cultured on test group samples proliferated more actively (P=.009 at day 2, 5, and 7) and the ALP synthesis also increased in cells cultured on the test group (P=.016 at day 3, P=.009 at day 7 and 14). CONCLUSION. UV irradiation induced enhanced wettability, and increased initial cellular responses of HOS cells on anodized titanium surface.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.576-581
• /
• 2010

KAERI (Korea Atomic Energy Research Institute) fabricated MOX (Mixed Oxide) fuel pellets as a cooperation project with PSI (Paul Scherrer Institut) for an irradiation test in the Halden reactor. The MOX pellets were fitted into fuel rods that included instrumentation for measurement in IFE (Institutt for Energiteknikk). The fuel rods were assembled into the test rig and irradiated in the Halden reactor up to 50 MWd/kgHM. The irradiated fuel rods were transported to the IFE, where ceramography was carried out. The fuel rods were cut transversely at the relatively higher burn-up locations and then the radial cross sections were observed. Micrographs were analyzed using an image analysis program and grain sizes along the radial direction were measured by the linear intercept method. Radial cracks in the irradiated MOX were observed that were generally circumferentially closed at the pellet periphery and open in the hot central region. A circumferential crack was formed along the boundary between the dark central and the outer regions. The inner surface of the cladding was covered with an oxide layer. Pu-rich spots were observed in the outer region of the fuel pellets. The spots were surrounded by many small pores and contained some big pores inside. Metallic fission product precipitates were observed mainly in the central region and in the inside of the Pu spots. The average areal fractions of the metallic precipitates at the radial cross section were 0.41% for rod 6 and 0.32% for rod 3. In the periphery, pore density smaller than 2 ${\mu}m$ was higher than that of the other regions. The grain growth occurred from 10 ${\mu}m$ to 12 ${\mu}m$ in the central region of rod 6 during irradiation.