• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.748-753
• /
• 1998

Machine parameters need to measure in advance for vector control and theoretical analysis. Therefore, we present the machine parameter measurement scheme, considering stator iron loss, by the single-phase test at standstill condition. Using this method, the d-q axis inductances and the equivalent iron loss resistance in the voltage equation considering stator iron loss are easily measured. This method is simple and does not need to use complex theory and expensive equipment.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2353-2360
• /
• 2000

Statistical fatigue properties of metallic materials are increasingly required for reliability design purpose. In this study, static and fatigue tests were conducted and the normal, log-normal, two -parameter Weibull distributions at the 5% significance level are compared using the Kolmogorov-Smirnov goodness-of-fit test. Parameter estimation were compared with experimental results using the maximum likelihood method and least square method. It is found that two-parameter Weibull distribution and maximum likelihood method provide a good fit for static and fatigue life data. Therefore, it is applicable to the static and fatigue life analysis of the spheroidal graphite cast iron. The P-S-N curves were evaluated using log-normal distribution, which showed fatigue life behavior very well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.58-60
• /
• 1999

This paper presents dynamic performance prediction using Matlab / simulink after parameter estimation of synchronous reluctance motor considering iron loss. Test motor is 3 phase SynRM with the segmental rotor, rating power is 0.175KW. Experiment equipment is consists of testing motor, dynamometer, vector invertor dynamocontroller, and power analyser. The stator iron loss and rotor iron loss are modelled by additional windings on three-phase winding axis. These windings are transformed into d-q axis, and are represented as equivalent eddy current windings. P-Q circle diagram method and single phase standstill method are used to measure motor parameters considering iron loss.

• 한국전자파학회논문지
• /
• 제18권11호
• /
• pp.1318-1326
• /
• 2007

본 논문에서는 waffle-iron 도파관 여파기의 실용적인 설계 방법을 기술하였다. 설계 과정은 두 단계로 이루어진다. 첫 단계로는 waffle-iron 구조의 단일 window에 대해 EM S/W tool를 이용하여 S-파라미터를 구하고, ABCD 파라미터로 변환하여 K-인버터를 계산하고, 두 번째 단계는 분포 정수 원형 여파기와 일치되게 window의 크기를 최적화한다. 설계 방법을 검증하기 위해 위성통신용 Ka 대역 여파기를 설계하고 제작하였다. 측정 결과는 계산 결과와 비교하여 양호하게 일치하였다.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.55-61
• /
• 2003

This paper presents parameter measurement for permanent magnet synchronous motors based on the P-Q circle diagram. Three electrical parameters of permanent magnet synchronous motors, i.e., the equivalent iron loss resistance, armature inductance, and electrical motive force (emf) coefficient are simultaneously measured. The advantages of this method are that it can be implemented under constant excitation and it dispenses with the generating test for the emf coefficient. The proposed method is applied to a 160w permanent magnet synchronous motor, and then the measurement results are analyzed.

• 산업기술연구
• /
• 제20권B호
• /
• pp.3-8
• /
• 2000

Low cycle fatigue life of spheroidal graphite cast iron is determined by the morphological parameters of internal graphite. The aim of this study is to clarify the effect of the number of nodular grain of spheroidal graphite cast iron on low cycle fatigue life. Two specimens that have identical average nodular grain size by changing nodular grain volume fraction and different number of nodular grain count was tested. In this paper, the parameter governing fatigue life through fatigue test, the number of nodular grain seriously affect fatigue life and nodular grain size is no longer governing parameter of it.

• 대한화학회지
• /
• 제25권3호
• /
• pp.183-189
• /
• 1981

철광석 중에서 주성분 원소들인 철과 티탄올 희석 파라미터법(dilution parameter method)을 이용한 X-선 형광분석법으로 분석하였다. 조성이 비슷한 표준시료와 분석시료 각각에 적당한 희석제($ZrO_2$)를 가하여 적당한 비율 (1:1, 1:2등)로 희석시켜서 원하는 원소의 형광 X-선 세기를 측정하여 다음 식으로 희석 파라미터를 구한다.$Pa=\frac{\frac{I_{as}}{(I_{as})_d}}{D-1}{^{-1}}$이들 파라미터를 이용하여 표준시료와 분석시료의 matrix effect 차이를 보정하여 표준검량선 없이 정량 분석하였다.$W_a=W_a^*{\cdot}{\frac{I_as}{I_{as}^*}{\cdot}\frac{P_a^*}{P_a}$여기서, *는 표준시료를 표시한다. 분석결과는 습식법으로 정량한 값들과 잘 일치하고 재현성도 좋음을 보여주었다.

• 산업기술연구
• /
• 제18권
• /
• pp.203-208
• /
• 1998

Fatigue tests were performed to examine the 4 parameter method for specimens prepared by various heat treatment which resulted in different mechanical properties. Obtained main results are as follows. (1) Samples treated by austempering did not show the expected improvement of fatigue limit although hardness and strength increased. This is attributed to the fact that defect sensitivities of materials increase as increasing of hardness and tensile strength, it is also shown that the graphites acting as stress concentration place become larger by austempering heat treatment than by normal annealing. (2) It is very reasonable to predict the fatigue limit of ductile irons with 4 parameter method based on ${\sigma}_{TS}$, $H_v$, ${\Delta}K_{th}$ and ${\sqrt{area}}_{max}$. (3) The half-austempering treatment appeared to be more useful than the full-austempering method to improve the fatigue limit in the spheroidal graphite cast iron with multi defective material.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.855-858
• /
• 2003

Liquid Phase Epitaxy (LPE)법으로 Yttrium Iron Garnet (YIG:Y$_3$Fe$_{5}$O$_{12}$) 단결정 후막을 성장시킬 때 PbO계 응제에서는 Pb 이온이 성장되는 결정내로 혼입되어 성장된 막의 격자상수를 증가시키고, 일축 자기이방성 상수값(Ku)을 변화시키거나 전기 전도도를 변화시킨다. 또한 광 흡수율을 증가시키는 등의 성장된 막의 물성에 악영향을 미친다. 열처리 후 Pb 이온의 휘발로 인한 결정내의 농도감소로 성장된 단결정 후막의 격자상수가 평균 0.0115$\AA$ 감소하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.260-268
• /
• 2013

Based on classical Berotti discrete iron loss calculation model, the iron loss analysis mathematical model of alternator was proposed in this paper. Considering characteristics of high speed and changing frequency of the alternator, Maxwell 3-D model was built to analyze iron loss corresponding to each running speed in alternator. Based on iron loss model of alternator at rated speed, the rotor claw pole size was made an optimization design. The optimization results showed that alternator's output performance had been improved. A new idea was explored in size optimization design of claw pole alternator.