• 한국주조공학회지
• /
• 제10권1호
• /
• pp.64-70
• /
• 1990

In order to lower the cabon content of sintered products below the solubility of austenite, Fe-oxide was added to cast iron powder of which matrix was pearlite. And the effects of it on some sintering properties and mechanical properties were investigated. Roughly speaking, the linear shrinkage, density, and tensile strendth of sintered properties increased as the sintering temperature became higher, the size distribution of powder became finer, and the amount of Fe-oxide added became less. The maximum tensile strength of sintered products was $78㎏f/mm^2$ more or less, of which carbon content was 1.4% and sintering temperature was $1180^{\circ}C$.

• 대한수의학회지
• /
• 제54권4호
• /
• pp.245-252
• /
• 2014

This study was investigated the change of concentration and toxicity of thermally cross-linked superparamagnetic iron oxide nanoparticles (TCL-SPION) on tissues of Sprague-Dawley rats. TCL-SPION at the dose of 15 mg/kg body weight was intravenously injected into the tail vein of the male Sprague-Dawley rats. The fate of TCL-SPION in serum, urine and tissues was observed during 28 days. Serum iron level was maximal at 0.25 h post-injection and gradually declined thereafter. In addition, the sinusoids of liver and the red pulp area of spleen were mainly accumulated iron from 0.5 h to 28-day post-injection. In kidney, iron deposition was detected in the tubular area until 0.5 h after injection. Malondialdehyde concentration in the liver slightly increased with time and was not different with that at zero time. In the liver and spleen, TNF-${\alpha}$ and IL-6 levels of TS treated with TCL-SPION were not different with those of the control during the experimental period. From the results, TCL-SPION could stay fairly long-time in certain tissues after intravenous injection without toxicity. The results indicated that TCL-SPION might be useful and safe as a contrast for the diagnosis of cancer or a carrier of therapeutic reagents to treat diseases.

• Applied Microscopy
• /
• 제52권
• /
• pp.3.1-3.8
• /
• 2022

Our purpose in this study is to analyze the microstructural characteristics and constituent elements of inorganic substances added to the yellow ink and red ink pigments used in permanent makeup. We observed the microstructural properties of inorganic pigments added to the ink using a scanning electron microscopy (SEM) and analyzed the constituent elements of the inorganic pigment particles using an energy dispersive X-ray spectroscopy (EDX). In red wine-colored ink, cubic titanium dioxide with a diameter of 110 to 200 nm was the major component, and rod-shaped iron oxide was rarely observed. Most of the ingredients of taupe yellow ink were rod-shaped yellow iron oxide, and a small amount of cubic titanium dioxide was observed. Red wine-colored ink and taupe yellow ink contained lumps composed of titanium dioxide particles. In red wine-colored ink, lumps were formed by agglomeration. However, we observed that the surface of the lump composed of titanium dioxide in the taupe yellow ink had a smooth surface caused by external physical compression. The titanium dioxide particle mass which found in taupe yellow ink in this study is an artificial product. When this mass accumulates in the dermis, it may cause a color mismatch. Therefore, permanent makeup using fine pigments should be free of foreign substances that may cause trouble in the skin. In addition, there is a need to improve the quality of the ink so that the required color can be safe and long lasting in the dermis.

• 공업화학
• /
• 제32권5호
• /
• pp.556-561
• /
• 2021

최근 산화철 나노입자는 외부의 자기장에 반응하는 자성의 특성과 생체적합성이 뛰어나 약물전달시스템(drug delivery system, DDS)에 관한 많은 연구의 소재로 사용되어져 왔다. 본 연구에서는 마이크로니들(microneedles, MNs)의 매트릭스 물질로 HA (hyaluronic acid)와 CMC (carboxy methyl cellulose)를 이용하여 SIONs (superparamagnetic iron oxide nanoparticles)이 함유된 HA-SMNs (hyaluronic acid-superparamagnetic microneedles)와 CMC-SMNs (carboxy methyl cellulose-superparamagnetic microneedles)를 제조하였으며, SEM (scanning electron microscopic), SQUD-VSM (superconducting quantum interference device-vibrating sample magnetometer), FMMD (frequency mixing magnetic detection), 고분자 및 바이오 멤브레인을 이용하여 SMNs의 다양한 특성을 조사하였다. SQUID-VSM 측정 결과 SIONs이 포함된 HA-SMNs와 CMC-SMNs에서 초상자성의 특성이 나타났으며, FMMD 측정에서는 SIONs 농도가 증가함에 따라 신호 강도에 변화가 확인되었다. 또한 SMNs의 바이오 막을 통한 HA-SMNs와 CMC-SMNs의 투과도 분석에서는 각각 평균 92.5%와 98.5%의 피부 투과율이 조사되었다. 이러한 결과를 통해 SMNs 제형은 경피약물전달시스템(transdermal drug delivery system, TDDS) 및 MR(magnetic mesonance) molecular imaging 분야의 전달소재로 활용될 수 있을 것으로 기대한다.

• Advances in nano research
• /
• 제3권3호
• /
• pp.169-176
• /
• 2015

Iron nanoparticles were made by using the modified coprecipitation technique. Usually the characteristics of synthesised particles depend upon the process parameters such as the ratio of the iron ions, the pH of the solution, the molar concentration of base used, type of reactants and temperature. A modified coprecipitation method was adopted in this study. A magnetic stirrer was used for mixing and the morphology and nature of particles were observed after synthesis. Nanoparticles were characterised through XRD. Obtained nanoparticles showed the formation of magnetite and maghemite under citric acid and oxalic acid as stabilisers respectively. The size of nanoparticle was greatly affected by the use of different types of stabilisers. Results show that citric acid greatly reduced the obtained particle size. Particle size as small as 13 nm was obtained in this study. The effects of different kinds of nucleating agents were also observed and two different types of nucleating agents were used i.e. potassium hydroxide (KOH) and copper chloride ($CuCl_2$). Results show that the use of nucleating agent in general pushes the growth phase of nanoparticles towards the end of coprecipitation reaction. The particles obtained after addition of nucleating agent were greater in size than particles obtained by not utilising any nucleating agent. These particles have found widespread use in medical sciences, energy conservation and electronic sensing technology.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.55-60
• /
• 1998

The sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers, which are oligomer type surfactants were prepared by polymerization with fatty acid vinyl acetate. The ${\alpha}-sulfonation$ of fatty acid vinyl ester oligomers were carried by direct addition of sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS) in the aqueous suspension of iron oxide and titanium dioxide particles was evaluated by particle size distribution and zeta-potential measurement. As results, the particles of iron oxide and titanium dioxide were flocculated by addition of small amount of oligomer type anionic surfactants and sodium dodecyl sulfate(SDS), then the flocks redispersed by more addition of oligomer type anionic surfactants and SDS. The flocculation, redispersion process was observed in lower concentration range of oligomer type anionic surfactants than SDS. Especially, the dispersing action of sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer was better than sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer.

• Animal cells and systems
• /
• 제6권2호
• /
• pp.171-180
• /
• 2002

Nitric oxide has high affinity for iron, and thus it can cause intracellular iron loss. We tested the idea that intracellular iron can be the primary target of NO toxicity by comparing the signaling mechanisms involved in cell death caused by iron depletion and that caused by NO. Treatment of HL-60 cells with a NO donor, S-nitroso-N-acetyl-DL-penicillamine (SNAP), decreased the intracellular iron level rapidly as that observed with the iron chelator deferoxamine (DFO). Iron chelators such as DFO and mimosine could induce death of human leukemic HL-60 cells by a mechanism requiring activation of p38 kinase, c-Jun N-terminal kinase, caspase-3 and caspase-8. DFO and SNAP also caused release of cytochrome c from mitochondria. Inhibition of p38 kinase by a selective inhibitor, SB203580, abolished the NO and DFO-induced cell death, release of cytochrome c, and activation of caspase-3 and caspase-8, thus indicating that p38 kinase lies upstream in the cell death processes. In a parallel situation, the cells that are sensitive to NO showed similar sensitivity to DFO. Moreover, simultaneous addition of ferric citrate, an iron-containing compound, inhibited the SNAP and DFO-induced activation of caspases and also blocked the NO-mediated cell cycle arrest at $G_1$ phase. Collectively, our data implicate that the NO-induced cell death of tumor cells including HL-60 cells is mediated by depletion of iron and further suggest that activation of p38 kinase lies upstream of cytochrome c release and caspase activation involved in this apoptotic process.

• 보존과학회지
• /
• 제29권2호
• /
• pp.103-110
• /
• 2013

1900년대 초반에는 얇은 책의 제본에 스테이플러를 많이 이용하였다. 이러한 책들에서는 스테이플러의 심주위로 종이의 변색 및 바스라짐 현상이 관찰된다. 본 연구는 종이의 변색을 일으키는 물질의 동정 및 원인 규명을 목적으로 한다. 종이의 상태 관찰에는 광학현미경, SEM, 원소분석에는 EDX, 화학구조의 파악에는 FT-IR을 이용하였다. 또한 변색 원인 규명을 위하여, 5종류의 종이에 스테이플러 심을 박아 열화 실험을 행하였다. 그 결과, 스테이플러 심으로 사용되는 철의 산화물의 일종이 종이를 갈색으로 변색 시키며, 종이의 섬유를 짧아지게 하였다. 종이가 변색된 부분에서는 Fe가 높게 검출되었으며, FT-IR 분석 결과 $Fe_2O_3$로 밝혀졌다.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.111-118
• /
• 2019

Greenhouse gas emissions have a profound effect on global warming. Various environmental regulations have been introduced to reduce the emissions. The largest amount of greenhouse gases, including carbon dioxide, is produced in the steel industry. To decrease carbon dioxide emission, hydrogen-based iron oxide reduction, which can replace carbon-based reduction has received a great attention. Iron production generates various by-product gases, such as cokes oven gas (COG), blast furnace gas (BFG), and Linz-Donawitz gas (LDG). In particular, COG, due to its high concentrations of hydrogen and methane, can be reformed to become a major source of hydrogen for reducing iron oxide. Nevertheless, continuous COG cannot be supplied under actual operation condition of steel industry. To solve this problem, this study proposed to use two alternative COG-based fuel mixtures; one with natural gas and the other with biogas. Reforming study on two types of mixed gas were carried out to evaluate catalyst performance under a variety of operating conditions. In addition, methane conversion and product composition were investigated both theoretically and experimentally.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.617-621
• /
• 2010

($K_{0.5}Na_{0.5}$)($Nb_{0.96}Sb_{0.04}$)$O_3$+1.2 mol% $K_4CuNb_8O_{23}$ ceramics doped with iron oxide ($Fe_2O_3$) were prepared by a conventional mixed oxide method. And then, their piezoelectric and dielectric properties were investigated as a function of $Fe_2O_3$ addition. X-ray diffraction studies reveal that $Fe^{3+}$ diffuses into the NKN lattices to form a solid solution with a pure perovskite structure at room temperature. At the sintering temperature of $1,060^{\circ}C$, when 0.2 mol% $Fe_2O_3$ was doped, the piezoelectric constant ($d_{33}$), electromechanical coupling factor (Kp), and mechanical quality factor ($Q_m$) showed the excellent values of 131.67 pC/N, 0.436, and 696.36, respectively. Results show that $Fe_2O_3$ deped ($K_{0.5}Na_{0.5}$)($Nb_{0.96}Sb_{0.04}$)$O_3$+1.2 mol% $K_4CuNb_8O_{23}$ lead-free piezoelectric ceramics are a promising lead free material for piezoelectric transformer applications.