• Journal of Environmental Science International
• /
• v.28 no.4
• /
• pp.413-422
• /
• 2019

The objective of this study was to estimate the trends of air quality in the study area by analyzing monthly and seasonal concentration trends obtained from sampled data. To this aim, the mass concentrations of $PM_{2.5}$ in the air were analyzed, as well as those of metals, ions, and total carbon within the $PM_{2.5}$. The mean concentration of $PM_{2.5}$ was $22.7{\mu}g/m^3$. The mass composition of $PM_{2.5}$ was as follows: 31.1% of ionic species, 2.2% of metallic species, and 26.7% of carbonic species (EC and OC). Ionic species, especially sulfate, ammonium, and nitrate, were the most abundant in the $PM_{2.5}$ and exhibited a high correlation coefficient with the mass concentration of $PM_{2.5}$. Seasonal variations of $PM_{2.5}$ showed a similar pattern to those of ionic and metallic species, with high concentrations during winter and spring. $PM_{2.5}$ also had a high correlation with the ionic species $NO_3{^-}$ and $NH_4{^+}$. In addition, $NH_4{^+}$ was highly correlated with $NO_3{^-}$. Through factor analysis, we identified four controlling factors, and determined the pollution sources using the United States Environmental Protection Agency(U.S. EPA) pollution profile. The first factor, accounting for 19.1% of $PM_{2.5}$ was attributed to motor vehicles and heating-related sources: the second factor indicated industry-related sources and secondary particles, and the other factors indicated soil, industry-related and marine sources. However, the pollution profile used in this study may be somewhat different from the actual situation in Korea, since it was obtained from US EPA. Therefore, to more accurately estimate the pollutants present in the air, a pollution profile for Korea should be produced.

• The Korean Journal of Ceramics
• /
• v.5 no.3
• /
• pp.288-295
• /
• 1999

Partial conductivities contributed by electron holes, oxygen ions, and protons were caluclated in $SrZr_{0.95}Y_{0.05}O_{2.975}$, using the reported formulae derived from the defect chemistry of HTPCs. Required parameters were obtained from the graphical analysis of total conductivity variation against partial pressure of water vapor and oxygen. Predicted overall conductivities showed a reasonable agreement with experimental measurements. The conductivity of the material showed a linear increase with square root of the water vapor pressure. This increase was due to proton conduction in an almost pure ionic conductivity. The calculation of partial conductivities at $800^{\circ}C$ resulted in an almost pure ionic conductivity at $P_{02}=10^{-10}$ atm and a predominant hole conductivity at $P_{02}=10^{-10}$ atm. Pure proton conduction was not expected at this temperature, contrary to the earlier reports. Discussions were made in relation with reported thermodynamic data and defect structure of the material. It was shown that from the total conductivity dependence on water vapor pressure, the pure ionic conductivity at low oxygen partial pressures could be separated into protonic and oxygen ionic conductivity in $ZrO_2$-based HTPCs.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.113-116
• /
• 1962

In this study we have measured the activity coefficients of NaCl in solution by E.M.F. method, depending upon MacInnes' equation at 25 dog. The cell (electrodes) is same as MacInnes' except the cock which was designed by ourselves as figure 1.Additionally, we have calculated the hydration number of NaCl from the activity coefficients using Robinson's equation and ionic hydration number according to our new formula $\frac{n_M{^+}+0.8}{n_A{^-}-0.1}=n_{MA}$, which was mentioned our former thesis.We also have calculated the hydration number of some salts from the ionic hydration number using upper formula and have got reasonable series match with other's value.As the results of our studying, we conclude it as follow;1) Liquid junction potential depend only on the bulk concentration of the both solution.2) The formula $\frac{n_M{^+}+0.8}{{n_A{^-}}-0.1}=n_{MA}$ is reasonable one in deducing to ionic hydration number.3) From upper relation, we can calculate the hydration number of unknown salts from it's ionic hydration numbers.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.580-586
• /
• 2002

We investigated the effect of ionic component on crystalline morphology development during isothermal annealing in a sodium neutralized sulfonated poly(ethylene terephthalate) ionomer (Ion-PET) by time-resolved small-angle x-ray scattering (TR-SAX S) using synchrotron radiation. At early stage in Ion-PET, SAXS intensity at a low annealing temperature (Ta = 120 $^{\circ}C)$ decreased monotonously with scattering angle for a while. Then SAXS profile showed a peak and the peak position progressively moved to wider angles with isothermal annealing time. Finally, the peak intensity decreased, shifting the peak angle to wider angle. It is revealed that ionic aggregates (multiplets structure) of several nm, calculated by Debye-Bueche plot, are formed at early stage. They seem to accelerate the crystallization rate and make fine crystallites without spherulite formation (supported by optical microscopy observation). From decrease of peak intensity in SAXS,it is suggested that new lamellae are inserted between the preformed lamellae so that the concentration of ionic multiplets in amorphous region decreases to lower the electron density difference between lamellar crystal and amorphous region. In addition, analysis on the annealing at a high temperature (Ta = 210 $^{\circ}C)$ by optical microscopy, light scattering and transmission electron microscopy shows a formation of spherulite, no ionic aggregates, the retarded crystallization rate and a high level of lamellar orientation.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.8-13
• /
• 2011

Interfacial compatibility between the Si-Cu electrode and diluted ionic liquid electrolyte containing 50 vol.% of 1M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)/1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide (MPP-TFSI) and 50 vol.% dimethyl carbonate (DMC) in a lithium cell and dilution effect on surface chemistry are examined. ex-situ ATR FTIR analysis results reveal that the surface of the Si-Cu electrode cycled in the diluted ionic liquid electrolyte is effectively passivated with the SEI layer mainly composed of carboxylate salts-containing polymeric compounds produced by the decomposition of DMC. Surface species by the decomposition of TFSI anion and MPP cation are found to be relatively in a very low concentration level. Passivation of electrode surface with the SEI species contributes to protect from further interfacial reactions and to preserve the electrode structure over 200 cycles, delivering discharge capacity of > 1670 $mAhg^{-1}$ and capacity retention of 88% of maximum discharge capacity.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.121-128
• /
• 2019

Supercapacitors are attracting much attention in sensor, military and space applications due to their excellent thermal stability and non-explosion. The ionic liquid is more thermally stable than other electrolytes and can be used as a high temperature electrolyte, but it is not easy to realize a high temperature energy device because the separator shrinks at high temperature. Here, we report a study on electrochemical supercapacitors using a composite electrolyte film that does not require a separator. The composite electrolyte is composed of thermoplastic polyurethane, ionic liquid and fumed silica nanoparticles, and it acts as a separator as well as an electrolyte. The silica nanoparticles at the optimum mass concentration of 4wt% increase the ionic conductivity of the composite electrolyte and shows a low interfacial resistance. The 5 wt% polyurethane in the composite electrolyte exhibits excellent electrochemical properties. At $175^{\circ}C$, the capacitance of the supercapacitor using our free standing composite electrolyte is 220 F/g, which is 25 times higher than that at room temperature. This study has many potential applications in the electrolyte of next generation energy storage devices.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.865-875
• /
• 2016

In this study, mass concentrations and chemical compositions of $PM_{2.5}$, including water-soluble ions and elements were determined at the 1,100 m-highland of Mt. Hallasan in Jeju Island across four seasons from August 2013 to August 2014. The average mass concentration of $PM_{2.5}$ was $12.5{\pm}8.41{\mu}g/m^3$ with 45.8% of the contribution from eight water-soluble ionic species. Three ionic species ($SO{_4}^{2-}$, $NH{_4}^+$, and $NO{_3}^-$) comprised 96.2% of the total concentration of ions contained in $PM_{2.5}$ and were the dominant ions, accounting for 43.5% of the $PM_{2.5}$ mass at Mt. Hallasan. On the basis of the mass concentration level, seasonal variation, enrichment factor, and relationship among elements, we can presume that Mg, K, Ca, Mn, Fe, Co, Sr, Ba, Nd, and Dy originated mainly from crust or soil and that V, Cr, Ni, Cu, Zn, As, Cd, and Pb were significantly enriched in $PM_{2.5}$ owing to the effects of the anthropogenic emissions. These results and the local distribution of emission sources and topographic characteristics near this sampling site suggest that the compositions of $PM_{2.5}$ collected at the 1100 m-highland of Mt. Hallasan were largely influenced by inflow from outside of Jeju Island.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.5
• /
• pp.352-357
• /
• 2001

Cadmium (Cd) has been identified as a potential contaminant in agricultural and environmental soils. Ionic condition in the soils is an important factor to influence Cd availability. In this study, the effect of sulfate or nitrate application on Cd sorption in acidic and calcareous soils was investigated. The Cd, sulfate $(SO_4)$, and nitrate $(NO_3)$ sources were solutions of $CdCl_2$, $K_2SO_4$, and $KNO_3$, respectively. The soil-solution system pH was affected by the application of sulfate or nitrate in both acidic and calcareous soil system, but there was not clear pH difference between pre- and simultaneous applications of sulfate or nitrate (PAS/PAN or SAS/SAN). Solution ionic strength (I) values were similar between the acid and calcareous soil systems after applying the Cd even though it was significantly different in the untreated control soils. However after applying the sulfate or nitrate, the I values increased and were always higher with SAS/SAN treatments. Solution Cd concentration also increased with the application of sulfate or nitrate. However, the Cd concentration in soil solution controlled by Cd sorption in the systems was different between PAS/PAN and SAS/SAN treatments only in the calcareous soil system, but not in the acidic soil system. The difference in Cd concentration between SAS/SAN and PAS/PAN in the calcareous systems may be caused by system pH, ionic strength, complexation, and predominately, competition of the $Cd^{2-}$ with the index $K^+$ ion. Potassium ion-Cd competition in the acidic soil system may be minimized because of the abundance of hydrogen ions.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.422-426
• /
• 2004

Solid polymer electrolytes based on poly(ethylene glycol)-polyurethane (PEG-PU) complexed with LiClO$_4$ salt have been prepared by the solvent casting method. A PEG-PU material (PEG:4,4'-diphenylmethane diisocyanate: l,4-butanediol = 1:2:1) was synthesized through a typical two-step condensation reaction. We investigated the effects of the salt concentration on the ionic conductivity ($\sigma$) and the glass transition temperature (T$_{g}$ ) of the complex electrolytes by using alternating current impedance spectroscopy, differential scanning calorimetry, and dynamic mechanical thermal analysis. The measured values of both $\sigma$ and T$_{g}$ exhibited similar tendencies in that they had maxima within the range studied, probably because of two opposite effects, i.e., the increased number of carrier ions and the decreased chain mobility (or increased T$_{g}$ ) caused by the increase in the salt concentration. The highest conductivity, on the order of 2.43 ${\times}$ 10$^{6}$ S$cm^{-1}$ /, was obtained at an [O]/[Li$^{+}$] ratio of ca. 16 (0.92 ㏖ salt per kg of matrix polymer).

• Journal of Biomedical Engineering Research
• /
• v.36 no.6
• /
• pp.291-295
• /
• 2015

Various types of implantable drug delivery devices have attracted significant attention for several decades to improve drug bioavailability and reduce side effects, thus enhancing therapeutic efficacy and patients' compliance. However, when implanted into the body, the devices may be influenced by the changes in physiological condition, such as temperature, pH or ionic concentration. Thus, the drug release rates could be also altered concurrently. Therefore, in this work, we employed an implantable ALZET$^{(R)}$ Osmotic Pump, which has been widely used to locally deliver various therapeutic agents and examined the effect of pH, temperature and ionic concentration on its drug release rate. For this, we performed in vitro cell tests to simulate the condition of local tissues influenced by the altered drug release rates, where we used diclofenac sodium as a model drug.