• 공업화학
• /
• 제21권2호
• /
• pp.129-136
• /
• 2010

이온성 액체는 휘발성이 거의 없고, 열적 안정성이 높으며, 탄화수소화물에 잘 섞이지 않고, 다양한 무기 및 유기금속 화합물을 쉽게 용해시킬 뿐만 아니라 전기전도도가 높고 산도와 염기도를 용이하게 조절할 수 있는 등 독특한 물리화학적 성질로 인하여 청정용매, 촉매, 분리, 전해질, 바이오 분야에서 다양하게 응용되고 있다. 본 총설에서는 이온성 액체에 대한 기본지식과 함께 현재 이온성 액체를 응용한 상용화 예를 포함하여 이온성 액체의 다양한 활용분야, 특히 $CO_{2}$ 흡수 및 전환분야에 대한 최근 연구 동향을 기술하였다.

• Journal of Microbiology and Biotechnology
• /
• 제15권4호
• /
• pp.780-786
• /
• 2005

The biomass of the brown seaweed, Ecklonia, was used to remove Cr(VI) from wastewater. Previously, Cr(VI) was removed through its reduction to Cr(III) when brought into contact with the biomass. In this study, the effects of ionic strength, background electrolytes, and Cr(III), Ni(II), Zn(II), and Fe(III) on the Cr(VI) reduction were examined. An increased ionic strength inhibited the Cr(VI) reduction. The presence of other heavy metals, such as Cr(III), Ni(II), or Zn(II), only slightly affected the Cr(VI) reduction, while Fe(III) enhanced the reduction. Although the above various parameters could affect the reduction rate of Cr(VI) by Ecklonia biomass, these effects were relatively smaller than those of pH and temperature. In addition, the previously derived rate equation was found to be applicable over a range of ionic strengths and with different background electrolytes. In conclusion, Ecklonia, bioniass may be a good candidate as a biosorbent for the removal of Cr(VI) from wastewaters containing various other impurities, and scale-up to a practical process may be accomplished using the previously derived rate equation.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.732-738
• /
• 2011

고압 반응시스템에서 요소와 메탄올로부터 메틸카바메이트(MC) 및 디메틸카보네이트(DMC)의 제조에 관한 금속산화물촉매와 이온성액체의 영향을 고찰하였다. 고립계에서 요소와 메탄올로부터 MC 수율은 촉매를 사용하지 않고도 $150^{\circ}C$ 이상의 반응온도에서 거의 100%를 나타내었으나, DMC 수율은 반응온도와 무관하게 1.5% 이하로 매우 낮은값을 나타내었다. 또한 MC와 메탄올로부터 DMC 수율은 $ZnCl_{2}$ 촉매를 사용한 경우에 가장 우수하였으며, 최적조건에서 16.3% 정도를 나타내었다. DMC 수율은 반연속식 실험에서 나노 크기의 촉매와 이온성액체를 함께 적용한 경우에 좀 더 향상되었다.

• Journal of Electrochemical Science and Technology
• /
• 제7권1호
• /
• pp.13-26
• /
• 2016

Nanoparticles (NPs), which have been investigated intensively as electrocatalysts, are usually synthesized by chemical methods that allow precise size and shape control. However, it is difficult to control the components and compositions of alloy NPs. On the other hand, the conventional physical method, sputtering with solid substrates, allows for facile composition control but size control is difficult. Recently, “liquid medium sputtering” has been suggested as an alternative method that is capable of combining the advantages of the chemical and conventional physical methods. In this review, we will discuss NP synthesis via the liquid medium sputtering technique using ionic liquid and low-volatile polymer media. In addition, potential applications of the technique, including the generation of oxygen reduction reaction electrocatalysts, will be discussed.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.12-19
• /
• 2002

Nanofiltration of aqueous dye solutions was carried out using polyamide (PA) nanofiltration (NF) composite membranes. The PA composite membranes were prepared by the interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on the surface of microporous polysulfone (PSf) ultrafi1tration (UF) membranes. After characterization in terms of their permeation performance and surface ionic property, they were used for the separation of dye solutions such as Direct Red 75, 80, 81, and Direct Yellow 8 and 27. The separation conditions were varied to study the factors affecting on the permeation performance of the membranes: different concentrations of dye solutions, operating temperature and time, and flow rate of a feed solution. The surface property of the membrane, especially its ionic property, as a function of operating time was examined with a zeta-potentiometer and the relationship between the surface chemistry of the membrane and its permeation properties was also studied.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1999년도 제3회 총회 및 추계학술발표회
• /
• pp.6-7
• /
• 1999

• Bulletin of the Korean Chemical Society
• /
• 제13권4호
• /
• pp.453-455
• /
• 1992

• 공업화학
• /
• 제17권6호
• /
• pp.586-590
• /
• 2006

전기활성 고분자로서 이온성고분자-금속복합체(Ionic Polymer metal Composites, IPMC)는 화학적 환원방법으로 비교적 쉽게 제조하여 낮은 구동전압에서도 큰 변위를 낼 수 있는 유연성을 지니는 스마트 소재(soft smart material) 중의 하나이다. 제조 시의 화학적 환원방법은 용액 내에서 반응시킴으로써 결과적으로 형성되는 다공성 고분자 막의 표면의 거칠기 때문에 구동체로서의 IPMC의 동작특성에 결함을 줄 수 있다. 따라서 본 연구에서는 IPMC의 표면의 거칠기에 대한 구동 특성을 비교하고 표면 조도를 향상시키는 방안으로 표면 이온빔 보조 증착법으로 표면을 개질하였다. 이러한 표면 개질 효과로 인해 IPMC 전극의 표면 저항을 낮추고 반응 속도를 증가시킬 수 있었고, 표면 조도, 모폴로지, 구동력 등을 측정하여 향상된 구동 현상을 나타내는 제조방법에 대한 연구를 하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2001년도 제13회 심포지엄 : 분리막 청정기술과 전기투석
• /
• pp.41-47
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1480-1484
• /
• 2012

We report a series of novel imidazolium iodides based ionic liquids (NMIPHI, NAIPHI, and NBIPHI) with different functional groups for the development of a quasi-solid type electrolyte for dye-sensitized solar cells (DSSCs). The diffusion coefficients of redox ions ($I^-$ and $I_3{^-}$) are dependent on the molecular weight and it was higher for lighter salts. Among the three ionic liquids, NMIPHI showed highest efficiency of 4.18% when it was used in a liquid electrolyte of a DSSC with $ca$. 6 ${\mu}m$ thick $TiO_2$ mesoporous film. Even though the efficiency was $ca$. 19% lower than that obtained from a liquid electrolyte composed of PMII. When NMIPHI was mixed with PMII with a molar ratio of 1:1 in a solvent free electrolyte, the efficiency of the DSSCs was enhanced compared to that based on pristine PMII.