• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.257-265
• /
• 2010

The objective of study was carried out to investigate the proper nutrient nitrogen concentration and irrigation period for increasing plant growth and flowering in Ardisia pusilla. Nutrient nitrogen concentrations were 120, 150, 180 and $210\;mg{\cdot}L^{-1}$ and they were based on the Sonneveld solution. Irrigation periods were divided into ED (except dormancy) and TG (total growth) according to plant age. The results of plant age and irrigation period, growth of 1 year-old plant was promoted by nitrogen concentration above $150\;mg{\cdot}L^{-1}$ regardless of irrigation period. And plant growth values of 2 years-old in TG treatments were higher than ED treatments, especially TG-180 treatment was best of all. The contents of total nitrogen of leaves after flowering were increased with nutrient nitrogen strength. And the contents of potassium, calcium, magnesium and phosphate slightly were decreased or were no significant differences. Plant growth and flowering decreased when nitrogen concentration was over $210\;mg{\cdot}L^{-1}$. Therefore, TG-150 and TG-180 were supposed to be appropriate treatment for plant growth and flowering of 1year-old plant and 2 years old plant, respectively.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.242-256
• /
• 2003

This study aimed to determine the relationship between rainfall-discharge patterns and maior aquatic environmental factors in a river-type reservoir. Specifically, daily monitoring was conducted in Paltang Reservoir from January 1999 to December 2001. Observation of the daily changes of the environment factors showed that natural meteorological factors and hydrological factors causing the change of water discharge had a major effect on the aquatic environment. Rainfall was the main source of hydrological changes, with its frequency a possible direct variable governing the range of discharge changes. Rainfall was weak in November${\sim}$May and heavy in June${\sim}$October (heavist in summer). The range of water discharge was greatest during summer (July to September) and lowest during winter (January to February). A principal component analysis (PCA) showed that aquatic environmental factors could be classified into three different types in the pattern of annual variation. First, type I included water temperature, turbidity, water color and organic matter (COD), which increased with increasing water discharge. Second, type ll consisted of DO and pH, which decreased with increasing water discharge. Third, type III included conductivity, alkalinity and chloride ion, which showed middle values with increasing water discharge. Monthly variation of aquatic environments explained by the first two dimensions of the PCA suggests that aquatic environments of Paltang Reservoir may have annual cycle typical of river-type reservoirs depending on hydrological factor such as water discharge.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.443-451
• /
• 1988

New crown ether dye-Ⅰ and dye-Ⅱ having an azo group(-N=N-) were synthesized from monobenzo-15-crown-5 and dibenzo-18-crown-6. These dyes showed ${\lambda}_{max}$ of 377 and 383nm respectively. The complexes of alkali metal ions ($Na^+$, $K^+$, $Cs^+$) with dye ligands showed band shift (390~400nm) and intensity increased. For a given anion, the extraction constants are in the order of $K^+$ < $Cs^+$ < $Na^+$ for dye-Ⅰ and $Cs^+$ < $Na^+$ < $K^+$ for dye-Ⅱ. These results show that the selectivity of crown ethers toward the alkali metal ions is dependant on the charge density of cation and the size of crown ether cavity. For a given cation, the order of the extraction constant is $Cl^-$ < $Br^-$ < $I^-$ < picrate. This order coincides with the degree of anion solvation effect.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.611-615
• /
• 2001

Y$_2$O$_3$ thin films have been proposed as a buffering insulator of metal/ferroelectric/insulator/semiconductor field effect transistor(MFISFET)-type ferroelectric random access memory (FRAM). In this study, $Y_2$O$_3$ thin films were etched with inductively coupled plasma(ICP). The etch rates of $Y_2$O$_3$ and YMnO$_3$, and the selectivity of $Y_2$O$_3$ to YMnO$_3$ were investigated by varying Cl$_2$/(Cl$_2$＋Ar) gas mixing ratio. The maximum etch rate of $Y_2$O$_3$, and the selectivity of $Y_2$O$_3$ to YMnO$_3$ were 302$\AA$/min, and 2.4 at Cl$_2$/(Cl$_2$＋Ar) gas mixing ratio of 0.2 respectively. Optical emission spectroscopy(OES) was used to understand the effects of gas combination on the etch rate of $Y_2$O$_3$ thin film. The surface reaction of the etched $Y_2$O$_3$ thin films was investigated by x-ray photoelectron spectroscopy (XPS). XPS analysis confirmed that there was chemical reaction between Y and Cl. This result was confirmed by secondary ion mass spectroscopy(SIMS) analysis.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.56-64
• /
• 1996

The objective of this investigation is to establish the rejection characteristics of caesium and cobalt from radioactive liquid waste by chemical/ultrafiltration process. An extensive experimental investigation was conducted with inactive caesium and cobalt ions, utilizing ultrafiltration stirred cell. Caesium and cobalt could be effectively removed from waste solution using copper ferrocyanide and polyarcylic acid(PAA). The rejection dependence of the caesium was found to be a function of caesiun to potassium copper ferrocyanide feed molar ratio. The binding behavior of caesium on K$_2$Cu$_3$(Fe(CN)$\sub$6/)$_2$, particles was explained in terms of a Langmuir adsorption isotherm. When Cs/K$_2$Cu$_3$(Fe(CN)$\sub$6/)$_2$molar ratio was 1.5, the removal of caesium was the most efficient. The rejection efficiency of cobalt is dependent upon various parameters such as pH, cobalt concentration and PAA concentration. The rejection behavior of cobalt was explained in term of a equilibrium model taking into account the reaction between the ligand group, the proton and the cobalt ion. At the conditions of PAA/Co ratio of 2 and pH of 5.6, the removal of cobalt was over 90%. Also, the effect of chemical addition sequence for the simultaneously removal of caesiun and cobalt was discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.29-37
• /
• 2007

To evaluate the effect of carbonization temperature of charcoal on the heavy metal adsorption property, Quercus mongolica wood and Larix kaempferi bark powder (100~60 mesh) were carbonized at between 400 and $900^{\circ}C$ at intervals of $100^{\circ}C$. In the properties of carbonized materials which affect the adsorption ability, pH increased with increasing the carbonization temperature, so that the pHs of wood and bark charcoal carbonized at $900^{\circ}C$ were 10.8 and 10.4, respectively. Also, in both materials, the carbon content ratio became larger as the carbonization temperature was raised. At the same carbonization temperature, carbon content ratio of the bark charcoal tended to be greater than that of the wood charcoal. In case of iodine adsorption which indicates the adsorption property in liquid phase, the wood charcoal showed higher adsorption value than the bark charcoal. From the investigation of adsorptive elimination properties of the charcoals against 15 ppm Cd, Zn, and Cu, the higher the carbonization temperature, the greater elimination ratio was. In comparison, the wood charcoal presented higher elimination ratio than that of the bark charcoal. In the wood charcoals carbonized at higher than $500^{\circ}C$, especially, 0.2 g of the charcoal was enough to eliminated almost 100% of the heavy metal ions. Heavy metal ion elimination ratio of the charcoals depended on the kinds of adsorbates. The effectiveness of adsorbates in adsorptive elimination by the charcoals were in order of Cu > Cd > Zn. This is because the physicochemical interaction between the adsorbate and adsorbent affects their adsorption properties, it is considered that subsequent researches are needed to improve the effectiveness of heavy metal adsorption by the charcoals.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.273-279
• /
• 2003

The purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars using methylmethacrylate-butyl acrylate(MMA/BA) latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. From the test results, we knew that the pore volume of polymer-modified mortars using MMA/BA latexes at bound MMA contents of 60 and 70 percent is 7.5∼75nm and the fine pore volume is increased with an increase in the polymer-cement ratio. The total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio. In general, the superior compressive strength of polymer-modified mortars using MMA/BA latexes is obtained at a bound MMA content of 70 percent and a polymer-cement ratio of 15%. And, the water absorption and chloride ion penetration depth are greatly affected by the polymer-cement ratio rather than the bound MMA content. The important factors affecting the properties of polymer-modified mortars using MMA/BA latexes polymerized with various monomer ratios are the variations of the pore size distribution with changing bound MMA content and the polymer-cement ratio.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.572-582
• /
• 2004

Statement of problem: The clinical criteria of soft lining materials are resilience over an extended period, capability of forming a strong bond with denture base materials, dimensional stability, adequate tear strength, and color stability. Many researches and reports dealt with food colorants or denture cleanser, but not with fermented foods. Purpose : This study was designed to assess what fermented foods, such as soy sauce and red pepper paste that many Koreans have eaten, influence on the color stability of soft denture liners. Material and methods: The color differences (${\Delta}E^*$) were measured by spectrophotometer with different immersion time. For the procedure, thirty disk-shape specimens per 4 soft denture linears(Molloplast-$B^{(R)}$, Ufi Gel $SC^{(R)}$, Dura $Base^{(R)}$, Sofreliner $MS^{(R)}$) were fabricated with a thickness of 2mm and 16mm in diameter. Each 10 specimen were immersed into the beakers of fermented foods distilled water, and $L^*$, $a^*$, $b^*$ values were measured for the color difference(${\Delta}E^*$), on the 1st, 7th, and 28th day with spectrophotometer. Result and conclusion : 1. There were significant differences between samples(soy sauces, red pepper pastes, and distilled water) in Sofreliner $MS^{(R)}$ of 1st day after immersion(p<0.05). There were significant differences between samples in Sofieliner $MS^{(R)}$ and Ufi Gel $SC^{(R)}$ of 7th days after immersion(p<0.05). There were significant differences between samples in Molloplast-$B^{(R)}$ of 28th day after immers ion(p<0.05). 2. In red pepper pastes, ${\Delta}E^*$ values of Molloplast-$B^{(R)}$, Ufi Gel $SC^{(R)}$, Sofrelinev $MS^{(R)}$ weve higher than 3.3. Those values were not clinically acceptable. In soy sauces, ${\Delta}E^*$ values of all denture liners were lower than 3.3. ${\Delta}E^*$values of Ufi Gel $SC^{(R)}$ were higher than those of other denture liners 3. Based on the above results , red pepper paste causes more discoloration than soy sauce.

• Composites Research
• /
• v.30 no.1
• /
• pp.46-51
• /
• 2017

Structural battery has been researched extensively to combine the functions of the battery and structure without gravimetric or volumetric increments compared to their individual components. The main idea is to employ carbon fabric as the reinforcement and electrode, glass fabric as the separator, and solid-state electrolyte which can transfer load. However, state-of-the-art solid-state electrolytes do not have sufficient load carrying functionality and exhibiting appropriate ion conductivity simultaneously. Therefore, in this research, a system which has both battery and load carrying capabilities using glass fabric separator and liquid electrolyte was devised and tested to investigate the potential and feasibility of this structural battery system and observe electric properties. It was observed that elongating separator decreased electrical behavior stability. A possible cause of this phenomenon was the elongated glass fabric separator inadequately preventing the penetration of small particles of the cathode material into the anode. This problem was verified additionally by using a commercial separator. The characteristic of the glass fabric and the interface between the electrode and glass fabric needed to be further studied for the realization of such a load carrying structural battery system.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.209-220
• /
• 2015

The aim of this study was leaching valuable metal ions from mine waste rocks which were abandoned mine site using indigenous aerobic bacteria. In order to tolerate the the indigenous aerobic bacteria to the heavy metal ions they were repeatedly adapted in $CuSO_4{\cdot}5H_2O$ environment. As the repeated generation-adaptation progressed, the pH values of the growth-medium were gradually decreased. During bio-leaching experiments with indigenous aerobic bacteria raised in a heavy metal ion environment for 42 days, the pH of the leaching solution was decreased while increasing the adaptation period. The indigeous bacteria were much more active on the surface of Younhwa waste rocks which contained relatively few the chalcopyrite and Cu content than the Goseong mine waste rocks, and also the amount of Cu and Fe ions were leached more in the Younhwa sample(leaching rate of 92.79% and 55.88%, respectively) than the Goseong sample(leaching rate of 66.77% and 21.83%, respectively). Accordingly, it is confirmed that valuable metal ions can be leached from the mine waste rocks, if any indigenous bacteria which inhabits a mine environment site for a long time with heavy metal ions can be used, and these bacteria can be progressively adapted in the growth-solutions containing the target heavy metals.