• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.78-83
• /
• 2015

The method of electrical discharge machining (EDM), one of the processing methods based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. Modern ED machinery is capable of machining geometrically complex or hard material components, that are precise and difficult-to-machine such as heat treated tool steels, composites, super alloys, ceramics, etc. This paper reports the results of an experimental investigation by Taguchi method carried out to study the effects of machining parameters on material surface roughness in electric discharge machining of SM45C. The work material was ED machined with graphite and copper electrodes by varying the pulsed current, voltage and pulse time. Investigations indicate that the surface roughness is strongly depend on pulsed current.

• Steel and Composite Structures
• /
• v.8 no.5
• /
• pp.423-438
• /
• 2008

This paper reports an experimental investigation of the behaviour of concrete-encased composite columns subjected to short-term axial load and biaxial bending. In the study, six square and four L-shaped cross section of both short and slender composite column specimens were constructed and tested to examine the load-deflection behaviour and to obtain load carrying capacities. The main variables in the tests were considered as eccentricity of applied axial load, concrete compressive strength, cross section, and slenderness effect. A theoretical procedure considering the nonlinear behaviour of the materials is proposed for determination of the behaviour of eccentrically loaded short and slender composite columns. Two approaches are taken into account to describe the flexural rigidity (EI) used in the analysis of slender composite columns. Observed failure mode and experimental and theoretical load-deflection behaviour of the specimens are presented in the paper. The composite column specimens and also some composite columns available in the literature have been analysed and found to be in good agreement with the test results.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1933-1935
• /
• 2005

In this investigation, the electrochemical behaviour of magnesium alloy anode was studied by using electrochemical methods and the performance of magnesium alloy anode was observed with dry and wet backfill under accelerated cathodic protection. This paper reports the data collected at the laboratory and field sites over one year exposure of magnesium anode under cathodic protection donditions.

• The Korean Journal of Physiology
• /
• v.1 no.2
• /
• pp.215-230
• /
• 1967

It has been suggested by Krag and Kountz (1950), Horvath et al. (1955) and Spurr et al. (1955) that the mechanism for prevention of heat loss is less efficient in the aged than in the young. In addition, they observed that peripheral vasoconstriction occurred more rapidly and more intensively in the aged people in response to the cold stimulus. Although it is not clear on the basis of these reports whether the Physical insulation of the aged people in cold would be different from the younger, it is evident that the vascular reactivity in response to cold seems to be altered in the aged people. Hence this investigation was undertaken to investigate the physical insulation of the aged people in a systemic manner by water immersion method which has been successfully applied to the Eskimos and Korean diving women by Rennie et al.

• Industrial Engineering and Management Systems
• /
• v.2 no.1
• /
• pp.45-54
• /
• 2003

Enterprise Resource Planning(ERP) systems offer pervasive business functionality the applications encompass virtually all aspects of the business. Understanding and managing this pervasiveness will result in a successful and productive business application platform. Because of this pervasiveness, implementations have ranged from great successes to complete failures. This article has two distinctive parts. The first proposes and discusses a systematic process based on consulting experiences of LG CNS (leading information system company in Korea) for ERP selection. Also, the second provides the key factors that are critical to the successful implementation of ERP. The second part reports the results of a study carried out to assess a number of different ERP implementations in different organizations. A case study method of investigation was used, and the experiences of five Korean manufacturing companies were documented. The critical factors in the adoption of ERP are identified as: learning from the experiences of others, appointment of a process innovator, establishment of committees and project teams, training and technical support for the users, and appropriate changes to the organizational structure and managerial responsibilities.

• Korean Journal of Veterinary Service
• /
• v.20 no.2
• /
• pp.183-189
• /
• 1997

This article reports a spontaneous thoracic teratoma in a laying hen (Deklb brown warren). In this case, a 40 days old hen was submitted for necropsy as part of an investigation into a flock problem suspected Marek's disease to Chonbuk Veterinary Service Laboratory in 1983. On the gross finding, mass was In the cranial subpulmonary cavity and attached to the vertebral column. It contained fully developed contour feathers. Histologically, feathers were arised from feather follicles complete with arrector plumi muscle, nerve, vessel and mucous gland composed with simple tall columnar epithelium. The outer surface of mass was lined by keratinized or nonkeratinized stratified squamous epithelium. It converted to pseudostratified ciliated columnar epithelium in some area. There were lymphocyte infiltration around gland tissue and eosinophilic intranuclear inclusion bodies in nonkeratinized epithelium. This thoracic teratoma was composed of ectodermal origin, squamous epithelium and nerve, and endodermal origin, mucous gland. This case in laying hen has never been reported in the literature in the world.

• The Journal of Korean Medical History
• /
• v.28 no.2
• /
• pp.15-22
• /
• 2015

Objectives : The each college of Korean medicine in Korea adopts diverse textbooks for the medical history class, resulting in educational contents variations. This proposal aimed for the standardization of educational contents. Methods : The transition of medical history curriculum will be attempted based on the understanding of paradigm change in modern education. The first step is investigation on the course credit and curriculum grade of medical history class presented in education status reports of all Korean medicine schools. The next step is study on the various methods about changes of medical history education base on the learning objectives of colleges of Korean medicine. Results : The researchers of medical history should make an agreement on modification of learning objectives of the curriculum, and then educational standardization must be achieved by publishing a medical history textbook in accordance with the modified learning objectives. Conclusions : The researchers of medical history must collaborate to standardize medical history education by developing and applying internet-based flipped learning model.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.860-873
• /
• 2017

The present article reports an analysis and investigation of a direct AC-AC quasi-resonant converter. A bidirectional power device, whose switching frequency is lower than the frequency of the current passing through the load, is used for its realization. The zero voltage switching mode is described when zero voltage on the power device is available by measuring it with the control system. The continuous current in the resonant inductance by switching the power device at zero voltage is considered, and it is characterized by two sub-modes. A mathematical analysis of the processes has been made and comparative results from the computer simulation and experimental study have been brought. The converter can be used in a wide areas of power electronics: induction heating, wireless power transfer, AC-DC converters, etc.

• Computers and Concrete
• /
• v.18 no.2
• /
• pp.215-233
• /
• 2016

Exterior beam-column joints are structural elements that ensure connection between beams and columns. The joint strength is generally assumed to be governed by the structural element of lowest load capacity (beam or column), however, the joint may be the weakest link. The joint shear behavior is still not well understood due to the influence of several variables, such as geometry of the connection, stress level in the column, concrete strength and longitudinal beam reinforcement. A parametrical study based only on experiments would be impracticable and not necessarily exposes the failure mechanisms. This paper reports on a set of numerical simulations conducted in DIANA$^{(R)}$ software for the investigation of the shear strength of exterior joints. The geometry of the joints and stress level on the column are the variables evaluated. Results have led to empirical expressions that provide the shear strength of unreinforced exterior beam-column joints.

• Journal of Ship and Ocean Technology
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2003

Stiffened plates are among the most popular structural elements for marine structures like ships or offshore platforms. Many researchers have performed and reported the results of structural tests on stiffened plates in the open literature. However, the behaviour of stiffened plates in post-ultimate regime has not been fully reported. This paper reports the results of twenty-one axial compression tests including the initial imperfections and material properties of the test models. In aiming to investigate the post-ultimate behaviour of stiffened panels, the axial shortenings were increased up to far beyond the ultimate state. The results obtained from these tests can be utilized in substantiating design formulae in predicting the post-ultimate behaviour of stiffened plates.