• ETRI Journal
• /
• 제27권3호
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.57-62
• /
• 2004

This paper deals with a waypoint trajectory following problem for the tilt-rotor UAV under development in Korea (TR-KUAV). In this problem, dynamic model inversion based on the linearized model and Sigma-Phi neural network with adaptive weight update are involved to realize the waypoint following algorithm for the vehicle in the helicopter flight mode (nacelle angle=0 deg). This algorithms consists of two main parts: outer-loop system as a command generator and inner-loop system as stabilizing controller. In this waypoint following problem, the position information in the inertial axis is given to the outer-loop system. From this information, Attitude Command/Attitude Hold logic in the longitudinal channel and Rate Command/Attitude Hold logic in the lateral channel are realized in the inner-loop part of the overall structure of the waypoint following algorithm. The nonlinear simulation based on the TR-KUAV is carried out to evaluate the stability and performance of the algorithm. From the numerical simulation results, the algorithm shows very good tracking performance of passing the waypoints given. Especially, it is observed that ACAH/RCAH logic in the inner-loop has the satisfactory performance due to adaptive neural network in spite of the model error coming from the linear model based inversion.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.459-462
• /
• 2002

We report viewing angle characteristics of the Ultra-FFS TFT-LCD. The FFS mode is known to exhibit both a wide viewing angle and high transmittance, owing to the approximated in-plane rotation of the LC director. Nevertheless, in the bright state, the device shows bluish and yellowish color parallel and perpendicular to the LC director at off-normal directions since the LC director rotates onl.v in one direction, and in addition, the grey scale inversion exists in large oblique viewing angle. However, the Ultra-FFS shows no grey scale inversion and no color shift in wide viewing angle range.

• Journal of information and communication convergence engineering
• /
• 제17권4호
• /
• pp.227-233
• /
• 2019

In long-haul optical communication system consisting of standard single-mode fiber spans and fiber amplifiers, such as the erbium-doped fiber amplifier, performance is deteriorated by signal distortion due to chromatic dispersion and nonlinearity of the fiber. A combination of dispersion management and optical phase conjugation is an effective technique to compensate for the distortion. In an optical link configured by this combination, a dispersion map mainly affects the compensation of the distorted optical signals. This paper proposes new dispersion maps configured by the decaying or expanding distribution of residual dispersion per span (RDPS) in a dispersion-managed link combined with a midway optical phase conjugator. The effect of the proposed dispersion maps on the compensation for distorted 24 channel × 40 Gbps wavelength-division multiplexed signals was assessed through numerical simulation. It was confirmed that all the proposed dispersion maps are most appropriate for the compensation and, furthermore, for the flexibility of link configuration than conventional links.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.59-67
• /
• 2018

The minimum power supply voltage of a typical bandgap current reference (BGCR) is limited by operating temperature and input common mode range (ICMR) of a feedback amplifier. A new BGCR using a bandgap voltage generator (BGVG) is proposed to minimize the effect of temperature, supply voltage, and process variation. The BGVG is designed with proportional to absolute temperature (PTAT) characteristic, and a feedback amplifier is designed with weak-inversion transistors for low voltage operation. It is verified with a $0.18-{\mu}m$ CMOS process with five corners for MOS transistors and three corners for BJTs. The proposed circuit is superior to other reported current references under temperature variation from $-40^{\circ}C$ to $120^{\circ}C$ and power supply variation from 1.2 V to 1.8 V. The total power consumption is $126{\mu}W$ under the conditions that the power supply voltage is 1.2 V, the output current is $10{\mu}A$, and the operating temperature is $20^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.53-54
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and grey scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.452-455
• /
• 2002

We demonstrate the wide-viewing characteristics of a twisted nematic liquid crystal display (LCD) with self-formed micro-domains through the topographical alignment and fringe field effects of dielectric surface gratings (DSG). The mutual optical compensation between micro-domains within each pixel eliminates the contrast inversion phenomenon of TN mode without complex surface treatments.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.420-424
• /
• 2014

본 논문에서는 접합을 가지지 않는 Junctionless transistor (JLT)의 두께에 따른 특성 차이 및 기존의 MOSFET과의 특성 비교를 EDISON 시뮬레이터를 통해 확인을 하였다. JLT의 두께가 얇아짐에 따라 On/off 비율 측면에서 소자의 특성이 향상됨을 확인 하였으며, 기존 Inversion mode의 MOSFET과 비교하여 단 채널 효과 측면에서도 향상된 특성을 확인 할 수 있었다.

• 한국지구과학회지
• /
• 제28권7호
• /
• pp.903-913
• /
• 2007

천부지반에서 레일리파의 군속도와 위상속도 분산곡선을 역산하여 S파 속도구조를 구하는 방법을 비교하였다. 위상속도를 구하기 위해서 ${\tau}-p$ stacking 방법을 이용하였고, 군속도를 구하기 위해서 두 가지 방법, multiple filtering technique(MFT) continuous wavelet transform(CWT) 방법을 사용하였다. 고차모드가 존재하는 경우, 위상속도에서 기본모드와 고차모드를 분리하기가 용이하지 않았고, 군속도에서는 continuous wavelet transform 방법이 multiple filtering technique보다 효과적이었다. S파 속도 역산 결과, 위상속도와 군속도의 기본 모드만 역산할 경우, 신뢰구간의 깊이가 아주 얕았다. Continuous wavelet transform으로 구한 기본 모드와 1차 모드를 동시 역산할 경우, 신뢰구간의 깊이가 2배 이상 증가함을 알 수 있었다. 이는 1차 모드의 에너지가 더 깊은 층을 통과함으로 깊은 층에 대한 5파 속도 정보를 지니고 있기 때문으로 보인다. 위의 방법을 서해안 동호항의 조간대에 적용하여, continuous wavelet transform으로 구한 군속도의 기본 모드와 1차 모드를 동시 역산하여 S파 속도구조를 구하고, 해당 지역의 시추조사 결과와 비교하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.83-88
• /
• 2005

The interface-states between the top silicon layer and buried oxide layer of nano-SOI substrate were developed. Also, the effects of thermal treatment processes on the interface-state distributions were investigated for the first time by using pseudo-MOSFETs. We found that the interface-state distributions were strongly influenced by the thermal treatment processes. The interface-states were generated by the rapid thermal annealing (RTA) process. Increasing the RTA temperature over $800^{\circ}C$, the interface-state density considerably increased. Especially, a peak of interface-states distribution that contributes a hump phenomenon of subthreshold curve in the inversion mode operation of pseudo-MOSFETs was observed at the conduction band side of the energy gap, hut it was not observed in the accumulation mode operation. On the other hand, the increased interface-state density by the RTA process was effectively reduced by the relatively low temperature annealing process in a conventional thermal annealing (CTA) process.