• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.319-336
• /
• 2024

Ultra-high-performance concrete (UHPC) has attracted increasing attention in prefabricated steel-concrete composite beams as achieving the onsite construction time savings and structural performance improvement. The inferior replacement and removal efficiency of conventional prefabricated steel-UHPC composite beams (PSUCBs) has thwarted its sustainable applications because of the widely used welded-connectors. Single embedded nut bolted shear connectors (SENBs) have recently introduced as an attempt to enhance demountability of PSUCBs. An in-depth exploration of the mechanical behavior of SENBs in UHPC is necessary to evidence feasibilities of corresponding PSUCBs. However, existing research has been limited to SENB arrangement impacts and lacked considerations on SENB geometric configuration counterparts. To this end, this paper performed twenty push-out tests and theoretical analyses on the shear performance and design recommendation of SENBs. Key test parameters comprised the diameter and grade of SENBs, degree and sequence of pretension, concrete casting method and connector type. Test results indicated that both diameters and grades of bolts exerted remarkable impacts on the SENB shear performance with respect to the shear and frictional responses. Also, there was limited influence of the bolt preload degrees on the shear capacity and ductility of SENBs, but non-negligible contributions to their corresponding frictional resistance and initial shear stiffness. Moreover, inverse pretension sequences or monolithic cast slabs presented slight improvements in the ultimate shear and slip capacity. Finally, design-oriented models with higher accuracy were introduced for predictions of the ultimate shear resistance and load-slip relationship of SENBs in PSUCBs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.85-91
• /
• 2009

Recently, the LCD has high market share in TV market. The use of motion images in portable devices like DMB, PMP and Cell Phone is growing rapidly. One of the technique of enhancing the LCD's characteristic which is the slow response time. But, the technique requires a lot of memory usage, because of the requirement of frame memory. In this paper, we propose a reduction method for the frame memory that is required for LCD overdrive. Proposed overdrive architecture based on modified DWT-Inverse DWT and Color Conversion. The proposed architecture has a considerable PSNR. At once, it uses 50% of frame memory size and reduces 15% of frame memory size compare with previous architecture. The design was implemented using Xilinx Vertex4 and had 2172 Slice except Memory.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.24-34
• /
• 2000

In this paper we propose a controller design method, called Quasi-LQG/$H_{\infty}$/LTR for nonlinear servo systems with hard nonlinearities such as Coulomb friction, dead-zone. Introducing the RIDF method to model Coulomb friction and dead-zone, the statistically linearized system is built. Then, we consider $H_{\infty}$ performance constraint for the optimization of statistically linearized systems, by replacing a covariance Lyapunov equation into a modified Riccati equation of which solution leads to an upper bound of the LQG performance. As a result, the nonlinear correction term is included in coupled Riccati equation, which is generally very difficult to thave a numerical solution. To solve this problem, we use the modified loop shaping technique and show some analytic proofs on LTR condition. Finally, the Quasi-LQG/$H_{\infty}$/LTR controller for a nonlinear system is synthesized by inverse random input describing function techniques (ITIDF). It is shown that the proposed design method has a better performance robustness to the hard nonlinearity than LQG/$H_{\infty}$/LTR method via simulations and experiments for the timing-belt driving servo system that contains the Coulomb friction and dead-zone.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2060-2069
• /
• 1997

Information processing using computer in generalized in the office automation. In spite of to be integrate and concise form of document through computer network, signature of document with hand have processed as ever. The security on document flow out severely unjust by reason of increment inverse function of computer. Because of revelation secret of enterprise result from unjust outflow, lots of loss of self-enterprise is occured. In this paper, we used efficiently document using the method, electronic approval system with encryption, for the resolving above problems. Also we persue maintenance of security for the important document and process document signature rapidly. Finally, we design and implementation of electronic approval system that take one's share of function between server and client using to be transformed Vernam's encryption technique in stored document.

• Journal of the Korean Society of Floral Art and Design
• /
• no.42
• /
• pp.133-144
• /
• 2020

Anthropomorphism is one of the commonly used appeal methods in the field of communication design. Almost all visual images that humans encounter are exposed to this anthropomorphism, and we are consciously or unconsciously utilizing or being used. In addition, anthropomorphism can be found in almost all cultures and arts rather than in a specific field of study. Therefore, in this paper, the personification is redefined based on the relationship formation structure based on the anthropomorphic cases observed in culture and art and the results of previous studies. In addition, the personification form is defined as two kinds of personification and inverse personification according to the subject of relationship formation based on the personification type and gesture list derived from the previous study on the personification technique. Through the application cases of anthropomorphic techniques, which are appealed across the design domain, the effective anthropomorphic application system was defined. The definition of anthropomorphic relationship formation and anthropomorphic application system provided a framework for anthropomorphic techniques that could lead to effective audience satisfaction in various media. In addition, through the personification application system that synchronizes the characteristics of the conceptual traits of the medium with the gesture list and the personification type classification, it was confirmed that a device for communicating with the owner can be provided with a powerful and effective personification technique.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.15-20
• /
• 2022

An improvement of computational resources with a large scale cluster service is available to the individual person, which has been limited to the original industry and research institute. Therefore, the application of powerful computational resources to the engineering design has been increased fast. In naval and marine industry, the application of Computational Fluid Dynamics, which requires a huge computational effort, to a design of ship and offshore structure has been increased. Floating bodies such as the ship or offshore structure is exposed to ocean waves, current and wind in the ocean, therefore the precise modelling of those environmental disturbances is important in Computational Fluid Dynamics. Especially, ocean waves has to be nonlinear rather than the linear model based on the superposition due to a nonlinear characteristics of Computational Fluid Dynamics. In the present study, a fast reconstruction technique is suggested and it is validated from a series of simulations by using the Computational Fluid Dynamics.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.2
• /
• pp.47-51
• /
• 2017

In this study, the optimization algorithm by inverse analysis that is the core of the adaptive management technique was adopted to update the soil engineering properties based on the ground response during the construction. Adaptive management technique is the framework wherein construction and design procedures are adjusted based on observations and measurements made as construction proceeds. To evaluate the performance of the adaptive management technique, the numerical simulation for the triaxial tests and the synthetic deep excavation were conducted with the Hardening Soil model. To effectively conduct the analysis, the effective parameters among the parameters employed in the model were selected based on the composite scaled sensitivity analysis. The results from the undrained triaxial tests performed with soft Chicago clays were used for the parameter calibration. The simulation for the synthetic deep excavation were conducted assuming that the soil engineering parameters obtained from the triaxial simulation represent the actual field condition. These values were used as the reference values. The observation for the synthetic deep excavation simulations was the horizontal displacement of the support wall that has the highest composite scaled sensitivity among the other possible observations. It was found that the horizontal displacement of the support wall with the various initial soil properties were converged to the reference displacement by using the adaptive management technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.675-686
• /
• 2005

In this paper, we propose an efficient face region detection technique for the content-based video summarization. To segment video, shot changes are detected from a video sequence and key frames are selected from the shots. We select one frame that has the least difference between neighboring frames in each shot. The proposed face detection algorithm detects face region from selected key frames. And then, we provide user with summarized frames included face region that has an important meaning in dramas or movies. Using Bayes classification rule and statistical characteristic of the skin pixels, face regions are detected in the frames. After skin detection, we adopt the projection method to segment an image(frame) into face region and non-face region. The segmented regions are candidates of the face object and they include many false detected regions. So, we design a classifier to minimize false lesion using CART. From SGLD matrices, we extract the textual feature values such as Inertial, Inverse Difference, and Correlation. As a result of our experiment, proposed face detection algorithm shows a good performance for the key frames with a complex and variant background. And our system provides key frames included the face region for user as video summarized information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2535-2540
• /
• 2010

In traditional Publish/Subscribe system, the first procedure to deliver event from publisher to subscriber is that publisher publishes publisher's event to broker. Next step is that broker checks simple binary notion of matching : an event either matches a subscription or it does not. Lastly, broker delivers the event matched with subscriptions to the corresponding subscribers. In this system, information delivery has been accomplished in one way only. However, current some applications require two way delivery between subscriber and publisher. Therefore, we initiate an extended Publish/Subscribe system that supports two way delivery. Extended Publish/Subscribe system requires additional functions of delivering subscription to publisher and especially deciding top-n subscriptions using priority because broker might has a number of subscriptions. In this paper, we propose two priority retrieval techniques based on SIF using IS-List with deciding priority among subscriptions and defining SIF(Specific Interval First). The performance measurements show that RSO(resulting set sorting) technique results in better performance in index creation time and ITS&IS(insertion time sorting and inverse search using stack) technique results in better performance in search time.

• The Journal of Information Systems
• /
• v.29 no.3
• /
• pp.237-251
• /
• 2020

Purpose The research was studied the hierarchical Hangul emotion index by organizing all the emotions which SNS users are thinking. As a preliminary study by the researcher, the English-based Plutchick (1980)'s emotional standard was reinterpreted in Korean, and a hashtag with implicit meaning on SNS was studied. To build a multidimensional emotion dictionary and classify three-dimensional emotions, an emotion seed was selected for the composition of seven emotion sets, and an emotion word dictionary was constructed by collecting SNS hashtags derived from each emotion seed. We also want to explore the priority of each Hangul emotion index. Design/methodology/approach In the process of transforming the matrix through the vector process of words constituting the sentence, weights were extracted using TF-IDF (Term Frequency Inverse Document Frequency), and the dimension reduction technique of the matrix in the emotion set was NMF (Nonnegative Matrix Factorization) algorithm. The emotional dimension was solved by using the characteristic value of the emotional word. The cosine distance algorithm was used to measure the distance between vectors by measuring the similarity of emotion words in the emotion set. Findings Customer needs analysis is a force to read changes in emotions, and Korean emotion word research is the customer's needs. In addition, the ranking of the emotion words within the emotion set will be a special criterion for reading the depth of the emotion. The sentiment index study of this research believes that by providing companies with effective information for emotional marketing, new business opportunities will be expanded and valued. In addition, if the emotion dictionary is eventually connected to the emotional DNA of the product, it will be possible to define the "emotional DNA", which is a set of emotions that the product should have.