• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.508-514
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi input and multi output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments..

• 한국소음진동공학회논문집
• /
• 제15권9호
• /
• pp.1037-1044
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi-input and multi-output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block-inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments.

• 한국통신학회논문지
• /
• 제18권10호
• /
• pp.1433-1443
• /
• 1993

DCT(Discrete Cosine Transform)/ IDCT(Inverse DCT)는 여러 DSP 분야와 영 강압축 시스템에서 널리 사용되는 부호화 방식으로서 압축 및 복원 시스템에서 가장 많은 처리시간을 요하는 부분이다. 그러므로 이 부분의 성능을 향상시킴으로써 전체 영상 압축시스템의 성능을 향상시킬수 있다. 본 논문에서는 이러한 DCT/IDCT연산을 효율적으로 수행하기 위하여 모듈생성기법을 이용하여 하드웨어로 구성하였다. 설계한 DCT/IDCT코어 프로세서는 부분합과 분산연산을 이용하여 비교적 적은 면적을 차지하며, 약간의 면적을 증가시킴으로써 DCT와 IDCT연산을 모두 수행한다. 또한 파이프라인 구조를 사용하여 고속으로 DCT/IDCT연산을 수행할 수 있으며, 적은 수의 반올림(rounding)단계를 거치므로 높은 정밀도로 연산을 수행한다. 그리고 모듈생성기법을 사용하여, 설계공정에 독립적이고 입력비트나 정밀도 둥을 간단한 매개변수의 조정으로 변환시킬 수 있도록 설계하였다. 또한 구현한 코어프로세서는 CCITT 권장안 H.261에 부합하는 정밀도로 연산을 수행한다.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.168-175
• /
• 2015

본 논문은 잔상효과를 이용해서 동영상 표출이 가능한 회전형 LED 전광판을 위한 FPGA 설계 기법을 제안한다. 제안된 기법은 역감마 보정과 오차 확산 방식을 이용한 데이터 보정 과정, 블록 인터리빙 과정, 데이터 시리얼 출력 과정 등의 3가지 과정으로 구성된다. 역감마 보정과 오차 확산 방식을 이용한 데이터 보정 과정은 영상 데이터를 선형 휘도 특성으로 변환하기 위한 역감마 보정과 역감마 보정에 의해 발생하는 저계조 휘도 감소 현상을 줄이기 위해 오차 확산 방식을 이용한 영상 데이터를 보정하는 단계이다. 영상 데이터 블록 인터리빙 과정은 가로열로 입력되는 프레임의 데이터를 입력순서에 맞추어 저장한 후, 세로열에 해당하는 데이터만을 읽어내는 단계이다. 데이터 시리얼 출력 과정은 고속으로 회전하는 LED Bar에 표출해야 할 데이터를 전송하기 위해서 회전 위치에 해당하는 병렬 데이터를 시리얼로 변환하여 LED Driver IC에 전송하는 단계이다. 제안된 FPGA 설계 기법의 정확성을 평가하기 위해서 FPGA는 Xilinx 사의 Spartan 6 계열의 XC6SLX45-FG484를 사용하였고 설계 툴은 ISE 14.5를 사용하였다. 역감마 및 오차확산 보정작업에 대한 정확한 동작, 블록 메모리 인터리빙 동작, 영상 데이터의 시리얼화 동작 등에 대하여 목표로 한 설정값과 시뮬레이션 결과값이 일치함을 확인 할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.199-202
• /
• 1997

In this paper, a novel disturbance observer is proposed in order to regulate the disturbance in motor systems. The proposed observer does not require the implementation of ideal derivative of the state since the inverse of the nominal model is not used in the design of the observer. The transfer gain from a disturbance to the output of the disturbance observer is one. So, there is no time-delay in the response due to the dynamics of the observer.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1670-1679
• /
• 1995

In this paper, an optimal variable structure controller with a multilayer neural inverse identifier is proposed. A multilayer neural network with error back propagation learning algorithm is used for construction the neural inverse identifier which is an observer of the external disturbances and the parameter variations of the system. The variable structure controller with the multilayer neural inverse identifier not only needs a small part of a priori knowledge of the bounds of external disturbances and parameter variations but also alleviates the chattering magnitude of the control input. Also, an optimal sliding line is designed by the optimal linear regulator technique and an integrator is introduced for solving the reaching phase problem. Computer simulation results show that the proposed approach gives the effective control results by reducing the chattering magnitude of control input.

• 소성∙가공
• /
• 제13권1호
• /
• pp.90-101
• /
• 2004

An inverse mosaic method has been proposed to generate an initial blank shape from the final product shape. Differently from the geometric mapping method, the method can handle triangular patches. However, the generated blank shape is strongly dependent on the order of determination of nodes. In order to compensate the dependency error smoothing technique has been also developed. Although the accuracy has been improved greatly compared with the geometrical mapping method, the method has limitation, due to the no incorporation of plasticity theory. Even though the accuracy of the radius vector method is already proved. the method requires initial guess to start the method. In order to compromise the limitation of the present method and the radius vector method, the method has been connected to the radius vector method. The efficiency of the present optimal blank design method has been verified with some chosen examples.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.724-727
• /
• 1999

The previous LQ-servo PI design methods have some serious design problems happened from the frequency matching of the maximum and minimum singular values of loop transfer function at both low and high frequency regions on the Bode plot. To solve these problems, this paper proposes a new design technique based on the inverse-optimal control and convex optimization.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1470-1478
• /
• 2000

Analysis of actuating forces and joint reaction forces are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an algorithm tha t calculates actuating forces(or torques) depending on the various driving types to produce a given system motion. The joint reaction forces(or torques) of multibody systems with closed-loops are analyzed in the Cartesian coordinate space using the inverse velocity transformation technique. Two numerical examples were carried out to verify the algorithm proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.636-639
• /
• 1997

In this paper, a dynamic control scheme is proposed which not only compensates for the lateral dynamics and longitudinal dynamics but also deal with the yaw motion dynamics. Using the dynamic control technique, adaptive and learning algorithm together, the proposed controller is not only robust to disturbance and parameter uncertainties but also can learn the inverse dynamics model in steady state. Based on the proposed dynamic control scheme, a dynamic vehicle simulator is contructed to design and test various control techniques for 4-wheel steering vehicles.