• Structural Engineering and Mechanics
• /
• 제41권2호
• /
• pp.285-297
• /
• 2012

An inverse approach is presented for calculating the flexibility coefficient of open-side cracks in the cross sectional of beams. The cracked cross section is treated as a massless rotational spring which connects two segments of the beam. Based on the Euler-Bernoulli beam theory, the differential equation governing the forced vibration of each segment of the beam is written. By using a mathematical manipulation the time dependent differential equations are transformed into the static substitutes. The crack characteristics are then introduced to the solution of the differential equations via the boundary conditions. By having the time history of transverse response of an arbitrary location along the beam, the flexibility coefficient of crack is calculated. The method is applied for some cracked beams with solid rectangular cross sections and the results obtained are compared with the available data in literature. The comparison indicates that the predictions of the proposed method are in good agreement with the reported data. The procedure is quite general so as to it can be applicable for both single-side crack and double-side crack analogously. Hence, it is also applied for some test beams with double-side cracks.

• 한국항행학회논문지
• /
• 제14권3호
• /
• pp.446-451
• /
• 2010

본 논문은 H.264에서 모드 결정을 위한 간소화된 왜곡치 예측 방법을 소개하였다. 왜곡치 계산은 양자화된 변환 계수와 역양자화된 변환 계수의 차이로 계산되는데, 일반적으로 이 과정은 DCT 변환, 양자화, 역양자화 및 역 DCT 변환이 수행되어져야 한다. 제안하는 방식에서는 왜곡치를 계산하기 위하여 일련의 간소화된 수식을 사용함으로써 역양자화 및 역 DCT 과정을 생략하였다. 실험결과, PSNR은 거의 일치하면서도, RDO 모드 결정 시간은 기존의 방식보다 8~15 %의 감소를 보였다.

• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.150-158
• /
• 2003

라인 소스에 의한 빔 패턴 합성 문제에서 소스 분포함수와 빔 패턴간의 관계는 푸리에 변환쌍으로 표현 될 수 있다. 본 연구에서는 원하는 lobe형 빔 패턴을 만족시키는 라인 소스 분포함수를 반복 샘플링을 통한 비선형 역변환법을 사용하여 합성하는 일반적인 방법을 제안한다. 이 방법은 유전 매질에 TE 및 TM 평면파 입사시 원하는 역산란 반사계수를 갖도록 하는 연속적으로 분포된 유전율 합성에 적용될 수 있으며, 임의 반사계수를 갖는 전송선로 합성에도 적용될 수 있는 장점을 가진다. 대역저지 공간 필터 및 분산 특성을 갖는 전송선로 필터에 적용, 분석하므로서 제안한 방법의 타당성을 보인다.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.562-567
• /
• 2010

A One-Dimensional Water Flow and Contaminant Transport in Unsaturated Zone (FTUNS) code has been developed in order to interpret radionuclide migration in an unsaturated zone. The pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) for an unsaturated zone were measured by KS M ISO 11275 method. The hydraulic parameters of the unsaturated soil are investigated by using soil from around a nuclear facility in Korea. The effect of hydraulic parameters on radionuclide migration in an unsaturated zone has been analyzed. The higher the value of the n-factor, the more the cobalt concentration was condensed. The larger the value of $\alpha$-factor, the faster the migration of cobalt was and the more aggregative the cobalt concentration was. Also, it was found that an effect on contaminant migration due to the pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) was minute. Meanwhile, migrations of cobalt and cesium are in inverse proportion to the Freundich isotherm coefficient. That is to say, the migration velocity of cobalt was about 8.35 times that of cesium. It was conclusively demonstrated that the Freundich isotherm coefficient was the most important factor for contaminant migration.

• 대한조선학회논문집
• /
• 제39권4호
• /
• pp.17-23
• /
• 2002

2차원 익렬 익형의 표면에 목적하는 압력계수 분포를 설정하고 그 압력계수의 분포에 해당하는 형상을 설계하기 위해 임의의 초기형상으로부터 목적 형상에 근접해가도록 최적화 기법을 도입하여 역설계를 수행하였다. 목적함수인 표면압력계수를 구하기 위해 비직교 일반좌표계상의 2차원 비압축성 나비어-스톡스 방정식을 사용하였으며 목적함수의 감소를 위해서는 최속강하법과 공액 경사도 방법을 사용하였다. 해의 탐색방향을 위해 1차 정확도의 유한 차분화를 행하였고, 해의 탐색거리를 위해 황금분할법을 사용하였다. 본 연구의 결과, 목적한 형상으로의 수렴성이 뛰어남을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1139-1146
• /
• 2001

일차원 매질에 대한 역산란법을 이용하여 테이퍼형 임피던스 정합선로를 설계한다. 역산란법으로 유전율 분포를 추정하는 과정에서 오타를 줄이기 위하여 위상 보정인자(PCF: Phase Compensation Factor)를 도입한다. 설계하고자 하는 정합선로와 동일한 반사특성을 갖는 가상(virtual) 일차원 유전체의 유전율 분포를 추정하여 정합선로를 합성한다. 이 설계법은 등가회로에 대한 회로망 이론을 적용하지 않고 임의의 대역 특성을 갖는 정합선로를 설계할 수 있다. 주파수 영역의 반사계수를 사용함으로써 시간 영역의 반사계수를 사용하는 설계법에서 필연적으로 나타나는 오차를 피할 수 있다.

• 한국주조공학회지
• /
• 제24권5호
• /
• pp.281-289
• /
• 2004

The present study focused on the estimation of the interfacial heat transfer coefficient as a function of the surface temperature of the aluminum casting at the mold/casting interface to investigate the effects of superheat and coating layer. The casting experiments of aluminum into a cylindrical copper mold were systematically conducted to obtain the thermal history during solidification. The thermal history recorded by four thermocouples embedded both in the mold and the casting was used to solve the inverse heat conduction problem using Beck's method. The effects of superheat and coating on the interfacial heat transfer coefficient in the liquid state, during the solidification, and in the solid state were comparatively discussed. In the liquid state, the interfacial heat transfer coefficient is thought to be affected by the roughness of the mold, the wettability of the casting on the mold surface, and the thermophysical properties of the coating layer. When the solidification begins, the air gap forms between the casting and the mold, and the interfacial heat transfer coefficient becomes a function of the air gap as well as surface roughness and the superheat. In the solid phase, it depends only upon the thermal conductivity and the thickness of the air gap. The coating layer reduces seriously the interfacial heat transfer coefficient in the liquid state and during the solidification.

• 소성∙가공
• /
• 제12권4호
• /
• pp.370-375
• /
• 2003

Determination of the interface heat transfer coefficient was investigated in non-isothermal bulk forming of glass-coated Ti-6Al-4V. FE analysis and experiments were conducted. Equipment consisting of AISI Hl3 die was instrumented with thermocouples located at sub-surface of the bottom die. Die temperature changes were investigated in related to the process variables such as reduction, lubricant and initial die temperature. The calibration approach based on heat conduction and FE analysis using an inverse algorithm were used to evaluate the interface heat transfer between graphite-lubricated die and glass-coated workpiece. The coefficients determined were affected mainly by the contact pressure. The validation of the coefficients was made by the comparison between experimental data and FE analysis results.

• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.120-126
• /
• 2004

This study proposed the analysis of mass position detection due to the change of the mass and strifeless of structure by using the original and modified dynamic characteristics. The method is applied to examples of the cantilevers beam and the 3 degrees of freedom system by modifying the mass. The predicted detection of the mass positions and magnitudes are in good agrement with the present study from the structural reanalysis using the modified mass.

• 대한수학회논문집
• /
• 제13권4호
• /
• pp.875-888
• /
• 1998

The use of the zeros of Chebyshev polynomial of the first kind $T_{4n＋4(x}$ ) and second kind $U_{2n＋1}$ (x) for Gauss-Chebyshev quad-rature and collocation of singular integral equations of Cauchy type yields computationally accurate solutions over other combinations of $T_{n}$ /(x) and $U_{m}$(x) as in [8]. We show that the coefficient matrix of the overdetermined system has the generalized inverse. We estimate the residual error using the norm of the generalized inverse.e.