• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.32-36
• /
• 2021

This study was investigated in carbon diffusion behavior of laser-carburized TiZrN coating layer and the changes of mechanical properties. The carbon paste was deposited on TiZrN coatings, and the laser was irradiated to carburize into the coatings. The XRD peak corresponding to the (111) plane shifted to a lower angle after the carburization, showing the lattice expansion by doped carbon. The decreased grain size implied the compression by the grain boundary diffusion of carbon. The XPS spectra for the bonding states of carbon was analyzed that carbon was substitute to nitrogen atoms in TiZrN, as carbide, through the thermal energy of laser. In addition, the combination of sp2 and sp3 hybridized bonds represented the formation of an amorphous carbon. The cross-sectional TEM image and the inverse FFT of the TiZrN coating after carburizing were observed as the wavy shape, confirming the amorphous phase located in grain boundaries. After the carburization, the hardness increased from 34.57 GPa to 38.24 GPa, and the friction coefficient decreased by 83 %. In particular, the ratio of hardness and elastic modulus (H/E) which is used as an index of the elastic recovery, increased from 0.11 to 0.15 and the wear rate improved by 65 %.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.118-125
• /
• 2014

An approximation of speed of sound in the measurement plane is essential for the inverse estimation of temperature. To this end, an inverse problem relating the measured retarded time data in between set of sensors and actuators array located on the wall is formulated. The involved transfer matrix and its coefficient vectors approximate speed of sound of the measurement plane by using the radial basis function with finite number of interpolation points deployed inside the target field. Then, the temperature field can be reconstructed by using spatial interpolation technique, which can achieve high spatial resolution with proper number of interpolation points. A large number of retarded time data of acoustic paths in between sensors and arrays are needed to obtain accurate reconstruction result. However, the shortage of interpolation points due to practical limitations can cause the decrease of spatial resolution and deterioration of the reconstruction result. In this works, a regeneration for obtaining the additional retarded time data for an arbitrary acoustic path is suggested to overcome the shortage of interpolation points. By applying the regeneration technique, many interpolation points can be deployed inside the field by increasing the number of retarded time data. As a simulation example, two rectangular duct sections having arbitrary temperature distribution are reconstructed by two different data set: measured data only, combination of measured and regenerated data. The result shows a decrease in reconstruction error by 15 % by combining the original and regenerated retarded time data.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.323-329
• /
• 2002

This paper proposes a frame reliability weighting method to compensate for a time-selective noise that occurs at random positions of speech signal contaminating certain parts of the speech signal. Speech frames have different degrees of reliability and the reliability is proportional to SNR (signal-to noise ratio). While it is feasible to estimate frame Sl? by using the noise information from non-speech interval under a stationary noisy situation, it is difficult to obtain noise spectrum for a time-selective noise. Therefore, we used statistical models of clean speech for the estimation of the frame reliability. The proposed MFR (model-based frame reliability) approximates frame SNR values using filterbank energy vectors that are obtained by the inverse transformation of input MFCC (mal-frequency cepstral coefficient) vectors and mean vectors of a reference model. Experiments on various burnt noises revealed that the proposed method could represent the frame reliability effectively. We could improve the recognition performance by using MFR values as weighting factors at the likelihood calculation step.

• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.783-793
• /
• 2008

The purpose of this study is to analyze the sensitivity of the RMA2 model parameters reflecting the flow characteristics of stream junction and thus understand the hydraulic characteristics of the channel confluence flow. This study dealt with the input parameters of the RMA-2 model, a two-dimensional numerical analysis model widely used for researches both at home and abroad. The parameters of the RMA-2 model are roughness coefficient, turbulent diffusion coefficient, Coriolis forces latitude, Density, and mesh size. This study those parameters estimated from actual heavy rainfall, and varied the parameter size by (-)30%${\sim}$+30% to review the characteristics of the flow characteristics of the channel section. Weobserved that when the ratio of the channel width was relatively small, the smaller the approaching angle was, the farther from the junctions became the generating place of the maximum flow velocity, however, when the ratio of the channel width was relatively large, the larger the approaching angle was, the farther the generating place of the maximum flow velocity from the junctions became. In particular, the distance between junctions and the place where the maximum flow velocity generated showed an absolute correlationover 90% of the relative channel width, but an inverse relationwas found when the distance to the place where the flow velocity generated was shortened as relative the channel width between the main channel and tributary increased.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6425-6428
• /
• 2014

Background: Prostatic adenocarcinoma is one of the main causes of cancer death, and its timely diagnosis and preventing its progression dramatically helps improve life indexes. Given the high disease recurrence rate, today, research is more inclined toward exploring causes of recurrence and development, and innovation of modern treatment methods. Several studies have explored over-expression of human epidermal growth factor receptor 2 (HER-2/neu) in prostatic cancer so far, with different results. Thus, it was decided to investigate HER-2/neu overexpression in patients with prostatic adenocarcinoma in Iran. Materials and Methods: A sample size of 40 patients with prostate cancer entered the study, using a cross-sectional, non-randomized sampling method. Parameters studied included patient age at surgery, Gleason score, serum prostatic specific antigen (PSA) before surgery, and positive sample rate after immunohistochemical staining to investigate HER-2/neu overexpression. Results: In terms of HER-2/neu receptor staining rate, of 40 slides, 16 (40%) scored 0, 13 (32.5%) 1+, 7 (17.5%) 2+, and 4 (10%) 3+. In total 27.5% of slides showed HER-2/neu overexpression. In terms of age, an inverse correlation was found (-0.181), but without significance (p=0.263). In terms of serum PSA, the correlation coefficient was 0.449 (p=0.004). With respect to Gleason score, the coefficient was 0.190 (p=0.240). Conclusions: In this study, HER-2/neu overexpression occurred in 27.5% of prostate cancer cases, which is a relatively high figure, compared to similar studies elsewhere. While, we failed to reveal any relationship between HER-2/neu expression status with progression and prognosis of disease, it was demonstrated that the serum PSA level was significantly higher in cases with increased receptor expression.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.221-227
• /
• 2010

Aerosol size distribution provides good information for predicting weather changes and understanding cloud formation. Aerosol extinction coefficient and backscattering coefficient are measured by many scientists, but these parameters depend not only on aerosol size but on aerosol concentrations. An algorithm has been developed to measure aerosol parameters such as ${\AA}$ngstr$\ddot{o}$m exponent, color ratio, and LIDAR ratio without any assumptions by using two wavelength rotational Raman LIDAR signals. These parameters are good indicators for the aerosol size. And we can find ${\AA}$ngstr$\ddot{o}$m exponent, color ratio, and LIDAR ratio under various weather conditions. Finally, it can be seen that the ${\AA}$ngstr$\ddot{o}$m exponent has an inverse relationship to the particle size of the aerosol and the color ratio is linearly dependent on the aerosol size. An ${\AA}$ngstr$\ddot{o}$m exponent from 1.2 to 3.1, a color ratio from 0.28 to 1.04, and a LIDAR ratio 66.9 sr at 355 nm and 32.6 sr at 532 nm near the cloud were obtained.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.3 s.345
• /
• pp.48-58
• /
• 2006

This paper presents 8x8 two dimensional DCT/IDCT processor of adder-based distributed arithmetic architecture without applying ROM units in conventional memories. To reduce hardware cost in the coefficient matrix of DCT and IDCT, an odd part of the coefficient matrix was shared. The proposed architecture uses only 29 adders to compute coefficient operation in the 2-D DCT/IDCT processor, while 1-D DCT processor consists of 18 adders to compute coefficient operation. This architecture reduced 48.6% more than the number of adders in 8x8 1-D DCT NEDA architecture. Also, this paper proposed a form of new transpose network which is different from the conventional transpose memory block. The proposed transpose network block uses 64 registers with reduction of 18% more than the number of transistors in conventional memory architecture. Also, to improve throughput, eight input data receive eight pixels in every clock cycle and accordingly eight pixels are produced at the outputs.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.449-463
• /
• 2013

This study proposes the method for determining the Muskingum channel routing model parameters based on the assumption of linear system. The proposed method was applied to the Chungju dam basin for the evaluation. Additionally, the rainfall-runoff was repeated for the Yeongchun-Chungju dam reach using seven rainfall events observed. Summarizing the results is as follows. First, the concentration time and storage coefficient of a channel reach formed by the subdivision can be expressed as the difference between the concentration times and storage coefficients of upstream and downstream basins. The storage coefficients of the channel reach estimated is equal to the storage coefficient of the Muskingum channel routing model and the weight factor can be simply estimated using the ratio between the concentration time and storage coefficient. Second, the weight factor of the Muskingum model is in inverse proportion to the Russel coefficient, which is in between 0.4166 and 0.625 when considering the Russel coefficients generally applied. Finally the application to the Yeongchun-Chungju dam reach showed that the proposed method is still valid regardless of the limitations such as the uncertainty of the observed data.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.366-373
• /
• 2021

This study attempted to establish a field data-based write analysis standard by analyzing field observation data, which is non-linear data of southern garlic. Five regions, including Goheung, Namhae, Sinan, Changnyeong, and Haenam, were selected for analysis. Observation values for each observation station were extracted from the temperature data of farmland in the region through inverse distance weighted. Southern-type garlic production and temperature data were collected for 10 years, from 2010 to 2019. Local regression analysis (Kernel) of the obtained data was performed, and growth temperatures were analyzed, such as 0.8 (18.781℃), 0.9 (18.930℃), 1.0 (19.542℃), 1.1 (20.165℃), and 1.2 (21.042℃) depending on the bandwidth. The analyzed optimum temperature and the grown temperature (4℃/25℃) were applied to extract the growth temperature for each temperature by using the temperature response model analysis. Regression analysis and correlation analysis were performed between the analyzed growth temperature and production data. The coefficient of determination(R²) was analyzed as 0.325 to 0.438, and in the correlation analysis, the correlation coefficient of 0.57 to 0.66 was analyzed at the significance probability 0.001 level. Overall, as the bandwidth increased, the coefficient of determination was higher. However, in all analyses except bandwidth 1.0, it was analyzed that all variables were not used due to bias. The purpose of this study is to accommodate all data through non-linear data. It was analyzed that bandwidth 1.0 with a high coefficient of determination while accepting modeling as a whole is the most suitable.