• Journal of the Ergonomics Society of Korea
• /
• v.9 no.1
• /
• pp.3-14
• /
• 1990

This article develops a cost-effective and accurate measurement system for heart best intervals. The system is composed of an analog to digital (A/D) converter, an IBM personal computer (an 8088 microprocessor, an 8253-5 timer, an 8259A interrupt controller, and memories) and assembler programs for controlling these hardware components. An exponential smoothing algorithm effectively reduced noise effects from A/D converted electrocardiogram (ECG) signals influenced by 60 Hz alternating current (AC). The system can collect 15000 heart beat intervals with an 1/5400 second unit.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.640-646
• /
• 2001

The torsional vibration monitoring system(TVM) for large diesel engines was developed and applied by manufacturers of torsional vibration damper, flexible coupling and diesel engine since 1990s. And demands of TVM have been steadily increased to operate safely engine and to extend maintenance interval of damper and flexible coupling. In this paper, the experimental methods and algorithms of TVM development which used the existing PC, turning wheel and speed sensors in ship are introduced.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.5
• /
• pp.481-487
• /
• 2013

This paper presents an FIR (Finite Impulse Response) fixed-interval smoothing filter for fast and exact estimating state variables of a discrete nonlinear system with modeling uncertainty. Conventional IIR (Infinite Impulse Response) filter and smoothing filter can estimate state variables of a system with an exact model when the system is observable. When there is an uncertainty in the system model, however, conventional IIR filter and smoothing filter may cause large errors because the filters cannot estimate the state variables corresponding to the uncertain model exactly. To solve this problem, FIR filters that have fast estimation properties and have robustness to the modeling uncertainty have been developed. However, there is time-delay estimation phenomenon in the FIR filter. The FIR smoothing filter proposed in this paper makes up for the drawbacks of the IIR filter, IIR smoothing filter, and FIR filter. Therefore, the FIR smoothing filter has good estimation performance irrespective of modeling uncertainty. The proposed FIR smoothing filter is applied to the integrated navigation system composed of a magnetic compass based DR (Dead Reckoning) and a GPS (Global Positioning System) receiver. Even when the magnetic compass error that changes largely as the surrounding magnetic field is modeled as a random constant, it is shown that the FIR smoothing filter can estimate the varying magnetic compass error fast and exactly with simulation results.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2015

Electrical door system is one of the most essential items for the successful commercial operation of the railway vehicles. Nowadays, reliability values of electrical door system have a tendency to be included in technical requirements for design and manufacturing of rolling stocks. Manufacturer shall meet the reliability target values of electrical door system which is proposed by railway operator in procurement contract book. Railway operator shall approve the supplier's the reliability target values based on maintenance operation data. Railway operators are in the transition stage from the framework of maintenance interval based on time to the framework of maintenance interval based on distance. In this study, failure rates of the electrical door system currently used in railway vehicles are collected from maintenance field data. Failure rates are analyzed by using Minitab. Several kinds of plan for improving reliability are also suggested. It is necessary to keep studying on reliability prediction methodology, applying it in the field and implementing on improvement of reliability through feedback as well. Further, it will be useful for determining new maintenance policies or changing maintenance intervals for existing railway vehicles.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.679-685
• /
• 2011

This paper presents an algorithm identifying devices that generate observed mixed signals that are collected at main power-supply line. The proposed algorithm, which is necessary for low cost electric power monitoring system at appliance-level, that is non-intrusive load monitoring system, divides incoming mixed signal into multiple time intervals, calculating difference-signals between consecutive time interval, and identifies which device is operating at the time interval by analysing the difference-signals. Since the features of one device can remain when the time interval is short enough and the features are independent and additive, well-known classification algorithms can be used to classify the difference-signals with features of N individual devices, otherwise $2^N$ features might be necessary. The proposed algorithm was verified using data mixed in a laboratory with individual devices's data collected from field. When maximum 4 devices operate or stop sequentially and when features satisfy the requirements of proposed algorithm, the proposed algorithm resulted nearly 100% success rate under the constrained test condition. In order to apply the proposed algorithm in real world, the number devices shall increase, the time interval shall be smaller and the pattern of mixture shall be more diverse. However we can expect, if features used follow guidelines of proposed algorithm, future system could have certain level of performance without the guideline.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.417-425
• /
• 2007

While the cyclic prefix lengths of downlink OFDMA(Orthogonal Frequency Division Multiple Access) systems are determined based on the maximum delay spreads encountered in cellular environments, the guard interval of uplink OFDMA systems should consider the timing offsets of uplink signals as well as the delay spread lengths. Especially in the cases of initial accesses, handovers, and considerable time elapsed without data transmissions between base and mobile stations in a large cell, uplink timing offsets can be large and a very long guard interval length may be required. In order to keep the small size of the cyclic prefix in uplink OFDMA systems, the systems require a method of extending the guard intervals for users with large timing offsets without affecting the cyclic prefix length of the system. This paper proposes a method extending the guard intervals of individual users in uplink OFDMA systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.1010-1016
• /
• 2000

Effect on the bio-mass and nutrient yield of Lemna perpusilla Torry was studied at two nutrient loading frequencies. Six polythene sinks ($6{\times}2{\times}0.5m^{3}$ area) randomly allocated to two treatments having three sinks in each treatment. Each sink containing $6{\times}2{\times}0.35m^{3}$ water body, was changed either daily with 12.6 kg anaerobically fermented cattle manure (effluent) or with 76 kg efluent at six-day interval. Media Kjeldhal-N (40 vs. 36 mg/L; p>0.05) and $NH_3$-N (9 vs 7 mg/L; p<0.05) concentration were higher in daily charged sinks than those charged at six-day interval. However, temperature ($28.48{^{\circ}C}\;vs.\;28.60{^{\circ}C}$) and pH (6.82 vs. 6.84) were sinilar in both groups of sinks. Biomass (93 vs. $80g/m^{2}/d$) and crude protein (1.24 vs. $1.11g/m^{2}/d$) yield were non-significantly (p>0.05) higher in the daily charged than 6-d interval charged ponds. However, dry matter (4.52 vs. 4.15%), organic matter (83 vs. 84%), crude protein (31.4 va. 29.6%) and organic carbon (47 vs. 47%) content were similar in both daily and 6-d interval charged ponds. There were no apparent relationships between the crude protein content of Lemna and the media Kjeldhal-N or $NH_3$-N concentration apparently due to saturated level of nutrient (N in particular). It was concluded that with the level of effluent used for two treatments, nutrient-loading frequency had no significant effect on the biomass and protein yield of Lemna. Technique described here can be used for year-round duckweed production from fermented cattle manure for feeding poultry/fish in smallholder production system.

• Human Ecology Research
• /
• v.53 no.1
• /
• pp.49-66
• /
• 2015

This study analyzes the effects of women's labour force participation and work-family reconciliation support on life-cycle fertility in Korea. The analysis is based on the longitudinal data from Korean Labour and Income Panel Study (KLIPS), which include the available information on life-cycle fertility and employment history. Employing a dynamic model of fertility, we estimated the life-cycle fertility of all the 15-49 years old women considered in this study by using a duration model. The major results of this study were as follows: First, women's labour force participation had a negative effect on the first birth, second birth, and all births (transition to births starting at different parities). Women's employment tended to lengthen the interval between births. Second, the availability of maternal leave had a positive effect on the first birth and all births for working women. Providing maternal leave to working women decreased the opportunity cost of childbearing and in turn, reduced the interbirth interval of women. However, the availability of parental leave had no significant effect on the births of working women. Third, the financial support for childcare had a positive effect on the first birth and all births. The economic support for childcare led to the reduction in the interbirth interval of women by increasing the probability of births. The use of a childcare center for the first child, which substitutes for the time that women needed to take care of their children, classified as time-intensive consumption goods, did not have any effect on the second birth. Fourth, the part-time employment of women had a positive effect on the second birth. A flexible working time schedule tended to decrease the interval between the first and the second births.

• The Research Journal of the Costume Culture
• /
• v.18 no.1
• /
• pp.13-28
• /
• 2010

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern and marker orientation using woman's Jacket and Slacks. Research Method intended to compare the marking efficiency of Jacket and Slacks, check-less and check- patterned materials with the intervals of $1.5{\times}1.5cm$ and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on check-pattern interval, regardless of the direction of marker position, single-item makers and set-item makers, the efficiency of check-less materials was higher than those of check-patterned materials and increasing the intervals decreased marking efficiency and vice versa. Marking efficiency of Slacks was less influenced than marking efficiency of Jacket by check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and number of maker pieces, the efficiency of nap-up-and-down position was higher than those of nap-one-way position. Third, the marking efficiency of single-item was more effective than one of set-item in all working condition except nap-one-way position in checkless materials.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.2
• /
• pp.130-136
• /
• 2007

Objectives : Recent educational efforts have concentrated on patient's early hospital arrival after symptom onset. The purpose of this study was to evaluate the time interval between symptom onset and hospital arrival and to investigate its relation with clinical outcomes for patients with acute ischemic stroke. Methods : A prospective registry of patients with signs or symptoms of acute ischemic stroke, admitted to the OO Medical Center through emergency room, was established from September 2003 to December 2004. The interval between symptom onset and hospital arrival was recorded for each eligible patient and analyzed together with clinical characteristics, medication type, severity of neurologic deficits, and functional outcomes. Results : Based on the data of 256 patients, the median interval between symptom onset and hospital arrival was 13 hours, and 22% of patients were admitted to the hospital within 3 hours after symptom onset. Patients of not-mild initial severity and functional status showed significant differences between arrival hours of 0-3 and later than 3 in terms of their functional outcomes on discharge. Logistic regression models also showed that arrival within 3 hours was a significant factor influencing functional outcome (OR=5.6; 95% CI=2.1, 15.0), in addition to patient's initial severity, old age, cardioembolism subtype, and referral to another hospital. Conclusions : The time interval between symptom onset and hospital arrival significantly influenced treatment outcome for patients with acute ischemic stroke, even after controlling for other significant clinical characteristics. The findings provided initiatives for early hospital arrival of patients and improvement of emergency medical system.