• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.457-464
• /
• 2005

In this paper a 3D memory system that allows 17 access types at an arbitrary position is introduced. The proposed memory system is based on two main functions: memory module assignment function and address assignment function. Based on them, the memory system supports 17 access types: 13 Lines, 3 Rectangles, and 1 Hexahedron. That is, the memory system allows simultaneous access to multiple data in any access types at an arbitrary position with a constant interval. In order to allow 17 access types the memory system consists of memory module selection circuitry, data routing circuitry for READ/WRITE, and address calculation/routing circuitry In the point of view of a developer and a programmer, the memory system proposed in this paper supports easy hardware extension according to the applications and both of them to deal with it as a logical three-dimensional away In addition, multiple data in various across types can be simultaneously accessed with a constant interval. Therefore, the memory system is suitable for building systems related to ,3D applications (e.g. volume rendering and volume clipping) and a frame buffer for multi-resolution.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.181-190
• /
• 2014

The underwater acoustic lens system is one of the systems getting high-resolution images on the seafloor by the beam forming method using acoustic lens. The beam forming using acoustic lenses reduces complexity and driving power. When receiving an incoming beam with the acoustic lens array, beam pattern analysis and arrangement problem of the array sensor must be addressed. Introducing SIR (Signal to Interference Ratio), the relationship among sensor interval, beam pattern and image quality would be analyzed. Generally if the sensor interval getting wider, the less effect of the side lobes makes SIR high. If the amplitude of a side lobe is high, SIR is generally getting low. The type of the apodization function changes the width, shape and amplitude of both main lobe and side lobes. Thus an appropriate apodization function can improve SIR. In this paper, SIR is stable at the sensor interval of 13mm with 0-10dB, which is not high relatively. By applying the Chebyshev function, the SIR becomes 80dB over the sensor interval of 37 mm or higher. The Hann and triangular functions demonstrate better SIR when the sensor interval becomes narrower.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.6
• /
• pp.465-475
• /
• 2020

Objectives: This study was conducted to examine the association between birth patterns (defined in terms of birth order and interval) with delayed breastfeeding initiation in Indonesia. Methods: A cross-sectional study was carried out using data from the Indonesian Demographic and Health Survey 2017. The weighted number of respondents was 5693 women aged 15-49 years whose youngest living child was less than 2 years old. Multivariable logistic regression was conducted to evaluate associations between birth patterns and delayed breastfeeding initiation after adjusting for other covariates. Results: This study found that 40.2% of newborns in Indonesia did not receive timely breastfeeding initiation. Birth patterns were significantly associated with delayed breastfeeding initiation. Firstborn children had 77% higher odds of experiencing delayed breastfeeding initiation (adjusted odds ratio, 1.77; 95% confidence interval, 1.02 to 3.04; p<0.05) than children with a birth order of 4 or higher and a birth interval ≤ 2 years after adjusting for other variables. Conclusions: Firstborn children had higher odds of experiencing delayed breastfeeding initiation. Steps to provide a robust support system for mothers, especially first-time mothers, such as sufficient access to breastfeeding information, support from family and healthcare providers, and national policy enforcement, will be effective strategies to ensure better practices regarding breastfeeding initiation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.507-513
• /
• 2006

Changes of in vitro true digestibility (IVTD) of Napiergrass (Pennisetum purpureum) were determined by a filter bag system, and their relationships to chemical composition, leaf to stem ratio, plant height, geographic location, climatic factors and harvest interval were studied and used to develop prediction models for the crude protein (CP), acid-detergent fiber (ADF), and neutral-detergent fiber (NDF) contents and IVTD. Partitioning the total variance of IVTD of Napiergrass showed that 80% was attributable to the effect of harvest interval. Days of growth, plant height, leaf/stem ratio, CP, ADF and NDF of Napiergrass had highly significant relationships (p<0.01) with IVTD. The highest coefficient of correlation between the ADF, NDF, and IVTD of Napiergrass and growth degree days was obtained when the base temperature was set at $0^{\circ}C$. Growth degree days could predict ADF, NDF, and IVTD of Napiergrass more accurately than plant height, and plant height is not suitable to predict IVTD.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.361-366
• /
• 2016

Although the permanent magnet linear synchronous motor is a motor useful for transportation systems thanks to its high speed, high acceleration and deceleration, the linear motor generally has armatures installed on the full length of the transport path. It results in the increase in material costs and manufacturing time. As a means to solve this problem a stationary discontinuous armature system is suggested. However, it involves the following two issues. The first issue is it is impossible to control the mover in the section where any armature is not installed as armatures are distributed. The second one is increasing cogging force due to the ends of the armatures. Therefore, this study aims to solve these problems by adjusting intervals between armatures to control the mover anywhere, and to design the interval between armatures optimally to minimize the end cogging force. The suitable distance was deduced. It addressed the problems and showed suitability for long distance transportation PMLSM.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.34-40
• /
• 2012

We have developed a highly sensitive inspection technique based on an electron beam inspection for detecting the contact failure of a poly-Si plugged layer. It was difficult to distinguish the contact failure from normal landing plugs with high impedance. Normally, the thermal annealing method has been used to decrease the impedance of poly-Si plugs and this method increases the difference of charged characteristics and voltage contrast. However, the additional process made the loss of time and broke down the device characteristics. Here, the interval scanning method without thermal annealing was effectively applied to enhance the difference of surface voltage between well-contacted poly-Si plugs and incomplete contact plugs. It is extremely useful to detect the contact failures of non-annealed plug contacts with high impedance.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.353-360
• /
• 2016

Tests of hydraulic rock splitting were conducted using double packer at the 1, 2 free surface in the limestone mining and granodiorite Suksan area, respectively. The method of hydraulic rock splitting was applying hydraulic power in the interval layer using double packer. As a result of tests, a crack occurred. At about 6.5 MPa and 13 MPa, a crack occurred in 2 free surface. Any crack did not occur in the 1 free surface. Rather, used 1 double packer was broken in the 1 free surface. Also, it was confirmed that the water pressure of the interval increased through the existing crack and the new crack in the test areas.

• Journal of Korea Multimedia Society
• /
• v.18 no.3
• /
• pp.312-322
• /
• 2015

In this paper a new defect detection method for flat panel display that does not require any separately prepared reference images and shows robustness against problems with regard to pixel tolerance and nonuniform illumination condition is proposed. In order to perform defect detection under any magnification value of camera, the proposed method automatically obtains the value of pattern interval through an image analysis. Using the information for pattern interval, an advanced PCSR-G method presented in this paper utilizes neighboring patterns as its reference images instead of utilizing any separately prepared reference images. Also this paper proposes a scheme to improve the performance of the conventional PCSR-G method by extracting and applying additional information for pixel tolerance and intensity distribution considering the value of pattern interval. Simulation results show that the performance of the proposed method utilizing pixel tolerance and intensity distribution is superior to that of the conventional method. Also, it is proved that the proposed method that is implemented using parallel technique based on GPGPU can be applied to real system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.6
• /
• pp.293-305
• /
• 2005

This paper describes an improved Prony method in its speed, accuracy and reliability by efficiently determining the optimal sampling interval with use of DFT (discrete Fourier transformation). In the Prony method the computation time is dominated by the size of the linear prediction matrix, which is given by the number of data times the modeling order The size of the matrix in a general Prony method becomes large because of large number of data and so does the computation time. It is found that the Prony method produces satisfactory results when SNR is greater than three. The maximum sampling interval resulting minimum computation time is determined using the fact that the spectrum in DFT is inversely proportional to sampling interval. Also the process of computing the modes is made efficient by applying Hessenberg method to the companion matrix with complex shift and computing selectively only the dominant modes of interest. The proposed method is tested against the 2003 KEPCO system and found to be efficient and reliable. The proposed method may play a key role in monitoring in real time low frequency oscillations of power systems .

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.916-926
• /
• 2003

The encryption of packets increases delay and delay jitter that may degrade the quality of service (QoS) in real-time communications. So, we analyzed the delay jitter, delay, and interval delay between consecutive packets which were encrypted by the DES, 3DES, SEED and AES algorithms in this study. The interval delay and jitter of three algorithms such as the DES, SEED, AES were similar to the results of no encryption. But in the case of 3DES, the encryption of packets increases the variance of interval delay and jitter in comparison with other algorithms. we also analyzed properties of security and an efficiency of RTP security between SRTP and H.235.