• Korea Journal of Hospital Management
• /
• v.24 no.3
• /
• pp.61-71
• /
• 2019

Purposes: The purpose of this study is to analyze nurses' perception on the clinical career ladder system which was introduced to enhance the nursing capabilities in general hospital. Methods: Research data has been collected for approximately 30 days since March 28, 2017 from 171 nurses who had been involved in the clinical career ladder system, 177 nurses who had not participated, and a total of 348. Finding: The study results showed that nurses' perception on the cost effectiveness of clinical career ladder system is significantly different depending on the sex, age, program experience, personal stage in the clinical career ladder system and the individual's health condition. In addition, the nurses' willingness to pay for the clinical career ladder system was significantly associated with their department and the needs for the system. With adjusted age, gender, position, education and marital status, nursing competency was 8.71(95% Confidence Interval; 4.79 to 12.63) in the presence of system experience, but the perception on clinical career ladder system was 4.34(95% Confidence Interval; -6.84 to -1.84). Practical Implications: Based on the study results, we expect that more hospitals introduce the clinical career ladder system and also use these study results as basic data for securing excellent nurses.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.449-458
• /
• 2007

Research results for the pressure drop variance depending on operation conditions such as change of inlet concentration, pulse interval, and face velocity, etc., in a pulse air jet-type bag filter show that while at $3kg/cm^2$ whose pulse pressure is low, it is good to make an pulse interval longer in order to form the first layer, it may not be applicable to industry because of a rapid increase in pressure. In addition, the change of inlet concentration contributes more to the increase of pressure drop than the pulse interval does. In order to reduce operation costs by minimizing filter drag of a filter bag at pulse pressure $5kg/cm^2$, the dust concentration should be minimized, and when the inlet dust loading is a lower concentration, the pulse interval in the operation should be less than 70 sec, but when inlet dust loading is a higher concentration, the pulse interval should be below 30 sec. In particular, in the case that inlet dust loading is a higher concentration, a high-pressure distribution is observed regardless of pulse pressure. This is because dust is accumulated continuously in the filter bag and makes it thicker as filtration time increases, and thus the pulse interval should be set to below 30 sec. If the equipment is operated at 1m/min of face velocity, while pressure drop is low, the bag filter becomes larger and thus, its economics are very low due to a large initial investment. Therefore, a face velocity of around 1.5 m/min is considered to be the optimal operation condition. At 1.5 m/min considered to be the most economical face velocity, if the pulse interval increases, since the amount of variation in filter drag is large, depending on the amount of inlet dust loading, the operation may be possible at a lower concentration when the pulse interval is 70 sec. However, for a higher concentration, either face velocity or pulse interval should be reduced.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.249-254
• /
• 2016

It is imperious to know the reproductive parameters of the subsisting swine breed for profitable farming in Bangladesh. This study was designed to compare the reproductive parameters of sows at hilly areas between the local and crossbred at farm and backyard level. A total of 116 breedable sows were included. The data on age at puberty, litter size, birth weight, weaning weight, gestation length, interval between farrowing and number of piglets born per sow in local and crossbred sows were determined and direct questionnaire method was used for data collection. The present study revealed that age at puberty between farm and backyard system of crossbred sows was $8.88{\pm}0.153$ and $9.85{\pm}0.221$ months, respectively. The farrowing interval was shorter in crossbred sows which were kept in farming system rather than backyard system. The interval between farrowing and onset of estrus was shorter in crossbred sows. The gestation length was almost similar between backyard and farm condition. The number of litter size per sow per farrowing was $8.45{\pm}0.41$ in crossbred and $7.17{\pm}0.250$ in local pigs at backyard system. The birth weight and weaning weight were more in farm conditions than backyard system. The age at puberty in local breed was lower than the crossbred and litter size was $8.45{\pm}0.407$ in crossbred which was higher than local breed $7.17{\pm}0.250$ in backyard system. These results suggest that reproductive parameters of local sow need to be improved for better production and crossbred sows should be reared for obtaining desired productivity.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.646-652
• /
• 2022

The dead-end anode (DEA) system is a method that closes the anode outlet and supplies fuel by pressure. The DEA method could improve fuel usage and power efficiency through system simplification. However, flooding occurs due to water and nitrogen back diffusion from the cathode to the anode during the DEA operation. Flooding is a cause of decreased fuel cell performance and electrode degradation. Therefore, tthe structure and components of polymer electrolyte membrane fuel cell (PEMFC) should be optimized to prevent anode flooding during DEA operation. In this study, the effect of a porous flow field with metal foam on fuel cell performance and fuel efficiency improvement was investigated in the DEA system. As a result, fuel cell performance and purge interval were improved by effective water management with a porous flow field at the cathode, and it was confirmed that cathode flow field structure affects water back-diffusion. On the other hand, the effect of the porous flow field at the anode on fuel cell performance was insignificant. Purge interval was affected by metal foam properties and shown stable performance with large cell size metal foam in the DEA system.

• Journal of the Korean Society of Radiology
• /
• v.8 no.5
• /
• pp.225-230
• /
• 2014

Assessments of medical image was improved in accordance with development of medical imaging systems. One of them is edge method to determining MTF(Modulation Transfer Function) based on the Fujita method. Fujita was reduced sampling interval used slightly angulated slit to the direction of pixel array and composited finely sampled LSF to determine presampling MTF. In this study, we investigate the effect of sampling interval on the MTF under a digital imaging system by changing wire angle. The wire method was equivalent to the slit method except signal appearance. A Simens's MAMMOMAT Inspiration with $0.085{\times}0.085mm^2$ pixel size made by amorphous selenium was used and 96% accuracy on MTF in twice sampling interval compared with Fujita was obtained. However, three times of sampling interval showed 93% accuracy on 50% of MTF and 85% accuracy on 10% of MTF.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.30
• /
• pp.101-106
• /
• 1994

The basic of the VSI charts is that if the sample statistic computed after a sample is taken shows some indication of a process change than the sampling interval before the next sample should be short otherwise long. This paper was shown the VSS chart can be considerably more efficient than the FSS chart and the effectiveness of VSI R chart with S chart used for monitoring a process standard deviation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.33
• /
• pp.143-151
• /
• 1995

In this design the sampling interval that each sampling time changes according to the valuse of the previous to sample statistics, sample mean and ranges. The VSI scheme uses large sample if the sample statistics appear near in side the control limits and smaller sample otherwise. The efficiency of the VSI scheme is compare to the FSI. It is shown that VSI control chart improves the confidence of the procedure and performens better than FSI control chart.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.145-152
• /
• 1999

Methods of discharging each graded agricultural product are divided into two according to the type of feeding. One is based on feeding objects using a series of specially designed holders mounted with an equal interval. The other is randomly feeding objects while being isolated without a specific interval. In this paper, a real time simultaneous discharge algorithm, which is good for objects randomly fed individually and for multi-objects located along a series of discharge buckets, was developed. And the developed algorithm was implemented to the controller and the performance was verified using the system developed for dried mushrooms. The discharge system used for the experiment was composed of a variable speed conveyor, a series of double channel bucket mounted along both sides of the conveyor, and a series of air nozzles and optic sensors. Developed algorithm worked perfectly and could be directly used for automatic discharge system for randomly feeding agricultural products.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.817-824
• /
• 1997

This paper is concerned with a parallel system that sustains a time-independent load and consists of n components with exponential lifetimes. It is assumed that the total load is shared by the functioning components and the failures of components induce higher failure rates in the surviving components according to the relationship between the load and the failure rates. The power rule model among several load-failure rate relationships is considered. Firstly, the reliability function is obtained. Secondly, the optimization problem in this load-sharing parallel system is considered. The optimal redundant units and inspection interval are obtained. Some numerical examples are studied.

• The Korean Journal of Applied Statistics
• /
• v.11 no.1
• /
• pp.53-64
• /
• 1998

Recently, it is of great interest among engineers and reliability scientists to consider a statistical model to describe the failure times of various types of repairable systems. The main subject we deal with in this paper is the power law process which is proved to be a useful model to describe the reliability growth of the repairable system. In particular, we derive the bootstrap confidence intervals of the mean time between two successive failures of a repairable system using the time truncated data. We also compare our bootstrap confindence intervals with Crow's (1982) confidence interval.