• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.769-775
• /
• 2019

The tensile strength of irradiated 3C-SiC, SiC with artificial point defects, SiC with symmetric tilt grain boundaries (GBs), irradiated SiC with GBs are investigated using molecular dynamics simulations at 300 K. For an irradiated SiC sample, the tensile strength decreases with the increase of irradiation dose. The Young's modulus decreases with the increase of irradiation dose which agrees well with experiment and simulation data. For artificial point defects, the designed point defects dramatically decrease the tensile strength of SiC at low concentration. Among the point defects studied in this work, the vacancies drop the strength the most seriously. SiC symmetric tilt GBs decrease the tensile strength of pure SiC. Under irradiated condition, the tensile strengths of all SiC samples with grain boundaries decrease and converge to certain value because the structures become amorphous and the grain boundaries disappear after high dose irradiation.

• Electronics and Telecommunications Trends
• /
• v.38 no.4
• /
• pp.58-69
• /
• 2023

Cyberspace is emerging as a critical domain requiring national-level governance and international cooperation owing to its potential financial and societal impacts. This research aims to investigate the cybersecurity policies from major countries for understanding with comprehensive perspectives. Global trends emphasize a comprehensive command-centered approach, with top leadership directing cybersecurity policies. Key policy areas include security across technology ecosystems, protection of critical infrastructure, and software supply chain security. Investment is being focused on zero-trust architectures, software bills, and new technologies like artificial intelligence. For countries like Korea, immediate response and adaptation to these trends are crucial to develop and enforce national cybersecurity policies.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.671-672
• /
• 2015

Due to harsh conditions of disaster areas, understanding of current feature of collapsed buildings, terrain, and other infrastructures is critical issue for disaster managers. However, because of difficulties in acquiring the geographical information of the disaster site such as large disaster site and limited capability of rescue workers, comprehensive site investigation of current location of survivors buried under the remains of the building is not an easy task for disaster managers. To overcome these circumstances of disaster site, this study makes use of an unmanned aerial vehicle, commonly known as a drone to effectively acquire current image data from the large disaster areas. The framework of 3D model reconstruction of disaster site using aerial imagery acquired by drones was also presented. The proposed methodology is expected to assist rescue workers and disaster managers in achieving a rapid and accurate identification of survivors under the collapsed building.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.4
• /
• pp.1227-1259
• /
• 2014

This paper explores agricultural extension systems, extension challenges, research and extension models, governance structures of agricultural extension and advisory services in Sudan. Agricultural extension services in Sudan are provided by a variety of governmental department and corporation. The Technology Transfer and Extension Administration under the Ministry of Agriculture and Irrigation, had been launched during mid 2000's aims at making extension systems farmer driven and farmer accountable by way of new institutional arrangements for technology dissemination in the form of community participation approach at the state level, to make the extension reforms have the active participation of farmers/farmer groups. The main problem facing agricultural extension services in developing countries is poor link between extension organization and research. Both extension administration and Agricultural Research Corporation (ARC) are operating as departments of ministry of Agricultural and irrigation for very long time. There are three recommendations to achieve the effectiveness of the Agricultural Research Corporations (ARC) in reaching farmers. Firstly, extension staff members should be assigned to every ARC station. Secondly, the ARC might increase positions for Agricultural development specialist or Farming System Research (FSR) specialist. Their role would be to reflect the needed of farmer and translate them to the researchable topics. Thirdly, researcher should conduct more research on farmer's fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.386-392
• /
• 2020

The self-weight of the 3D printing concrete increases with increasing printing height. Therefore, the lower layer must be hardened within a suitable time to secure continuous printing performance. In particular, the hardening speed of concrete is slow in the winter season when the temperature was low. Hence, the early strength of 3D printing concrete requires improvement. In domestic and international literature, cases of increasing the early strength of concrete using inorganic chemical additives, such as amine-based, nitrate-based, sodium-based, and calcium-based, have been reported. In this study, early strength improvement-type additive samples (amine-based, nitrate-based, sodium-based) were prepared, and their performance was evaluated. When using a nitrate-based additive, the early strength was increased significantly in a 10 ℃ environment. In addition, it was possible to secure a higher early strength than the existing 3D printing concrete mixed at 20 ℃.

• New & Renewable Energy
• /
• v.8 no.3
• /
• pp.30-37
• /
• 2012

In this study, we studied solar cell and fuel cell. To estimate the technology competitiveness, we used patent analysis using patent information and delphi method. For patent analysis, PII indicating the impact of patent was used. Also to analysis PII, citations data of registered and published patent were used from 2001 through 2010 in the United States, Japan, South Korea and the European Patent Office. And the delphi method results of the 'International trend analysis on the Green Energy Technology and the establishment of international cooperation models(2009)' were cited to estimate the technology level. According to the analysis results, Korea's patent registration growth rate was fairly high, but the patent impact and technology levels were significantly lower than in the United States, Japan and Germany. Especially in the solar cell, United States's PII is 1.8, but Korea's PII is 0.2. And the technology level of United States is 7 to 8, but Korea's is 5 to 6. Therefore, to improve technology competitiveness, Korea need to enhance the core technology R&D, and set up the consumer-oriented R&D strategy for commercialization from R&D planning phase. In this study, we analysed competitiveness of renewable energy which is not actively discussed. But there are limitations of the study because we used the result of past research and patent data in the past 10 years. Therefore to accurate research the period of patent data should be extended. Finally diverse indicators for measuring the technology competitiveness should be researched and developed.

• Journal of the Korean Society for information Management
• /
• v.26 no.3
• /
• pp.377-394
• /
• 2009

There are some limitations in the existing bibliometric methods to satisfy the various requests of the interest parties including researchers, managers, policy makers to identify 1) which research group or researcher is the key player, and the overall trends of the particular technological sub-fields, 2) which research groups, institutions or countries mainly use their research outputs, 3) what are the spin-offs from research outputs to some scientific and technological fields, 4) in which levels they are when comparing their quantitative and qualitative research outputs to those of other competitive institutions. It is essential to develop new informetric indicators and methodologies in order to satisfy stakeholder's various demands and to strengthen qualitative analysis in measuring research performance. This study suggested informetric indicators such as article quality index, citation impact index, international cooperation index, excellent article production index and methodologies including citation analysis, text mining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.382-390
• /
• 2018

This study developed a model to evaluate the quality management system of a medical device manufacturing company, and applied it to medical device manufacturers to understand the impact on business performance in response to international regulations and industry's change. This study prepared preliminary items, defined four (4) major factors (Plan-Do-Check-Act) that consist of the evaluation layers and items per category according to prior research review and expert interview, and calculated the weight and importance using AHP. The study results showed that responsibility & authority and quality objective in Planning Category, product-related requirement and R&D in Doing Category, Measuring and monitoring in Check Category, and review of meeting Regulatory and regulation in Action Category are relatively more important factors. The evaluation model developed based on the calculated weight and importance to business performance was applied to medical device manufacturers to investigate and analyze the implementation level of QMS and its impact on business performance according to each category. Most medical device manufacturers to be studied showed a reasonable level of QMS and effective business performance. Almost all the evaluation layers and items in the four (4) factors had a significant influence on business performance. Although the medical device quality management system is aimed mainly at license acquisition, it is important that management environment factors not related directly to licensing and authorization are important to business performance, and it is effective when these factors are integrated and operated within and outside the manufacturer.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.43-58
• /
• 2005

Piracy is the enemy of the human race. Pirates commit acts of murder, robbery, plunder or other villainous deeds at sea, cruelly against humanity. The Republic of Korea(ROK), as a big maritime country, is obliged to suppress piracy under international treaties it ratified, including the UN Convention on the Law of the Sea and the two 1988 Conventions against maritime terrorism The Korean government is recently taking a positive attitude towards the regional cooperation which is necessary for the suppression of piracy in the waters of Southeast Asia In spite of the effects of international cooperation to prevent piracy, it is recently on an increasing trend every year. Such circumstances may have a bad effect on the sound development of world economy by means of trade at sea as well as treat to the safety of crews and safe operation of ships. This paper aims to suggest the countermeasures against piracy in terms of criminal law, civil law and international law in order to secure safe operation of vessels at sea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.128-133
• /
• 2020

This study was conducted to demonstrate the manufacturing process for producing high-quality solar salt. The design criteria of the manufacturing process, which was studied in a previous study, was applied to an actual manufacturing system to evaluate its performance. The design factors applied were the drying air temperature and the temperature of the washing water. They were 100℃ or less and 10℃ or less, respectively. Two standards were applied to the process performance evaluation. Standard (I) was the international food standard for solar salt, and standard (II) was the quality standard for high-quality solar salt production. The main quality evaluation items were the moisture content and salinity, and the color characteristics were also measured (p<0.05). The manufacturing process of solar salt consisted of five steps, and the quality change was measured for each step. The measured quality was appropriate to the standard (I) from the third-step process. In addition, the quality of the high-quality solar salt was suitable for the standard (II) from the fourth-step process. Therefore, the performance of the proposed solar salt production process met international standards. The improvements in the production of high-quality solar salt will improve international competitiveness in the future.