• 대한토목학회논문집
• /
• 제39권3호
• /
• pp.369-380
• /
• 2019

PSC 구조물에 폭발과 같은 극한하중이 짧은 시간 동안 발생하게 되면 급작스러운 파괴와 그로 인한 수많은 인명 및 재산피해를 발생시킨다. 하지만 원전격납구조물, 가스탱크와 같은 PSC 구조물의 경우 방호 및 방재개념이 포함된 구조설계가 적용되지 않은 실정이며, 특히, 구조물 내부에서 발생하는 폭발압력하중은 피해규모가 외부폭발에 비해 훨씬 크기 때문에 내부폭발하중에 대한 검증은 반드시 필요하다. 따라서, 본 연구에서는 원전격납구조물의 내부폭발에 대한 저항성능을 검토하기 위해 이방향 프리스트레스트 콘크리트 축소모형을 제작하였다. 내부폭발 실험은 22.68, 27.22, 31.75 kg (50, 60, 70 lbs)의 ANFO 폭약을 이용하여 시편으로부터 1,000 mm의 거리에서 폭발시켰으며, 압력하중, 처짐, 변형률, 균열형상, 긴장력 변화 등의 데이터를 분석하였다. 본 연구결과를 이용하여 원전격납구조물의 내부폭발하중 발생 시 손상도 범위 예측이 가능할 것으로 판단된다.

• 상하수도학회지
• /
• 제32권2호
• /
• pp.77-87
• /
• 2018

In this study, the effects of operating conditions on the formation of reversible and irreversible fouling were investigated in the filtration using ceramic membrane for water treatment process. The effect of coagulation pretreatment on fouling formation was also evaluated by comparing the performance of membrane filtration both with and without addition of coagulant. A resistance-in-series-model was applied for the analysis of membrane fouling. Total resistance (RT) and internal fouling resistance (Rf) increased in the membrane filtration process without coagulation as membrane flux and feed water concentrations increased. Internal fouling resistance, which was not recovered by physical cleaning, was more than 70% of the total resistance at the range of the membrane flux more than $5m^3/m^2{\cdot}day$. In the combined process with coagulation, the cake layer resistance (Rc) increased to about 30-80% of total resistance. As the cake layer formed by coagulation floc was easily removed by physical cleaning, the recovery rate by physical cleaning was 54~90%. It was confirmed from the results that the combined process was more efficient to recover the filtration performance by physical cleaning due to higher formation ratio of reversible fouling, resulted in the mitigation of the frequency of chemical cleaning.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.81-88
• /
• 2020

In this paper, the performances of the electrical characteristics of the Fused Deposition Modeling (FDM) 3D-printed flexible resistance sensor was evaluated. The FDM 3D printing flexible resistive sensor is composed of flexible-material thermoplastic polyurethane and a conductive PLA (carbon black conductive polylactic acid) polymer. While 3D printing, polymer filaments heat up quickly before being extruded and cooled down quickly. Polymers have poor thermal conductivity so the heating and cooling causes unevenness, which then results in internal stress on the printed parts due to the rapidity of the heating and cooling. Electrical resistance measurements show that the 3D-printed flexible sensor is unstable due to internal stress, so the 3D-printed flexible sensor resistance curve does not match the increases and decreases in the displacement curve. Therefore, annealing was performed to eliminate the mismatch between electrical resistance and displacement. Annealing eliminates residual stress on the sensor, so the electrical resistance of the sensor increases and decreases in proportion to displacement. Additionally, the resistance is lowered in comparison to before annealing. The results of this study will be very useful for the fabrication of various devices that employ 3D-printed flexible sensor that have multiple degrees of freedom and are not limited by size and shape.

• 대한미생물학회지
• /
• 제35권2호
• /
• pp.181-190
• /
• 2000

To investigate resistance to lamivudine (3TC), we examined the incidence of M184V in 20 HIV-1 patients treated with 3TC for $13.1{\pm}9$ months. Fourteen of 20 patients had been exposed to zidovudine (ZDV) or didanosine (ddI) prior to 3TC therapy. Nested PCR targeting to reverse transcriptase (RT) and direct sequencing were performed for peripheral blood mononuclear cells sampled serially. There were resistance mutations to ZDV in at least 9 patients at baseline, although there was no resistance mutation to 3TC. We could detect M184V in 6 (30%) out of 20 patients. The incidence of M184V increased as the duration of therapy prolongs (13% in samples <12 months; 47% in samples ${\ge}12$ months). The frequency of mutation M184V was higher in patients with previous mutation to ZDV than in patients with wild type. Resistance mutation was not detected in 7 patients. This study shows that resistance to 3TC tends to develop rapidly in patients with baseline mutations or two drugs combination therapy than in those treated simultaneously with triple drugs. This report is the first on resistance to 3TC in Korean AIDS patients.

• 한국응용곤충학회지
• /
• 제32권4호
• /
• pp.373-381
• /
• 1993

Resistance evolution to organophosphate-based pesticides in apple and pear inhabiting arthropods of western North America extends to many classes of pest and some beneficial species. Resistance management programs to minimize resistance in pests while exploiting it in natural enemies have met with mixed success. Among beneficials, resistances have been exploited mostly among predators of pest mites. Evolution of resistant mites, leafminers, leafhopper, aphids, leafrollers and some internal fruit feeders have led to development of new monitoring methods and means to delay or avoid resistance. But it is resistance to azinphosmethyl in codling moth (Cydia pomonella) that is changing the pest control system and moving it from chemical to biologically-based means. Newly merging IPM system will depend more on use of biological, cultural, behavior and genetic controls. But more selective pesticides also will be needed to augment pheromones, resistant host plants and genetically altered organisms. These more biologically-based tactics will be prone to resistance evolution in pests as well, if used too unilaterally and/or too extensively.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.50-59
• /
• 2020

고 흡수성 폴리머(SAP)는 콘크리트 내부에서 물을 흡수하여 팽창하며 물을 방출하면서 수축한다. 이 과정을 통해 콘크리트는 내부 양생 효과를 얻을 수 있지만 팽창한 SAP가 차지하고 있던 공간은 공극으로 존재하게 된다. 따라서 본 연구에서는 SAP를 혼입한 콘크리트의 기초 물성 및 염화물 침투 저항성을 평가하여 SAP의 내부 양생과 공극에 의한 영향을 평가하였다. 또한 SAP에 의한 내부 양생 효과를 평가하기 위해 양생 조건을 수중 양생과 봉함 양생으로 구분하여 실시하였다. 실험 결과, 수중 양생의 압축강도는 혼입율에 따라 큰 차이가 없었으며, 봉함 양생의 경우에는 SAP의 혼입율이 증가함에 따라 압축 강도가 증가하는 경향을 나타냈다. 봉함 양생의 경우 내부 양생 효과가 압축 강도 증가에 영향을 준 것으로 판단된다. 염화물 확산계수 측정 결과, SAP의 혼입율 증가에 따라 확산계수가 감소하는 경향을 나타냈으며, 특히 봉함 양생은 내부 양생 효과로 인해 수화 반응이 촉진되어 염화물 침투 저항성이 더욱 개선된 것으로 판단된다. 양생 조건이 다른 경우 표면 전기저항을 이용해 염화물 침투 저항성을 평가하는 것은 부적절한 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.70-76
• /
• 1995

본 연구는 왁스첨가순서(添加順序), 첨가량(添加量), 왁스종류(種類)가 Isocyanate 접착(接着) PB의 성질(性質)과 내수성(耐水性)에 미치는 영향(影響)을 구명(究明)하기 위해서 실시(實施)되었다. 왁스첨가순서(添加順序)는 PB의 기계적(機械的) 성질(性質) 및 내수성(耐水性)에 유의적(有意的)인 영향(影響)을 미치지는 않았다. 왁스에멀젼 첨가량(添加量)을 증가(增加)시킴으로써 접착력(接着力) 및 휨강도(强度) 내수(耐水) MOR은 감소(減少)되었지만 상태(常態) MOR 및 MOE는 감소(減少)되지 않았다. 상태접착력(常態接着力), 상태(常態) 및 내수(耐水) MOR과 MOE는 솔리드왁스량(量)을 증가(增加)시킴으로써 감소(減少)되지 않았지만 내수접착력(耐水接着力)은 감소(減少)되었다. 1% 및 1.5% 왁스량(量)을 첨가(添加)한 보드는 0.5% 왁스를 첨가(添加)한 보드와 비교(比較)해 보았을 때 내수성(耐水性)이 증가(增加)되지는 않았다. 솔리드왁스를 첨가(添加)한 보드의 접착력(接着力)은 왁스에멀젼을 첨가(添加)한 보드보다 더 좋은 결과(結果)를 나타내었다. 휨강도(强度)의 MOR 및 MOE, 내수성(耐水性)은 솔리드왁스와 왁스에멀젼간에 유의적(有意的)인 차이(差異)를 보이지는 않았다.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1195-1201
• /
• 2016

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.275-279
• /
• 2012

Ni-W alloy deposits have lately attracted the interest as an alternative surface treatment method for hard chromium electrodeposits because of higher wear resistance, hardness at high temperature, and corrosion resistance. This study deals with influences of process variables, such as electodeposition current density, plating temperature and pH, on the internal stress of Ni-W nanocrystalline deposits. The internal stress was increased with increasing the applied current density. With increasing applied current density, the grain size of the deposit decreases and concentration of hydrogen in the deposit increases. The subsequent release of the hydrogen results in shrinkage of the deposit and the introduction of tensile stress in the deposit. Consequently, for layers deposited at high current density, cracking occurs readily owing to high tensile stress value. By increasing the temperature of the electrodeposition from $60^{\circ}C$ to $80^{\circ}C$, the internal stress was decreased. It seems that an increase in the number of active ions overcoming the activation energy at elevated temperature caused a decline in the concentration polarization and surface diffusion. It decreased the level of hydrogen absorption due to the lessened hydrogen evolution reaction. Therefore, the lower level of hydrogen absorption degenerated the hydride on the surface of the electrode, resulting in the reduction of the internal stress of the deposits. By increasing the pH of the electrodeposition from 5.6 to 6.8, the internal stress in the deposits were slightly decreased. It is considered that the decrease in internal stess of deposits was due to supply of W complex compound in cathode surface, and hydrogen ion resulted from decrease of activity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.553-556
• /
• 2004

This paper is to investigate the spalling and fire endurance of high performance RC column member with PP fiber and lateral confinement of metal lath and non fire resistance removal type form. According to test results, combination of PP fiber and metal lath as well as use fire resistance non removal type form had favorable fire resistance by discharging internal vapour pressure and lateral confining. After fire endurance test, compressive strength decreased markedly caused by internal expansion pressure and crack. Residual strength of plain concrete was decreased to $22\%$. The use of PP fiber and lateral confinement of metal lath and non removal type form enhanced the residual strength above $40\%$. Especially, the combination of $0.1\%$ of PP fiber and lateral confinement with the level of 2.3T exhibited more than $51\%$ of residual strength. Therefore, to improve fire endurance and spalling resistance, the combination of $0.1\%$ of PP fiber and metal lath with 2.3T can be the proper measure.