• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.60-72
• /
• 2016

This study aims to suggest strategies of development and management for large parks by examining experimental cases of park governance models related to a shift away from public administration. The shifts towards governance as well as public-private partnership in city parks have involved the need for new public management. This study has analyzed two exemplary cases of Presidio Park and Sydney Harbour National Park in the aspects of planning process and management strategies, as the results derived the meaning and effect of park governance management and is also an essential prerequisite for the achievement of the model. There are six dimensions of research frames--namely policy, governance, partnership, finances and funds, design and maintenance-management, and evaluation-monitoring-taken as the basis for this study. Through the analysis, several key characteristics of these cases were elicited. First, the park planning process must be consistent in carrying a policy from planning to implementation, and furthermore, an independent operation body which can properly authorize an execution and uphold its responsibility from the public could serve in adaptable park services. Second, it has been suggested to build various partnerships with PAs and NGOs, private corporations, community groups, and academic institutes that allow it to expand the diversity of the park activities. Third, there has been experimental exploration to achieve a financially self-sufficient model by establishing internal revenue models and hence allow the reduction of reliance on public finances. The result of this type of park management would allow for improving park quality and make the park space a vital part of the local economy. Fourth, the strategies for a local community's participation are needed to allow the community to become a producer as well as a consumer. This study shows that the direction and significance of the park governance model regarding the fact that the plans sought by the two parks are extending the layout of public-centered discussion to the private sector and the third non-governmental sector including to the local community group. This shows both implications and limitations, such as the risk of privatization through non-governmental activities at the park or the violation of essential functions as a public good due to a profit-generating management policy for securing financial self-sufficiency. At the current point in which plans are under way for the development and management of large parks, a park governance model requires continuous study and expansion of discussion in the future.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.27-32
• /
• 1984

Recently, it has been reported that acute and chronic intoxication of Cd was concerned with environmental hygienic studies. In this study the effect of Ca and V-D was given directly into the diet with water containing the 20 ppm of Cd during so days. The results obtained were summarized as follows; 1. Administration of Ca and V-D inhibited the reduction of body weight induced by Cd. The internal organ weights of rats receiving Cd solution without Ca and V-D were generally increased except lung. 2. The values of hematocrit were higher in rats receiving Cd solution supplemented Ca and V-D than those doing Cd solution without Ca and V-D, and the levels of cholesterol were in- creased in experimental rats compared with control group. Total protein concentration in serum of the both group intaking the Ca and Y-D, and without Ca and V-D was not significant. 3. The concentration of Cd and Mg in liver was increased in rats feeding only Cd solution than those doing Ca and V-D group, whereas the concentration of Cu, Zn and Ca was decreased. The concentration of Cd, Cu and Ca in kidney was decreased in only Cd solution group, whereas by supplementing Ca and vitamin D was increased the concentration of Cd, Cu and Zn.

• Journal of Acupuncture Research
• /
• v.22 no.3
• /
• pp.253-270
• /
• 2005

Objective : The purpose of this study is to establish a category for acupuncture therapy by appropriate etiological analysis and differenciation of edema. Methods : We arrange Huang Di Nei Jing and thirty four kinds of literature about edema. Results : 1. The cause of Edema is functional disorder of lung, spleen, kidney, bladder and tri-energizer by six kinds of natural factors, internal injury and loss of nutritions. 2. Edema compartmentalize into the water of five zang organs, several kinds of edema(e,g. 5, 10, 12, 24) and yang & yin edema. 3. An ultimate cause of edema pathogenesis is the disturbance of Qi function in kidney. 4. In view of the results so far achived,'GV26(水淸)' is a vitally important acupoint in acupuncture treatment of edema.'GV26(水淸)' and 'CV9(水分)' are very useful acupoints in moxibustion. 5. In the acupuncture and moxibustion treatment of yang edema, we can use acupoints as like 'GV26(水溝)', 'S36(足三里)', 'B20(脾兪)' and 'SP9(陰陵泉)' by purgation and reduction for expelling wind, reducing fever and eliminating dampness. In an instance of yin edema, we can use acupoints as like 'CV9(水分)' 'S36(足三里)', 'CV6(氣海)', 'B20(脾兪)', 'B23(腎兪)' and 'K3(太谿)' by reinforcement for tonifying spleen yang-middle energizer-, qi-transmission and water promoting.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.206-225
• /
• 2012

General status of pediatric dentistry in Korea is to conduct vigorous academic activities and specialized medical care centering the Korean Association of Pediatric Dentistry (KAPD) that has about 1,000 pediatric dentists as members, pediatric dentistry departments of 11 Colleges of Dentistry, numbers of pediatric dentistry training institutions and private clinics specialized in children. From 1996, the accredited pediatric dentists were produced by the KAPD and from 2008, the state began to produce the accredited pediatric dentists. Since then, doctors with expertise in pediatric care had opened private clinics in addition to the university hospitals, it became the basis of a momentum to deepen the specialty of pediatric dentistry. The Dentistry community of Korea is going through rapid and profound changes recently, and the underlying reasons for such changes can be classified largely into a few categories: (1) Decreasing population and structural changes in population (2) Increase in numbers of dentists, (3) Changes in the pattern of dental diseases and (4) Changes in medical environment. In Korea, the children population in the age range of 0 ~ 14 years old had been decreased by 2 million in 2010 compared to that of 2000 due to reduction of birth rate. The current population of children in the age range of 0 ~ 4 years old in 2010 takes up 16.2% of the total population, but it is estimated that such percentage would decrease to 8.0% by 2050. Such percentage is largely behind the estimated mean global population of 19.6% by 2050. On the other hand, the number of dentists had been largely increased from 18,000 in 2000 to 25,000 in 2010. And it is estimated that the number will be increased to 41,000 by 2030. In addition, the specialized personnel of Pediatric dentistry had been shown as increased by 2.5 times during past 10 years. For the changes in the pattern of dental diseases, including dental caries, each df rate of 5 years old children and 12 years old children had been decreased by 21.9% and 16.7% respectively in 2010 compared to 2000. Each df Index also had been decreased by 2.5 teeth and 1.2 teeth respectively. The medical expenditure of Korea is less than that of OECD and more specifically, the expenditure from the National Health Plan is less than OECD but the expenditure covered by households is larger than OECD. These facts indicate that it is considered as requiring the coverage of the national health plan to be reinforced more in the future and as such reinforcement needs continuous promotion. In medical examination pattern of Pediatric dentistry, the preventive and corrective treatment were increased whereas the restorative treatment was decreased. It is considered that such change is caused from decrease of dental caries from activation of the prevention project at national level. For the restorative treatment, the restorations in use of dental amalgam, pre-existing gold crowning and endodontic treatment had been decreased in their proportion while the restorative treatment in use of composite resin had been increased. It is considered that such changes is caused by the change of demands from patients and family or guardians as they desired more aesthetic improvement along with socio-economic growth of Korean society. Due to such changes in dentistry, the pediatric dentistry in Korea also attempts to have changes in the patterns of medical examination as follows; It tends to implement early stage treatment through early diagnosis utilizing various diagnostic tools such as FOTI or QLF. The early stage dental caries so called white spot had been included in the subjects for dental care or management and in order to do so, the medical care guidelines essentially accompanied with remineralization treatment as well as minimally invasive treatment is being generalized gradually. Also, centering the Pediatric dentists, the importance of caries risk assessment is being recognized, in addition that the management of dental caries is being changed from surgical approach to internal medicinal approach. Recently, efforts began to emerge in order to increase the target patients to be managed by dentists and to expand the application scope of Pediatric dentistry along with through such changes. The interest and activities of Pediatric dentists which had been limited to the medical examination room so far, is now being expanded externally, as they put efforts for participating in the preventive policy making process of the community or the state, and to support the political theories. And also opinions are being collected into the direction that the future- oriented strategic political tasks shall be selected and researches as well as presentations on the theoretical rationale of such tasks at the association level.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.303-312
• /
• 2018

This study was conducted to investigate the relationship between the decrease of forest biomass by forest thinning and the change of temperature in the natural forest by measuring forest biomass and temperature before and after forest thinning in the Pusan National University forest where afforestation had been carried out. We intended to investigate the relationship between the forest biomass, estimated by calculating the Basal area, Crown area and Crown volume using the same formula to the same quadrat before and after forest thinning, and the forest temperature. Temperature measurement was carried out on April 20, 2016 through 28 before forest thinning, July 26, 2016 through November 4 around the time of forest thinning, and April 15, 2017 through May 8 after forest thinning. A temperature data logger was installed to point north at the height of 2.0 m above the ground in the center of the quadrat to record data every 10 minutes during the measurement periods. We used the AWS (Automatic Weather Station) data of the Dongnae-gu area located in the nearby city because it was difficult to set the control group since the whole forest was the subject to the forest thinning. The analysis of the relationship between forest biomass change and temperature showed that the change in temperature inside the forest was the greatest in the midday (12:00 - 15: 00) and was highly correlated with the Crown volume in the forest biomass. The temperature increase was much larger (average $1.91^{\circ}C$) 1 year after forest thinning than immediately after forest thinning (average $0.74^{\circ}C$). The comparison of the decrease rate of Crown volume and the increase in temperature showed that the Pitch pine community, which showed the highest decrease of Crown volume by 15.4%, recorded the highest temperature rise of $1.06^{\circ}C$ immediately after forest thinning and $2.49^{\circ}C$ 1 year after forest thinning. The Pitch pine-Korean red pine community, which showed the lowest Crown volume reduction rates with 5.0%, recorded no significant difference immediately after forest thinning but a temperature rise of $0.92^{\circ}C$ 1 year after forest thinning. The results confirmed that the decrease of forest biomass caused by forest thinning led to a rapid increase of the internal temperature. The fact that the temperature increase was more severe after 1 year than immediately after forest thinning confirmed that the microclimate changes due to the removed biomass cannot be recovered in a short time.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2016

The purpose of this study was to provide resources for medical exposure reduction through evaluation of organ dose and image resolution for lumbar spine around according to the size of the collimator in DR system. The size of the collimator were varied from $8^{\prime\prime}{\times}17^{\prime\prime}$ to $14^{\prime\prime}{\times}17^{\prime\prime}$ by 1" in AP and lateral projection for the lumbar spine radiography with RANDO phantom. The organ dose measured for liver, stomach, pancreas, kidney and gonad by the glass dosimeter. The image resolution was analyzed using the Image J program. The organ dose of around lumbar spine were reduced as the size of the collimator is decreased in AP projection. There were no significant changes decreasing rate whenever the size of the collimator were reduced 1" in the gonad. The organ dose showed higher on liver and kidney near the surface in lateral projection. There were decreasing rate of less than 5% in liver and kidney, but decreasing rate was 24.34% in the gonad whenever the size of the collimator were reduced 1". Organ dose difference for internal and external of collimator measured $549.8{\mu}Gy$ in the liver and $264.6{\mu}Gy$ in the stomach. There were no significant changes organ dose difference that measured $1,135.1{\mu}Gy$ in the gonad. Image Quality made no difference because SNR and PSNR were over than 30 dB when the collimator size is less than $9^{\prime\prime}{\times}17^{\prime\prime}$ on AP projection and $10^{\prime\prime}{\times}17^{\prime\prime}$ on lateral projection. Therefore, we are considered that the recommendations criterion for control of collimator were suggested in order to reduce unnecessary X-ray exposure and to obtain good image quality because lumbar spine radiography contains a lot of peripheral organs rather than other area radiography.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.93-103
• /
• 1981

It is well-known that nowadays heat resisting and anti-corrosive materials have been widely used as the components materials of gas turbines, nuclear power plants and engines etc. In the fields of machine production industry. And materials for engine components, like as the exhaust valve of internal combustion engine, have been required to operate under the high temperature range of $700^{\circ}C$-$800^{\circ}C$ and high pressured gas with repeated mechanical load for the high performance of engines. For these components, friction welding for bonding of dissimilar steels can be applied for in order to obtain process shortening, production cost reduction and excellent bonding quality. And age hardening recently has been noticed to the heat resisting materials for further strengthening of high temperature strength, especially high temperature fatigue strength. However, it is difficult to find out any report concerning the effects of age hardening for strengthening high temperature fatigue strength to the Friction welded heat resisting and anti-corrosive materials. In this study the experiment was carried out as the high temperature rotary bending fatigue testing under the condition of $700^{\circ}C$ high temperature to the friction welded domestic heat resisting steels, SUH3-SUS303, which were 10hr., 100hr. aging heat treated at $700^{\circ}C$ after solution treatment 1hr. at $1, 060^{\circ}C$ for the purpose of observing the effects of the high temperature fatigue strength and fatigue fracture behaviors as well as with various mechanical properties of welded joints. The results obtained are summarized as follows: 1) Through mechanical tests and micro-structural examinations, the determined optimum welding conditions, rotating speed 2420 rpm, heating pressure 8kg/mm super(2), upsetting pressure 22kg/mm super(2), the amount of total upset 7mm (heating time 3 sec and upsetting time 2 sec) were satisfied. 2) The solution treated material SUH 3, SUS 303, have the highest inclination gradient on S-N curve due to the high temperature fatigue testing for long time at $700^{\circ}C$. 3) The optimum aging time of friction welded SUH3-SUS 303, has been recognized near the 10hr. at $700^{\circ}C$ after the solution treatment of 1hr. at $1, 060^{\circ}C$. 4) The high temperature fatigue limits of aging treated materials were compared with those of raw material according to the extender of aging time, on 10hr. aging, fatigue limits were increased by SUH 3 75.4%, SUS 303 28.5%, friction welded joints SUH 3-SUS 303 44.2% and 100hr. aging the rates were 64.9%, 30.4% and 36.6% respectively. 5) The fatigue fractures occurred at the side of the base matal SUS303 of the friction welded joints SUH 3-SUS 303 and it is difficult to find out fractures at the friction welding interfaces. 6) The cracking mode of SUS 303, SUH 3-303 is intergranular in any case, but SUH 3 is fractured by transgranular cracking.

• Korean journal of food and cookery science
• /
• v.28 no.4
• /
• pp.399-405
• /
• 2012

This study was carried out to investigate the effect of safflower seed powder on the physicochemical characteristics of ground pork during refrigerated storage. Three types of ground pork were evaluated: 20% pork fat added (PF, control), 10% pork fat and 10% added safflower seed powder (PFS), and 20% added safflower seed powder (SS). The pH increased during storage, but decreased after 10 days of the storage (p<0.05). The pH was lower in PFS and SS than that in PF after 10 days of storage (p<0.05). The TBARS (2-thiobarbituric acid reactive substances) values increased with longer storage period (p<0.05), and those of PF, PFS and SS were 1.186, 0.686 and 0.577 mg MA/kg, respectively, after 10 days of storage. The $L^*$ values for external color of PF and PFS decreased (p<0.05), but that of SS was not significantly different after a longer storage period. The $a^*$ values decreased (p<0.05), but the $b^*$ values were not significantly different with longer storage period. The $L^*$ values for internal color of PFS and SS decreased (p<0.05), but that of PF was not significantly different with longer storage period. The $a^*$ value of PF decreased (p<0.05), but that of SS increased with longer storage period. The $b^*$ value decreased (p<0.05), but those of PFS and SS were not significantly different with longer storage period. Water holding capacity decreased with longer storage period, and that of SS was the highest (p<0.05). Cooking loss of PFS and SS was not significantly different with longer storage period, and that of PF was the highest (p<0.05). The reduction in diameter of the samples was not significantly different with longer storage period, and that of PF was the highest (p<0.05). Hardness and chewiness of samples increased, but springiness and cohesiveness decreased with longer storage period (p<0.05). Replacing animal fat with safflower seed powder was effective and may be useful as an innovative meat product.