• Korean Journal of Agricultural Science
• /
• v.19 no.1
• /
• pp.65-78
• /
• 1992

The paper describes the comparison between observed and predicted stress-strain characteristics of marine silty clay in Dangjin district. For prediction, the hyperbolic model which is applied the parameters acquiring by physical and triaxial compression test was adopted, and the obtained results were summarized as follows: 1. The Young's modulus were increased with decreasing of moisture contents and increasing of dry density. 2. The most affective factor to hyperbolic model is lateral stress and dry density. and than cohesion and internal friction angle. 3. The comparision between the statistical and hyperbolic values of maximum deviator stress have few accordance. and the statisticals is lower than the hyperbolics. 4. Without. much labor and tiresome procedures, effective computer program was made and applied, but technical procedure for prevents test errors of parameter calculation is importants.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.5
• /
• pp.532-541
• /
• 2003

Background : Phospholipase $A_2$ ($PLA_2$) has been known to be involved in the pathogenesis of acute lung injury (ALI) including ARDS. Since doxycycline has the property of inhibiting secretory group II $PLA_2$, the therapeutic effect of doxycycline hyclate was investigated for gut ischemia/reperfusion (I/R)-induced ALI in Sprague-Dawley rats. Methods : ALI was induced in Sprague-Dawley rats by clamping of the superior mesenteric artery for 60 min, followed by 120 min of reperfusion. To confirm the pathogenetic mechanisms of this ALI associated with neutrophilic oxidative stress, we measured bronchoalveolar lavage (BAL) protein content and lung MPO, and performed cyto-chemical electron microscopy for detection of free radicals, assay of $PLA_2$ activity and cytochrome-c reduction assay. Results : In gut I/R-induced ALI rats, protein leakage, pulmonary neutrophil accumulation, free radical production and lung $PLA_2$ activity were all increased. These effects were reversed by doxycycline hyclate. Conclusion : Doxycycline appears to be effective in ameliorating the gut I/R-induced ALI by inhibiting $PLA_2$, thereby decreasing the production of free radicals from neutrophils.

• Research in Community and Public Health Nursing
• /
• v.11 no.2
• /
• pp.333-346
• /
• 2000

The purpose of this study was designed to test and develope the structural model that explains health promoting behaviors among college students in Korea. The hypothetical model was constructed on the Pender's Health promotion Model(l996) and the inclusion of some influential factors for life satisfaction. The conceptual framework was built around eight constructs. Exogenous variables included in the model were self-esteem, perceived health status, self-efficacy, internal locus of control, chance locus of control. powerful other locus of control. Endogenous variables were health promotion behaviors and life satisfaction. The results are as follows; 1. The overall fit of the hypothetical model to the data was moderate <$x^2$=4.18(df=11. p=0.041), GFI= 0.99, AGFI= 0.76, RMR= 0.019, CFI= 0.99, CN= 248.50> 2. Path and variable of the model were modified by considering both its theoretical implication and statistical significance of parameter estimates. Compared to the hypothetical model. the revised model has become parsimonious and had a better fit to the data expected in a chi-square value <$x^2$=8.43( df= 16, p=0.21), GFI= 0.99, AGFI= 0.92., RMR= 0.024, CFI= 0.99, CN= 312.01> 3. Some of the predictive factors. especially self efficacy. self esteem. powerful others locus of control. perceived health status revealed the direct effects on health promoting behaviors. Of these variables. self-efficacy was the most signigicant factor. These predictive variables of health promoting behaviors explained 59% of total variances in the model. 4. Health promoting behaviors, self-esteem. and perceived health status revealed direct effect on the life satisfaction. Self-efficacy was identified as an important variable that contributed indirectly to improve life satisfaction by enhancing health promoting behaviors. These predictive variables of life satisfaction explained 42% of total variances in the model. In conclusion. the derived model in this study is considered appropriate in explaining and predicting health promoting models and life satisfaction among college students in Korea and could effectively be used as a reference model for further studies by suggesting a direction in health promoting nursing practices.

• The Korean Journal of Elementary Counseling
• /
• v.9 no.2
• /
• pp.143-162
• /
• 2010

The purpose of this study is to construct Parent Attachment Scale for Children. Adapting the item consisting method used in Experiences in Close Relationships-Revised(ECR-R), Parent Attachment Scale for Children was constructed to measure child's attachment style with their parent, reliably and validly. Also, reliability and item trait informations based on item response theory were reviewed. First preliminary items were derived from the original items of ECR-R and existing Attachment Inventories. These items were modified and complemented to be easier and keep the original meaning of each item. Second preliminary items were administrated to 4~6th grades students(N=576). Finally, Parent Attachment Scale for Children were consisted with 30 items based on two-parameter graded response model. Internal consistency ranges of the scales of Parent Attachment Scale for Children are as follows : Avoidance scale is .94~.96; Anxiety scale is .85~.88. Test-retest reliability ranges are as follows; Avoidance scale is .71~.80; Anxiety scale is .53~.68. Item discrimination and item information value were within an appropriated range. Hierarchical cluster analysis with Ward's Method revealed four types of attachment style : Secure, Dismissing, Preoccupied, Fearful. Other implications and limitations of this study were discussed.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.274-280
• /
• 2014

Polysulfone (PSf) hollow fiber membranes were prepared via the nonsolvent induced phase separation technique. The cosolvent of ${\gamma}$-butyrolactone (GBL) was added to the polymer solution containing a mixture of PSf and N,N-dimethylacetamide (DMAc). Water was utilized as a precipitation nonsolvent. The morphology of prepared membranes was investigated using a field emission scanning electron microscopy. The fabricated membrane showed a typical asymmetric structure such as the dense layer on the porous support layer by the addition of GBL to the polymer solution. As the concentration of GBL increased, the asymmetric porous structure was shown to be more intensified. It was thought that the added GBL played a role of enhancing the liquid-liquid phase separation of the polymer solution, since the cosolvent of GBL might change the thermodynamic solubility parameter of the doping solution. Permeation properties through the prepared hollow fiber membranes were characterized by measuring the pure water flux and the solute rejection using $0.05{\mu}m$ polystyrene latex (PSL) beads. Experimental results revealed that the use of PEG as the internal coagulant enhanced the pure water flux up to 130 times compared to the use of EG while the rejection of the PSL beads decreased only 5%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.21-26
• /
• 2016

This paper presents a step-down DC-DC buck converter with a CCM/DCM dual-mode function for the internal power stage of portable electronic device. The proposed converter that is operated with a high frequency of 1 MHz consists of a power stage and a control block. The power stage has a power MOS transistor, inductor, capacitor, and feedback resistors for the control loop. The control part has a pulse width modulation (PWM) block, error amplifier, ramp generator, and oscillator. In this paper, an external capacitor for compensation has been replaced with a multiplier equivalent CMOS circuit for area reduction of integrated circuits. In addition, the circuit includes protection block, such as over voltage protection (OVP), under voltage lock out (UVLO), and thermal shutdown (TSD) block. The proposed circuit was designed and verified using a $0.18{\mu}m$ CMOS process parameter by Cadence Spectra circuit design program. The SPICE simulation results showed a peak efficiency of 94.8 %, a ripple voltage of 3.29 mV ripple, and a 1.8 V output voltage with supply voltages ranging from 2.7 to 3.3 V.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.25-32
• /
• 2018

This paper investigates the effect of rock discontinuities on a shear stress wave that is induced by earthquake or blasting and provides the result of numerical parametric studies. The numerical tests of different conditions of rock and discontinuity have been carried out after confirming that the numerical approach is valid throughout a verification analysis from which the test results were compared with a theoretical solution. In-situ stress condition was considered as a rock condition and internal friction angle and cohesive value, which are the shear strength parameters, were considered as discontinuities condition. The joint inclination angle was also taken into account as a parameter. With the various conditions of different parameters, the test results showed that a shear stress wave propagating through a mass is highly influenced by the shear strength of discontinuities and the condition of joint inclination angle as well as in-situ stress. The study results indicate that when earthquake or blasting-induced dynamic loading propagates through a jointed rock mass or a stratified soil ground the effect of in-situ stress and discontinuities including a stratum boundary should be taken into account when evaluating the dynamic effect on nearby facilities and structures.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.

• Journal of the Korea Convergence Society
• /
• v.13 no.5
• /
• pp.229-236
• /
• 2022

The goal of this research is to understand the extent to which active seniors' mobile app usage level affects their lifestyle and life satisfaction. For this, we surveyed for 15 days in early December 2021 targeting about 150 users nationwide. As the questionnaire content, the independent variable was "mobile app usage level", the parameter was "lifestyle", and the dependent variable was "life satisfaction". As a result of empirical analysis, reliability and exploratory factors between each variable were verified, and it was confirmed that internal consistency was secured. It was investigated that the concentration validity of each item was generally well confirmed. As a result of hypothesis testing by the structural equation, 'App usage level ⇨ Lifestyle' was 0.244, 'Lifestyle ⇨ Life satisfaction' 0.707, and 'App usage level ⇨ Life satisfaction 0.141' was adopted. This study shows that the higher the level of mobile app usage of active seniors, the higher the lifestyle. Also, the better the lifestyle, the better the quality of life. It is analyzed that life satisfaction will improve as the level of mobile app use increases. Therefore, in order to improve life satisfaction, it seems necessary to increase the level of app use and lifestyle.

• Phonetics and Speech Sciences
• /
• v.14 no.4
• /
• pp.45-56
• /
• 2022

This paper proposes an optimal methodology for automatically diagnosing and predicting the severity of the chronic kidney disease (CKD) using patients' utterances. In patients with CKD, the voice changes due to the weakening of respiratory and laryngeal muscles and vocal fold edema. Previous studies have phonetically analyzed the voices of patients with CKD, but no studies have been conducted to classify the voices of patients. In this paper, the utterances of patients with CKD were classified using the variety of utterance types (sustained vowel, sentence, general sentence), the feature sets [handcrafted features, extended Geneva Minimalistic Acoustic Parameter Set (eGeMAPS), CNN extracted features], and the classifiers (SVM, XGBoost). Total of 1,523 utterances which are 3 hours, 26 minutes, and 25 seconds long, are used. F1-score of 0.93 for automatically diagnosing a disease, 0.89 for a 3-classes problem, and 0.84 for a 5-classes problem were achieved. The highest performance was obtained when the combination of general sentence utterances, handcrafted feature set, and XGBoost was used. The result suggests that a general sentence utterance that can reflect all speakers' speech characteristics and an appropriate feature set extracted from there are adequate for the automatic classification of CKD patients' utterances.