• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.29-35
• /
• 1998

고품질의 6H-SiC 단결정을 성장하기 위하여 기판, 원료 및 성장에 사용되는 도가니에 대한 고순도 처리공정을 통하여 고순도화하여 결정성장을 시행하였다. 특히, 원료에 대해서는 순화처리전후의 XRD 분석을 행하여 고순도화된 원료의 상태를 확인하였다. 성장된 6H-SiC 단결정의 크기는 직경이 33mm, 길이는 11mm이었고, 기판으로의 사용 및 내부결함에 대한 관찰을 위하여 결정을 절단 및 연마하여 직경 33mm, 두께 0.5mm인 wafer를 제작하였으며, 광학현미경 및 Raman 분석을 이용하여 순화공정을 통해 제작된 wafer의 내부결함밀도 및 결정성을 측정하였다. 분석결과, micropipe 및 planar defect의 밀도는 각각 100개/$\textrm{cm}^2$, 30개/$\textrm{cm}^2$으로 순화처리를 통한 내부결함의 감소로 인해 고품질의 6H-SiC 단결정의 성장이 가능하였다

• 대한한방내과학회지
• /
• 제42권5호
• /
• pp.1045-1053
• /
• 2021

Objectives: This study investigated the effectiveness of acupuncture and herbal medicine (Gami-banhabakchulchunma-tang) for post-stroke visual impairment. Methods: A 79-year-old male with headache, dizziness, visual field defects, and blurred vision caused by a posterior cerebral infarction was treated with acupuncture and Gami-banhabakchulchunma-tang for three months. We used the Numerical Rating Scale (NRS) for each symptom and measured the patient's eye-movement range. Results: Following treatment, the NRS score for headache decreased from 5 to 0, and for dizziness and blurred vision, it decreased from 5 to 1. The NRS score for visual field defects decreased from 5 to 2. The range of the patient's left and right eye movements both improved, and no adverse side effects were observed during the admission period. Conclusions: Korean medical treatment with acupuncture and herbal medicine (Gami-banhabakchulchunma-tang) could effectively treat post-stoke visual impairment.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.477.1-477
• /
• 2001

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2006년도 추계학술대회 및 정기총회
• /
• pp.57-57
• /
• 2006

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.84-91
• /
• 2002

The shaft with the circular cross section have symmetric structural combination parts to keep the rotating balance. Hence the crack usually emanate from symmetric combination parts due to the stress concentration of these parts. In this study to estimate the fatigue behavior of symmetric cracks, the fatigue test was performed by using rotary bending tester and the specimen with symmetric defects in circular cross section. From the facts the characteristics of crack initiation and propagation on the symmetric surface cracks in circular cross section was examined. Also we observed the internal crack using oxidation coloring and investigated the fatigue behavior using the relationship between surface crack and internal crack. As a result of fatigue lift of symmetric cracks was reduced to 35% compared to single crack’s. We examined the characteristics of fatigue behavior in element with symmetric cracks using internal crack propagation rate and maximum stress intensity factor range obtained from approximation method.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.4137-4140
• /
• 2012

The authors present five cases of combined oral mucosa-mandible defects reconstructed with the vascularized internal oblique-iliac crest myoosseous free flap. This technique has many advantages compared to other conventional methods such as the radial flap, scapula flap, and fibula flap. Vascularized iliac crest flaps provide sufficient high-quality bone suitable for reconstructing segmental madibular defects. Although fibular flaps allow longer donor bone tissue to be harvested, the iliac crest can provide an esthetic shape for mandibular body reconstruction and also provides sufficient bone height for dental implants. Conventional vascularized iliac crest myoosseous flaps have excessive soft tissue bulk for reconstruction of intraoral soft tissue defects. The modification discussed in the present article can reduce soft tissue volume, resulting in better functional reconstruction of the oral mucosa. Another advantage is that complete replacement of the oral mucosa is observed in as early as one month post-operation. The final mucosal texture is much better than that obtained with other skin paddle flaps, which is especially beneficial for the placement of dental implant prostheses. Donor site morbidity looks to be similar to, if not less than that observed for other modalities in terms of function and esthetics. For combined oral mucosa-mandible defects, the vascularized internal oblique-iliac crest myoosseous free flap shows good results with respect to hard and soft tissue reconstruction.

• Journal of Welding and Joining
• /
• 제33권4호
• /
• pp.63-67
• /
• 2015

Non-destructive techniques are used widely in the metal industry in order to control the quality of materials. Eddy current testing(ECT) is one of the most extensively used non-destructive techniques for inspecting electrically conductive materials at very high speeds that does not require any contact between the test piece and the sensor. The New ECT sensor which can detect inner defects was developed regardless the condition of surface. This sensor is verified to do experiment which measure the loss of induced electromotive force. The loss of induced electromotive force was measured in 5.4% and this low frequency ECT device can detect internal defects at depth 20 mm.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.289-294
• /
• 2002

ZnTe films have been grown on (100) GaAs substrate with two representative problems. The one is lattice mismatch, the other is thermal expansion coefficients mismatch of ZnTe /GaAs. It claims here, the relationship of film thickness and defects distribution with (100) ZnTe/GaAs using hot wall epitaxy (HWE) growth was investigated by transmission electron microscopy (TEM). It analyzed on the two-sort side using TEM with cross-sectional transmission electron microscopy (XTEM) and high-resolution electron microscopy (HREM). Investigation into the nature and behavior of dislocations with dependence-thickness in (100) ZnTe/ (100) GaAs hetero-structures grown by transmission electron microscopy (TEM). This defects range from interface to 0.7 $\mu\textrm{m}$ was high density, due to the large lattice mismatch and thermal expansion coefficients. The defects of low density was range 0.7$\mu\textrm{m}$~1.8$\mu\textrm{m}$. In the thicker range than 1.8$\mu\textrm{m}$ was measured hardly defects.

• 소성∙가공
• /
• 제12권6호
• /
• pp.566-571
• /
• 2003

The metal forming behavior and defect formation in Ti-6Al-4V tube during hot backward extrusion were investigated. Dynamic material model(DMM) including Ziegler's instability criterion was employed to predict the forming defects such as shear band, inner and/or surface cracks. This approach was coupled to the internal variables generated from FE analysis. The simulation results fur the backward extrusion were compared with the experimental observation. The chilling effect and friction indicated a great influence on the deformation mode of the tube and the formation of surface cracks. The formation of forming defects in the extruded tube was attributed to non-uniform distribution of strain, strain rate and temperatures in the extruded tubes for the given test conditions.

• Archives of Plastic Surgery
• /
• 제43권5호
• /
• pp.446-450
• /
• 2016

Background Perineal defects are commonly encountered during the treatment of conditions such as malignancy, infectious disease, and trauma. Covering large defects in the perineal area is challenging due to its complicated anatomy and the need for functional preservation. Methods Fourteen patients who underwent reconstructive surgery with multiple perforator flaps for defects >$100cm^2$ in the perineal area were included in this retrospective cohort study. Characteristics of the perforator flap operation and postoperative outcomes were reviewed. Results Reconstruction was performed using 2 perforator flaps for 13 patients and 3 perforator flaps for 1 patient. Internal pudendal artery perforator flaps were mainly used for covering the defects. The average defect size was $176.3{\pm}61.8cm^2$ and the average size of each flap was $95.7{\pm}31.9cm^2$. Six patients had minor complications, such as wound dehiscence and partial necrosis of the flap margin, which were corrected with simple revision procedures. Conclusions Multiple perforator flaps can be used to achieve successful reconstructions of large perineal defects that are difficult to reconstruct with other coverage methods.