• 한국물환경학회지
• /
• 제20권3호
• /
• pp.269-274
• /
• 2004

The performance of a newly designed wastewater treatment process equipped with an anaerobic and two intermittent aeration tanks operated alternately was investigated. During the experimental period, several types of cyclic operating schedules with different aeration and non aeration time were examined for the optimization. At all modes, the removals of organic matter and SS were highly achieved. With respect to T-N removal, however, the cycle length for aeration on/off affected the efficiencies. At the optimal operating mode, the ORP bending point indicating the disappearance of nitrate was observed. Considering the influent wastewater characteristics and cyclic operating schedules, it can be suggested that T-P removal is much more BOD/T-P ratio and/or its load dependant rather than the aeration on/off time. The results obtained from pilot-scale test showed the competitive advantage of this alternating process through an omission of nitrate recycle and operational flexibility against influent load variations when comparing with other continuous flow processes.

• 한국산림과학회지
• /
• 제101권3호
• /
• pp.538-545
• /
• 2012

본 연구는 산림유역의 일시하천과 간헐천이 상존하는 수변지역을 대상으로 산림벌채로 인한 토양의 교란 정도를 평가하고, 물리적 수문학적 특성 변화 양상을 파악하였다. 총 12개 소유역에서 4개의 처리구(BMP1, BMP2, 개벌구, 대조구)를 적용하였으며, 각 처리구별 벌채 전 후 1년 동안의 모니터링 결과를 비교 분석하였다. 그 결과, 벌채 후 산정된 교란등급은 벌채강도와 상관이 있는 것으로 나타났으며, 조사된 토양의 물리적 수문학적 특성 변화와 일치하는 경향을 보였다. 그러나, 용적밀도 및 공극률의 변화와는 일치하지 않았다. 전면개벌은 강도 높은 지표교란을 야기 시켰으며, 이로 인해 조공극률 및 투수계수는 감소, 토양강도는 증가하였고, 이는 토양의 침식의 간접적인 원인으로 작용하였다. 개벌구에서 강도 높은 지표 교란으로 야기된 토양의 물리적 수문학적 특성 변화는 BMP1과 BMP2에서 완화되는 것으로 나타났다. 그러나, 벌채 후 BMP2에 남겨진 벌채잔재물은 지표의 피복기능으로서의 침식을 완화하는 효과가 없는 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.766-775
• /
• 2003

The intermittent spray characteristics of a multi-hole diesel nozzle with a 2-spring nozzle holder were investigated experimentally. Without changing the total orifice exit area, the hole number of the multi-hole nozzle varied from 3 (d$\_$n/=0.42 mm) to 5 (d$\_$n/=0.32 mm). The time-resolved droplet diameters of the spray including the SMD (Saute. mean diameter) and the AMD (arithmetic mean diameter), injected intormittently from the multi-hole nozzles into still ambient ai., were measured by using a 2-D PDPA (phase Doppler particle analyze.). The 5-hole nozzle spray shows the smaller spray cone angle, the decreased SMD distributions and the small difference between the SMD and the AMD, compared with that of the 3-hole nozzle spray. From the SMD distributions with the radial distance, the spray structure can be classified into the three regions : (a) the inner region showing the high SMD distribution , (b) the mixing flow region where the shea. flow structure would be constructed : and (c) the outer region formed through the disintegration processes of the spray inner region and composed of fine droplets. Through the SMD distributions along the spray centerline, it reveals that the SMD decreases rapidly after showing the maximum value in the vicinity of the nozzle tip. The SMD remains the constant value near the Z/d$\_$n/=166 and 156.3 for the 3-hole and 5-hole nozzles, which illustrate that the disintegration processes of the 5-hole nozzle spray proceed more rapidly than that of the 3-hole nozzle spray.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1135-1143
• /
• 2002

The intermittent spray characteristics of the single-hole diesel nozzle (d$\sub$n/=0.32 mm) used in the fuel injection system of heavy-duty diesel engines were experimentally investigated. The mean velocity and turbulent characteristics of the diesel spray injected intermittently into the still ambient were measured by using a 2-D PDPA (phase Doppler particle analyzer) . The gradient of spray half-width linearly increased with time from the start of injection, and it approximated to 0.04 at the end of the injection. The axial mean velocity of the fuel spray measured along the radial direction was similar to that of the free air jet within R/b= 1.0-1.5 regardless of elapsing time, and its non-dimensional distribution corresponds to the theoretical velocity distributions suggested by Hinze in the downstream of the spray flow fields. The turbulent intensity of the axial velocity components measured along the radial direction represented the 20-30% of the U$\sub$cι/ and tended to decrease in the outer region. The turbulent intensity in the trailing edge was higher than that in the leading edge.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.230-240
• /
• 1990

본 연구에서는 원형제트의 천이영역에서 속도신호를 측정하고 이로부터 간헐 도와 간헐주파수를 구하며 이를 사용한 지역평균법으로 난류특성량들을 구하여 천이영 역에서의 난류구조를 해석하고 난류 모델링을 위해 필요한 기초자료를 제공하고자 한 다. 난류강도, 레이놀즈응력, 속도성분의 3차상관 관계등의 레이놀즈평균과 지역평 균들을 제시하였고, 편평도, 비대칭도등의 통계학적인 해석과 확산항에 대한 검토도 행하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.492-499
• /
• 2001

The characteristics of Prand시-Meyer expansion of supersonic flow with condensation along a wavy wall in a channel are investigated by means of experiments and numerical analyses. Experiments are carried out for the case of moist air flow in an intermittent indraft supersonic wind tunnel. The flow fields are visualized by a Schlieren system and the distributions of static pressure along the upper wavy wall are measured by a scanning valve system with pressure transducers. In numerical analyses, the distributions of streamlines, Mach lines, iso-pressure lines, and iso-mass fractions of liquid are obtained by the two-dimensional direct marching method of characteristics. The effects of stagnation temperature, absolute humidity, and attack angle of the upper wavy wall on the generation and the locations of generation and reflection of an oblique shock wave are clarified. Futhermore, it is confirmed that the wavy wall plays an important role in the generation of an oblique shock wave and that the effect of condensation on the flow fields is apparent.

• The Journal of Korean Physical Therapy
• /
• 제16권4호
• /
• pp.179-201
• /
• 2004

The purpose of this study was to determine the effect of application methods in ultrasound on skin temperature and muscle blood flow. Thirty healthy volunteers without known vascular problems participated and randomly divided into three groups such as continuous wave group (CWG) which received a ultrasound treatment of continuous-wave, intermittent wave group (IWG) which received a ultrasound treatment of intermittent-wave at a dosage of $1.5\;W/cm^2$ for a duration of 5 minutes, and placebo group (PG) which received a ultrasound treatment of no-wave and no-dosage ultrasound to the anterior forearm. Blood flow and skin temperature was measured using MP 150 before and after ultrasound administration. The results were as follows : 1. Administration of ultrasound in all groups had increased effect on skeletal muscle blood flow immediately after treatment and for up to 10 minutes posttreatment. 2. CWG and IWG showed increased skin temperature immediately after a ultrasound administration and maintained to 10 minutes posttreatment. PG showed increased skin temperature immediately after a ultrasound administration but returned to initial state to 10 minutes posttreatment. 3. The great change on skeletal muscle blood flow among three groups showed in CWG ($6.27{\pm}1.72$) and then displayed in PG ($5.12{\pm}1.66$) and IWG ($4.61{\pm}2.19$) in order. 4. The vast change on skin temperature among three groups showed in CWG and then IWG and PG in order.

• 멤브레인
• /
• 제14권1호
• /
• pp.75-84
• /
• 2004

폴리아미드계 역삼투 분리막의 투과성능을 비교하기 위하여 NaCl과 NaOCl을 함유하는 혼합용액을 공급수로 사용하여 연속운전과 단속운전 하에서 실험하여 보았다. 이 결과를 가지고 막 이동 모델의 선택적 적용이 가능함을 제시하고자 하였으며 투과 성능 분석 결과, 용액 확산 모델과 선흡착-모세관이동 모델이 운전 모드에 따라 상대적으로 유용함을 볼수 있었다. 연속 운전에서는 선흡착-모세관이동 모델을, 단속 운전에서는 용액 확산 모델을 따름을 알 수 있었다 NaOCl에 의한 표면 변화를 SEM 사진을 통하여 확인 할 수 있었다. 연속운전 후의 막은 염소 투과 결과 표면에서 부분적인 ridge and valley 구조가 나타났으며 단속 운전 후의 막은 표면 전반에서 변성이 일어난 것을 볼 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.267-273
• /
• 2006

Numerical analysis was performed on the enzyme transport and the flow fields in order to predict the effectiveness of urokinase injection regimens in clot dissolution. The species and momentum transport equations were numerically solved for the case of uniform perfusion of enzyme into a fibrin clot for an arterial thrombus and a deep vein thrombus models. In order to predict the thrombus lysis efficiency of continuous and forced intermittent injections, enzyme perfusion and clot lysis were simulated for the different injection velocities. Intermittent injection showed faster clot lysis compared to continuous perfusion, and lysis efficiency was increased as injection velocity increased.

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1128-1146
• /
• 1989

본 논문에서는 2상 횡유동의 진동 메카니즘을 규명하기 위한 실험계획의 일환으로 실시된 실험으로 부터 튜브집합체의 추가질량(hydrodynamic mass)과 감쇠 (damping)에 대해 고찰하였다. 실험은 튜브배열과 피치 대 직경비(pitch-over-di- ameter:.rho./ｄ)가 상이한 튜브집합체에 대해 2상 유체를 모의한 공기-물(air-water) 혼합물에서 수행하였다. 액체상태로부터 99%의 보이드율까지 변화된 2상 유체의 유량은 튜브가 유체탄성 불안정성 (fluidelastic instability)에 도달할 때까지 점진적으로 증가하였다.