• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권5호
• /
• pp.874-887
• /
• 2011

Compared to nomadic and fixed relay stations, vehicle-mounted mobile relay stations show different characteristics caused by the time-variant topology, due to their mobility. Especially, a relay mounted in a vehicle is differentiated from nomadic or fixed relay by the restricted distance between the relay and associated mobile station and the variable density of relay deployment in a cell. In this paper, we identify the characteristics of vehicle-mounted mobile relay stations and provide some parameters that highly influence the performance of vehicle-mounted relay. Through simulation, we measure the effect of relay density, zone ratio, relay transmission power, and frame transmission mode on the performance of vehicle-mounted relay. The results show that the performance of vehicle-mounted relay is highly susceptible to the above vehicle-mounted relay-specific parameters.

• Animal Systematics, Evolution and Diversity
• /
• 제38권4호
• /
• pp.205-213
• /
• 2022

A new free-living marine nematode, Chaetonema longicorpus sp. nov., was discovered in a subtidal benthic habitat around the Uljin nuclear power plant in the East Sea. Chaetonema longicorpus sp. nov. differs from other Chaetonema species in its very long body length, relatively long cephalic setae, long and narrow buccal cavity, bottle-shaped amphideal fovea, short spicules, only one pre-cloacal seta instead of a pre-cloacal supplement, and conspicuous ventral swelling at the middle of the tail. Herein, we provide a taxonomic description and illustrations of this new species using differential interference contrast microscopy. Furthermore, an illustrated pictorial key to all valid species, including the new species and comparative tables on the biogeographical and morphological characteristics of the genus Chaetonema, are provided.

• 환경생물
• /
• 제39권4호
• /
• pp.463-470
• /
• 2021

Admirandus multicavus Belogurov and Belogurova, 1979, a new record of free-living marine nematode species belonging to family Oncholaimidae is reported based on the specimens collected from the intertidal sediments of Korea. Admirandus multicavus is characterized by the following unique characteristics: cephalic setae (1-2 ㎛ long), spicules (71-126 ㎛ long) and gubernaculum (15-31 ㎛ long), midventral preanal supplementary organ, three glandular duct openings of the Demanian system, and stoma length measuring twice the width. A comparative analysis of the biogeographical and ecological characteristics of Admirandus species is presented. DIC (Differential interference contrast) photomicrographs of the species are also provided herein. This report represents the first taxonomic analysis of the genus Admirandus Belogurov and Belogurova, 1979 discovered from the Korean seawaters.

• 한국전자통신학회논문지
• /
• 제8권10호
• /
• pp.1491-1497
• /
• 2013

RFID(Radio Freqeuncy Identification)는 무선통신 기술과 모바일 컴퓨팅 환경이 발전함에 따라 유비쿼터스 컴퓨팅의 중요하고 필수적인 요소로 자리 잡았고, 특정 사물에 대한 빠른 처리나 식별을 돕기 위해 주요하게 사용되고 있다. 일반적으로, 다수개의 태그들이 근접하게 분포되어 있고, 휴대용 RFID 수신기를 사용할 시 각 태그들에 의한 간섭들이 존재하게 된다. 본 논문은 다수개의 태그들이 단일 RFID 리더 인식범위에 동시에 존재할 시 간섭들의 영향을 최소화 할 수 있는 RFID 시스템을 고려한다. 좁은 지역에 많은 태그들이 부착된 물체들이 존재할 수 있는데, 이 경우 다수개의 RFID 태그들은 서로에게 간섭으로 작용할 수 있고, 이로 인해 RFID 시스템의 데이터 신뢰도 및 효율성이 저하될 수 있다. 다수개의 인접한 태그들로 부터의 간섭신호를 억제하기 위해 본 논문은 확산대역 기술을 사용하는 골드코드를 조사, 분석하여 RFID 시스템에 적용시키는 것을 목적으로 한다. 이 RFID 시스템에서 데이터 비트들은 각 태그들에서 고유의 골드코드로 확산되고, 확산된 데이터 비트들은 리더에서 같은 골드코드에 의해 역확산 된다. 고려된 RFID 간섭제거 시스템의 성능분석은 컴퓨터 시뮬레이션을 통하여 확인된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.385-395
• /
• 2009

In this study, a series of numerical analysis has been accomplished on the thermal performance and sectional efficiency of a closed-loop vertical ground heat exchanger (U-loop) in a geothermal heat pump system (GHP) considering the circulating fluid, pipe, grout and soil formation. A finite element analysis program, ABAQUS, was employed to evaluate the temperature distribution on the cross section of the U-loop system involving HDPE pipe/grout/formation and to compare sectional efficiency between the conventional U-loop and a new latticed HDPE pipe system. Especially, the latticed pipe is equipped with a thermal insulation zone in order to reduce thermal interference between the inflow pipe and the outflow pipe. Also, a thermal stress analysis was performed with the aid of ABAQUS. 3-D finite volume analysis program, FLUENT, was adapted to analyze a coupled system between fluid circulation in the pipe and heat transfer and simulate an operating process of the closed-loop vertical ground heat exchanger. In this analysis, the effect of the thermal properties of grout, rate of circulation pump, distance between the inflow pipe and the outflow pipe, and the effectiveness of the latticed HDPE pipe system are taken into account.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.645-667
• /
• 2015

Single treatment and staged treatments in vertical wells are widely applied in sandstone and mudstone thin interbedded (SMTI) reservoir to stimulate the reservoir. The keys and difficulties of stimulating this category of formations are to avoid hydraulic fracture propagating through the interface between shale and sand as well as control the fracture height. In this paper, the cohesive zone method was utilized to build the 3-dimensional fracture dynamic propagation model in shale and sand interbedded formation based on the cohesive damage element. Staged treatments and single treatment were simulated by single fracture propagation model and double fractures propagation model respectively. Study on the changes of fracture vicinity stress field during propagation is to compare and analyze the parameters which influence the interfacial induced stresses between two different fracturing methods. As a result, we can prejudge how difficult it is that the fracture propagates along its height direction. The induced stress increases as the pumping rate increasing and it changes as a parabolic function of the fluid viscosity. The optimized pump rate is $4.8m^3/min$ and fluid viscosity is $0.1Pa{\cdot}s$ to avoid the over extending of hydraulic fracture in height direction. The simulation outcomes were applied in the field to optimize the treatment parameters and the staged treatments was suggested to get a better production than single treatment.

• 한국습지학회지
• /
• 제19권2호
• /
• pp.193-201
• /
• 2017

본 연구는 습지가 크게 부족한 우리나라의 현실에서 습지 복원에 요구되는 기초 생태 정보를 얻기 위해 수행되었다. 이러한 목적을 이루기 위해 본 연구에서는 비교적 온전한 둠벙을 유지하고 있는 충북 괴산 일원의 둠벙을 대상으로 습지 복원을 위한 기초생태정보를 수집하였다. 둠벙에 성립한 식생 중 인위적 간섭으로 성립한 식생을 제외하고 자연적으로 성립한 식생을 대상으로 식생의 수평적 분포를 종합하면, 수역에는 개구리밥군락, 마름군락, 가래군락, 보풀군락, 긴흑삼릉군락 및 송이고랭이군락, 수변에는 고마리군락, 골풀군락, 여뀌바늘군락, 환삼덩굴군락, 큰개여뀌군락, 물억새군락, 달뿌리풀-갈대군락 및 도루박이군락, 지하수위가 중간 정도인 관목식생대에는 찔레꽃군락, 조팝나무군락 및 갯버들군락, 지하수위가 높은 곳에 성립한 교목 및 아교목식생대에는 신나무군락과 버드나무군락이 성립하는 경향이었다. 수집한 식생정보에 기초하여 서열화한 결과, 수생식물 우점 식분, 습생대식물 우점 식분 및 수변식물 우점 식분으로 대별되는 경향이었다. 이러한 식분을 이루는 주요 식물군락의 생태적 위치와 종 조성을 생태연못을 조성하기 위한 대조생태정보로 제시하였다. 나아가 습지가 발휘하는 기능을 통해 그것의 중요성과 복원의 필요성을 논의하였다.

• 도시과학
• /
• 제6권2호
• /
• pp.29-34
• /
• 2017

Although the supply of public parking lots in major cities is steadily increasing, there is still a shortage of parking spaces that take into account the characteristics of actual available parking spaces. These parking problems are caused by conflicts between users, illegal occupation and privatization of roads, interference with traffic roads, and business stagnation in commercial areas and illegal parking problems. In addition, despite various parking demand management policies and continuous supply of public parking facilities, the solution to the parking problem is uneasy due to increased construction costs and changes in social conditions. In order to solve this problem, it was judged that it would be necessary to utilize the existing public parking lots efficiently. Therefore, we collect the variables expected to affect the turnover, and use multiple regression models. The results are summarized as follows. Firstly, public parking lots can be classified into four types using utilization rate and turnover rate. Secondly, influencing factors are found including index of public transportation usage convenience, index of illegal parking, and land use characteristics in central commercial district. Thirdly, it was shown that there was little impact by the size of public parking lots, separation distance to subway distance, separation distance to bus stops, transfer zone, residential zone, and second-rated lots by parking costs. Finally, it is found that public parking lots can be improved by proving accessibility of public transit, enforcement of illegal parking, active approaches supporting public parking lots. It is also recommended that public parking cost rating system based mainly on land use characteristics should be remedied and rearranged.

• 소성∙가공
• /
• 제16권7호
• /
• pp.530-537
• /
• 2007

This paper is concerned with the analysis of plastic deformation of bimetal co-extrusion process. Two sets of material combination have been adopted for analysis, i.e. combinations of Cu/Al and Fe/Al. In the first set of material combination, the selected materials are AA 1100 aluminum alloy as hard material and CDA 110 as soft one. This type of material selection is to examine the effect of hard core and soft sleeve and vice versa on the deformation pattern in terms of plastic zone and velocity discontinuity along the contact surface between construction materials. Four different cases of co-extrusion process in terms of material combination and interference bonding were simulated to investigate the effect of material arrangement between core and sleeve, and of bonding on the plastic zones and velocity discontinuity. In the other set of material combination, model materials used as core and sleeve were AA 1100 and AISI 1010, which are relatively soft and hard, respectively. Process parameters except diameter ratio of core to sleeve material such as semi-die angle, reduction in area in global sense and die comer radius have been set constant throughout the simulation to concentrate our effort on the analysis of influence of diameter ratio on deformation behavior such as deformation zone, surface expansion, exit velocity discontinuity between composite materials, and extrusion forces.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.31-45
• /
• 2018

This study investigated the characteristics of sedimentary environment changes across a tidal flat in Gagyeongju of Anmyeondo Island. We performed a spatio-temporal analysis on the grain sizes composition of sediments and micro-landform changes during the winter from 2013 to 2016. The results showed that erosion was a dominant processthroughout the study flat, reducing the surface elevation even by 1 m around the upper sand flat. As a consequence, headlands have formed in the entire region of Gagyeongju village. In addition, erosion quickly progressed along the low-lying subtidal zone and tide way and, in contrast, sedimentation progressed in the mid-elevation tidal flat. We posit that a jetty, which had been constructed as a pier facility on the eastern part of the study area, interfered with the flow of tidal current, thereby enhancing these erosional processes. This is because such interference can block the supply of fine-textured sediments from the nearby Cheonsu Bay and therefore reduce surface elevation. According to the surface sediment analysis, the sediments were categorized into 7 sedimentary facies, and generally displayed a high ratio of silt and clay. The result of time-series analysis (2012-2013) showed that the sediments on the tidal flat became fine-grained, and that sorting became worse. However, the sediments on the subtidal zone, embayment and along inside of the jetty tended to be coarse-grained. In conclusion, the tidal flat microlandform change in the study area was caused by a disruption in the seawater circulation due to the jittery construction within the tidal flat, which had a direct effect on erosional and sedimentary environment processes.