• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.11
• /
• pp.831-837
• /
• 2003

This paper investigates the insertion loss of nosie barrier with a interference device, The efficiency of the conventional interference-type noise barrier depends on specific frequency, Thus this study is performed to improve the efficiency of the nosie barrierin the range of broadband frequency. by changing the shape of interference device and adding the channel with various depths, The boundary element method (BEM) is used to predict the insertion loss of noise barrier. Two-dimensional boundary element model is created to simulate the performance of long barrier with a line source.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.749-754
• /
• 2002

This paper investigates the insertion loss of nosie barrier with a interference device. The efficiency of the conventional interference-type noise barrier depends on specific frequency. Thus this study is performed to improve the efficiency of the nosie barrier in the range of broadband frequency, by changing the shape of interference device and adding the channel with various depths. The boundary element method (BEM) is used to predict the insertion loss of noise barrier. Two-dimensional boundary element model is created to simulate the performance of long barrier with a line source.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1474-1482
• /
• 1994

In order to study the influence of a circular inclusion on a stress field neat a crack tip, mutual interference of a crack and the circular inclusion is analyzed by using the two dimensional boundary element method program made for the analysis of a bimaterial inclusion. The stress intensity factor of an inclusion which has small stiffness is a little greater than that of large stiffness in the near-by crack tip, and similar values tends to appear for distant crack tips. A line crack shows the repetition phenomena which caused by stress mutual interference depending on the radius and stiffness of an inclusion, and the repetition phenomena becoms weak in the inclusion which has large stiffness. Stress mutual interference shows repetition phenomena after extension of a line crack by the length of the radius of the inclusion which has small stiffness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.895-902
• /
• 1999

This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seals for oscillating shafts when the sealing interference and band width between the lip ease or contact seals and the shaft are present. Using the finite element method the contact stress and band width of scraper seals are analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, ole maximum contact stress of the dust lip, which is used to exclude foreign contaminants is six times higher than that of the primary sealing lip, which is used to contain lubricants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1615-1622
• /
• 2002

The purpose of this study is comparing cold expansion method with interference fit. Cold expansion method and interference fit of fastener hole is using in the aerospace industry. These treatment lead to an improvement of fatigue life to the compressive residual stresses developed on the hole surface. But Research is nothing to about difference effect of between cold expansion method and interference fit. So, this paper, it is shown that Comparing cold expansion method with interference fit using the finite element method. It is further shown that residual stress distribution according to plate thickness and clamping force.

• Journal of KSNVE
• /
• v.10 no.3
• /
• pp.517-522
• /
• 2000

This study is concerned with the acoustic characteristics for recently developed interference-type noise barrier (T-shaped). To modify the previous shape more conveniently the T-shaped noise barrier with tuning partitions was examined in detail by varying the number and the hight of tuning partitions. The 2-D boundary element method(BEM) analysis were compared with the experimental results of 1/10 reduced scale model.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.3 no.2
• /
• pp.85-104
• /
• 2016

Stability and loosening of implanted femoral stems in Total Hip Replacement have been well established as barriers to the primary concerns of osseointegration and long term implant survival. In-vitro experiments and finite element modeling have for years been used as a primary tool to assess the bone stem interface with variable methodologies leading to a wide range of micromotion, interference fit and stress shielding values in the literature. The current study aims to provide a comprehensive review of currently utilized methodologies for in-vitro mechanical testing as well as finite element modeling of both micromotion and interference of implanted femoral stems. A total of 12 studies detailed in 33 articles were selected for inclusion. Experimental values of micromotion ranged from 12 to $182{\mu}m$ while finite element analysis reported a wider range from 2.74 to $1,277{\mu}m$. Only two studies were found that modeled bone/implant contact with consideration for interference fit. In studies evaluating stem micromotion in THA, the reference surface at the bone/stem interface should be well defined. Additionally, the amount of penetration considered should be disclosed and associated with bone density and roughness.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.75-79
• /
• 2009

A four beam interference optical system for laser micro structuring using a pulse laser was demonstrated. The four beam interference optical system using a pulse laser(picosecond laser) can fabricate micro structure on mold material(NAK80) directly. Micro structure on the polymer can be reproduced economically by injection molding of the micro structure on the mold material. The four beam interference optical system was composed by the DOE(Diffractive Optical Element) and two lenses. The laser intensity distribution of four beam interference was explained by an interference optics point of view and by the image optics point of view. We revealed that both views showed the same result. The laser power distribution of a $1{\mu}m$ peak pattern was made by the four beam interference optical system and measured by the objective lens and CCD. A $1{\mu}m$ pitch dot pattern on the mold material was fabricated and measured by SEM(Scanning Electron Microscopy).

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.419-424
• /
• 2001

The purpose of this study is comparing cold expansion method with interference fit. Cold expansion method and interference fit of fastener hole is using in the aerospace industry. These treatment lead to an improvement of fatigue life to the compressive residual stresses developed on the hole surface. But Research is nothing to about difference effect of between cold expansion method and interference fit. So In this paper, It is shown that Comparing cold expansion method with interference fit. and It is further shown that residual stress distribution according to plate thickness.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.52-59
• /
• 2004

This paper shows about the machine simulation embodiment when it happens NC equipment and between workpiece and interference in 5 axises machining of aluminium alloy a vehicles parts. And this research has been chosen because of the highest equipment interference occurrence rate at a vehicles parts processing of 5 axises horizontal machine. It can verify simulation and machining process through correlation of their dynamic relations, interference, collision as embodied virtual manufacturing system of machine, workpiece, and holder etc. That is necessary element in shape of machine tool, function and processing in imagination ball. Also, it verifies about interference and collision between NC equipment and workpiece, as it applied machine simulation to NC Data of actuality aircraft parts of BULKHEAD and FRAME. As the result of this study, by removing the equipment interference and collision element which creates NC data, the virtual machine tool it the efficiency of machine process has increased.