• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.47-75
• /
• 2011

An accurate substructural synthesis method including random responses synthesis, frequency-response functions synthesis and mid-order modes synthesis is developed based on rigorous substructure description, dynamic condensation and coupling. An entire structure can firstly be divided into several substructures according to different functions, geometric and dynamic characteristics. Substructural displacements are expressed exactly by retained mid-order fixed-interfacial normal modes and residual constraint modes. Substructural interfacial degree-of-freedoms are eliminated by interfacial displacements compatibility and forces equilibrium between adjacent substructures. Then substructural mode vibration equations are coupled to form an exact-condensed synthesized structure equation, from which structural mid-order modes are calculated accurately. Furthermore, substructural frequency-response function equations are coupled to yield an exact-condensed synthesized structure vibration equation in frequency domain, from which the generalized structural frequency-response functions are obtained. Substructural frequency-response functions are calculated separately by using the generalized frequency-response functions, which can be assembled into an entire-structural frequency-response function matrix. Substructural power spectral density functions are expressed by the exact-synthesized substructural frequency-response functions, and substructural random responses such as correlation functions and mean-square responses can be calculated separately. The accuracy and capacity of the proposed substructure synthesis method is verified by numerical examples.

• 대한환경공학회지
• /
• 제35권1호
• /
• pp.70-73
• /
• 2013

토양정화를 위한 토양 세정 및 세척 공정에서 계면활성제 선택 기준과 가장 중요한 설계인자는 오염물질의 용해도이다. 계면활성제의 오염물질 용해도는 오염물질과 평형상태를 만든 후 Dichrolomethane을 이용한 추출, 증발, 농축 등의 전처리과정을 거쳐야 한다. 따라서 계면활성제 용액 내 유류 오염 물질의 용해도 분석은 많은 시간과 재료를 필요로 한다. 계면장력은 계면활성제용액과 유류오염물질 사이에 유지되는 힘을 지칭하는 것으로 용해도와 밀접한 관계를 가진다. 본 연구는 계면활성제용액과 경유 간 계면장력과 용해도를 측정하여 계면장력과 용해도간 상관관계를 정립하므로 신속한 계면 장력 측정을 통한 용해도를 가늠할 수 있는 방안을 제시하였다. 계면장력과 유류용해도간 상관관계를 평가한 결과 두 특성은 기하급수적인 반비례관계를 보였다. 즉, 계면장력이 5 dyne/cm 이상조건에서 경유의 용해도는 크게 차이를 보이지 않다가 1 dyne/cm 이하에서 경유의 용해도는 급격하게 증가하였다. 앞으로 계면활성제용액 간 계면장력을 우선적으로 측정해 본다면 토양정화에 적합한 계면활성제 종류 및 농도를 매우 신속하고 효율적으로 선택할 수 있을 것으로 판단된다.

• Elastomers and Composites
• /
• 제37권4호
• /
• pp.258-264
• /
• 2002

본 연구에서는 열처리에 의한 실리카의 표면특성과 실리카/폴리우레탄 복합재료의 기계적 계면물성에 대하여 고찰하였다. 열처리에 의한 실리카의 표면특성은 Fourier Transform-IR(FT-IR), Solid-state 29Si NMR spectroscopy, 그리고 접촉각을 통하여 알아보았으며 실리카/폴리우레탄 복합재료의 기계적 계면물성은 인열에너지 (GIIIC)를 측정하여 관찰하였다. 본 실험결과, 열처리 온도가 증가함에 따라 실리카의 Si-OH가 축합하여 Si-O-Si를 형성하고 표면자유에너지의 비극성 요소가 증가하는 것을 확인할 수 있었다. 이러한 결과로부터, 증가된 실리카의 표면자유에너지의 비극성요소는 폴리우레탄 내에 실리카의 분산성을 향상시켜 결과적으로 실리카/폴리우레탄 복합재료의 기계적 계면물성인 인열에너지가 증가된 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.267-283
• /
• 2015

The main objective of this study is to investigate experimentally the two-phase flow characteristics in terms of the direct contact condensation of a steam-water stratified flow in a horizontal rectangular channel. Experiments were performed for both air-water and steam-water flows with a cocurrent flow configuration. This work presents the local temperature and velocity distributions in a water layer as well as the interfacial characteristics of both condensing and noncondensing fluid flows. The gas superficial velocity varied from 1.2 m/s to 2.0 m/s for air and from 1.2 m/s to 2.8 m/s for steam under a fixed inlet water superficial velocity of 0.025 m/s. Some advanced measurement methods have been applied to measure the local characteristics of the water layer thickness, temperature, and velocity fields in a horizontal stratified flow. The instantaneous velocity and temperature fields inside the water layer were measured using laser-induced fluorescence and particle image velocimetry, respectively. In addition, the water layer thickness was measured through an ultrasonic method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.115-115
• /
• 1999

To demonstrate the applicability of RELAP5 to the prediction of the onset offlooding in the hot leg at the reflux condensation phase during mid-loop operation, numerical analysis is performed for the counter-current flow in a horizontal pipe with the inclined riser using the RELAP5/MOD3.2.2b code. It is found that the RELAP5, simulating the CCFL phenomena using interfacial friction along with the flow regime map in the horizontal pipe, produces unsatisfactory results. Under the CCFL condition, it is observed that large oscillation exists in the flow rate, void fraction, and etc. and the liquid flow rate is much lower than that predicted by the CCFL model measured in the experiment. The CCFL model of RELAP5 for the vertical volume is extended to the model for the horizontal and inclined volumes. The horizontal volume flow regime map and interfacial friction model coupled to the CCFL model are modified. And a new correlation developed from Kang's experiment is implemented to the CCFL model of RELAP5. With this modified RELAP5, the analysis of CCFL phenomena in the horizontal pipe and hot leg geometry is performed, and produces reasonable results in comparison with experimental data.

• 폴리머
• /
• 제38권6호
• /
• pp.791-800
• /
• 2014

Friedel-Crafts 직접 아실화 반응을 이용하여 $P_2O_5$/폴리인산 매질에서 다중벽 탄소나노튜브(MWNT)와 4-클로로벤조산(CBA)을 반응시켜 클로로벤조일(CB)기가 도입된 MWNT(c-MWNT)를 제조하였다. 이때 반응시키는 CBA양을 조절하여 염소원자 함량이 최대 5.3 wt%(CB기 함량 20.86 wt%)인 c-MWNT를 얻었다. 한편, 열가소성 엔지니어링 플라스틱 소재인 폴리(페닐렌 설파이드) (PPS)와 MWNT의 계면접착력을 증가시키기 위하여, 4-클로로벤젠티올(CBT)의 자기축합에 의한 PPS 중합시 c-MWNT를 함께 넣고 중합시킨 후 호모 PPS를 제거하여 MWNT-g-PPS를 얻었다. 이 MWNT-g-PPS의 열 및 표면 특성들을 분석하였으며, c-MWNT와 CBT가 반응하여 c-MWNT 표면에 PPS가 생성되었음을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2113-2118
• /
• 2007

In this study, a mathematical model for a thermal analysis of a flat heat pipe with a grooved wick structure is presented. The effects of the liquid-vapor interfacial shear stress, the contact angle, and the amount of liquid charge have been included in the proposed model. In particular, the axial variations of the wall temperature and the evaporation/condensation rates are considered by solving the one-dimensional conduction and the augmented Young-Laplace equations, respectively. In order to verify the model, the results obtained from the model are compared to existing experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.95-98
• /
• 2007

A general purpose program NUFLEX has been extended for two-phase flows with topologically complex interface and cavitation flows with liquid-vapor phase change caused by large pressure drop. In analysis of two-phase flow, the phase interfaces are tracked by employing a LS(Level Set) method. Compared with the VOF(Volume-of-Fluid} method based on a non-smooth volume-fraction function, the LS method can calculate an interfacial curvature more accurately by using a smooth distance function. Also, it is quite straightforward to implement for 3-D irregular meshes compared with the VOF method requiring much more complicated geometric calculations. Also, the cavitation process is computed by including the effects of evaporation and condensation for bubble formation and collapse as well as turbulence in flows. The volume-faction and continuity equations are adapted for cavitation models with phase change. The LS and cavitation formulation are implemented into a general purpose program for 3-D flows and verified through several test problems.

• 대한설비공학회지:설비저널
• /
• 제17권5호
• /
• pp.583-589
• /
• 1988

Condensation of water vapor into an absorbent liquid of LiBr-water solution falling over a bank of water cooled horizontal tubes was investigated theoretically. The governing conservation equation for a re-defined physical transport phenomena were solved numerically using a finite difference method. Raw parameters were used in this study, since reliable experimental data is required prior to a dimensionless parametric study. The average values of wall heat transfer coefficient and interfacial absorption rate were defined to see the system performance. Other parameters include tube diameter, streamwise coordinate (and number of tubes in row), mass flow rate, and the wall temperature. The effects of these quantities on the absorption processes and suggestions for a rational system design have been presented.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.677-683
• /
• 1990

Melt-textured growth of the YBa2Cu3O7-x phase from a supercooled melt created locally aligned, barshaped grains of the orthorhombic 1-2-3 phase. Based on all the observed phenomena, the gross mechanism of the melt-textrued growth of YBa2Cu3O7-x on the (100) plane of MgO was delineated by three basic patterns of reactions. These are : (ⅰ) formation of the aligned 1-2-3 phase and the Y-rich 2-1-1 phase at the bulk region away from the (100) plane of MgO ; (ⅱ) formation of the Cu-richprecipitates at the interfacial region by the selective interface-induced precipitation of the liquid phase ; (ⅲ) condensation reaction of the entrapped Cu-rich vapor with Mg atoms during the initial stage of rapid cooling from 130$0^{\circ}C$ to 98$0^{\circ}C$.