• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.822-829
• /
• 2009

A reader protocol is an interface between a host and RFID readers. There are several standards for reader protocol such as EPCglobal Low Level Reader Protocol (LLRP) 1.0.1, EPCglobal Reader Protocol (RP) 1.1, and ISO/IEC 15961/15962. Unfortunately, these standards focus on the passive RFID system, and so they are not appropriate for the active RFID system. In this paper, we implemented an efficient reader protocol for the active RFID system, which is based on EPCglobal LLRP 1.0.1, but smoothing/filtering functions of EPCglobal RP 1.1 are added. This protocol is designed to configure air interface parameters for active RFID readers and tags. It can reduce the amount of data transfer between the reader and host by filtering function, and can improve the performance of tag collection by smoothing function. In addition, it can remove inefficiency caused by tag memory data change according to the standards of ISO/IEC 15961/15962. In the real-world environment, we evaluated the performance of our implemented reader protocol using one RFID reader and 45 tags.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1129-1132
• /
• 1999

This paper deals with the design and implementation of an Ethernet-based communication protocol to be used in PC-based I/O interface systems. Recently, the performance of PC systems is being highly improved and Ethernet is used as the stable communication network over the world. We develop a new protocol driver with the capability of accessing Ethernet directly using NDIS(Network Driver Interface Specification), the network interface standard of Windows O.S. in PC, and install it at the application layer of the protocol structure. Its major roles are the supplement of CSMA/CD algorithm, the effective use of the long data frame of Ethernet, and the real-time transmission of data frames. This paper represents the possibility of the real-time control network and systems based on PCs and Ethernet.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.677-685
• /
• 2012

Recently, wireless multi-networking technology has been studied for supporting multi-interface in mobile node. As the related work, in the IETF NetExt WG, the extension of Proxy Mobile IPv6 protocol for supporting flow mobility is actively on going in discussion. PMIPv6 protocol supports simultaneous access through the multi-interface in a mobile node and inter-technology handover between multiple interfaces. However, this protocol can not support flow mobility. Thus, in this paper, when a mobile node connects to PMIPv6 domain through multi-interface, as a way to support flow mobility, the design of logical interface and Home Network Prefix change scheme based on logical interface are proposed, We show that the proposed scheme can perform flow mobility service without end-to-end disconnection in PMIPv6 domain.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.2
• /
• pp.33-37
• /
• 2008

To keep the online medical records available to anyone without constraint of time and space, introducing EMR (Electronic medical record), which is a clinical support management system. The purpose of this study is to develop interface standard of clinical test device. Integration and sharing of medical information is faced with enormous obstacles because medical organizations and associated companies are separately developing the interface. I hope that multi-function management system with workstation concept is operated to efficiently transmit clinical device result data based on this study. Transfer of precise medical result data available for decision making will improve quality of health care service.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.101-101
• /
• 2000

MSC(Multispectral Camera), which will be a unique payload on KOMPSAT-II, is designed to collect panchromatic and multi-spectral imagery with a ground sample distance of 1m and a swath width of 15km at 685km altitude in sun-synchronous orbit. The instrument is designed to have an orbit operation duty cycle of 20% over the mission life time of 3 years. MSC electronics consists of three main subsystems; PMU(Payload Management Unit), CEU(Camera Electronics Unit) and PDTS(Payload Data Transmission Subsystem). PMU performs all the interface between spacecraft and MSC, and manages all the other subsystems by sending commands to them and receiving telemetry from them with software protocol through RS-422 interface. CEU controls FPA(Focal Plane Assembly) which contains TDI(Timc Delay Integration) CCD(Charge Coupled Device) and its clock drivers. PMU provides a Master Clock to synchronize panchromatic and multispectral camera. PDTS performs compression, storage and encryption of image data and transmits them to the ground station through x-band.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.756-764
• /
• 2002

The verification portion of SoC design consumes about 70% of total design effort. To reduce the verification effort and time, it is necessary and desirable to raise the level of SoC design verifications level from the signal or cycle level to the transaction. This paper describes a generation method of transaction monitor modules that monitor interface signals, logging the transaction executions, and report transaction errors. The input of the generation method is a transaction-oriented interface protocol description.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.3
• /
• pp.86-92
• /
• 2000

In this paper, we develop protocol analyzer that can analyze and monitor LAN(Local Area Network)-based TCP/IP protocol using the OOP(object-oriented programming) in Windows98/NT environment. TCP/IP(Transmission Control Protocol/Internet Protocol) protocol analyzer is consist of interface hardware, protocol analysis software and GUI(Graphic User Interface). It is designed for the real-time analysis using the real-time object. In results of Performance test, TCP/IP Protocol analyzer is showed that it can analyze and monitor without frame error in LAN-based. Also, developed protocol analyser operates better than conventional protocol analyzer in performance. It can be used in maintenance fields of communication and network.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.390-395
• /
• 1988

The implementation of MAP(Manufacturing Automation Protocol) NIU(network interface uint) is studied and presented in this paper. Hardwares and system softwares for network management, user interface, and medium access control are developed. Also LLC(Logical Link Control) protocol is implemented. Afterwards, The operations of NIU using self-test functions are tested. Compatibility between interfaces according to IEEE 802.4 standard is also tested.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.93-93
• /
• 2000

In this study, physical and data link layer protocols of FOUNDATION Fieldbus are implemented. INTEL386EX and 80196KC are used fer the CPU of PC interface board and sensor interface module, respectively The physical layer protocol of FOUNDATION Fieldbus is developed by using FB3050 chip, the fieldbus communication controller ASIC. The data Link layer protocol of FOUNDATION Fieldbus is implemented by software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10A
• /
• pp.1717-1726
• /
• 2001

본 논문에서는 CORBA(Common Object Request Architecture)기반의 TINA(Telecommunications Information Networking Architecture) 분산체계에서 통신망 하부 장비들이 SNMP(Simple Network Management Protocol) 혹은 TMN(Telecommunications Management Network) 체계로 혼재되어 관리되는 네트워크의 NE(Network Element)들을 효율적으로 통합 관리할 수 있는 Generic Interface Adaptor(GIA)를 제안하고 이를 설계 및 구현하였다. GIA는 message mapping, protocol conversion 및 DBMS를 이용한 Object Abstract Translation(OAT)을 통해서 각 관리체계에 맞도록 관리정보를 변환시키며, 이를 통해 TINA EML(Element Management Layer) component와 SNMP NE agent 간의 상호연동을 가능하게 한다.