• Steel and Composite Structures
• /
• 제4권2호
• /
• pp.133-147
• /
• 2004

This paper deals with the asymptotic analysis of Mohr-Coulomb and Drucker-Prager soft thin layers bonded with elastic solids. In the first part, a mathematical analysis shows how to obtain an interface law that replaces mechanically and geometrically the thin layer. This law is strongly non-linear and couples microscopic and macroscopic scales. In the second part of the paper, the microscopic terms are quantified numerically, and it is shown that they can be neglected.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.573-599
• /
• 2014

A new type of connection for steel-concrete composite bridges was developed by the Steel Structures Laboratory of Ecole Poytechinque $F{\acute{e}}d{\acute{e}}rale$ de Lausanne. Resistance to longitudinal shear is based on the development of shear stresses in the confined interfaces which form the connection. Confinement is provided by the reinforced concrete slab which encloses the connection and restrains the uplift (lateral separation) of the interfaces by developing normal stresses. The experimental investigation of the interfaces, under static and cyclic loading, enabled the development of the laws describing the structural behaviour of each interface. Those laws were presented by the authors in previous papers. The current paper focuses on the continuity of the research. It presents the experimental investigation on the new connection by means of push-out tests on specimens submitted to static and cyclic shear loading. Investigation revealed that the damage in the connection, due to cyclic loading, is expressed by the accumulation of a residual slip. A safe fatigue failure criterion is proposed for the connection which enabled the verification of the connection for the fatigue limit state with respect to the limit of fatigue. A numerical model is developed which takes into account the laws describing the interface behaviour and the analytical expressions for the confinement effect, the latter obtained by performing finite element analysis. This numerical model predicts the shear resistance of the connection and enables to assess its fatigue limit which is necessary for the fatigue design proposed.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권3호
• /
• pp.211-236
• /
• 2019

This paper is devoted to the study and investigation of the Runge-Kutta discontinuous Galerkin method for a system of differential equations consisting of two hyperbolic conservation laws. The numerical coupling flux which is used at a given interface (x = 0) is the upwind flux. Moreover, in the linear case, we derive optimal convergence rates in the $L_2$-norm, showing an error estimate of order ${\mathcal{O}}(h^{k+1})$ in domains where the exact solution is smooth; here h is the mesh width and k is the degree of the (orthogonal Legendre) polynomial functions spanning the finite element subspace. The underlying temporal discretization scheme in time is the third-order total variation diminishing Runge-Kutta scheme. We justify the advantages of the Runge-Kutta discontinuous Galerkin method in a series of numerical examples.

• Multiscale and Multiphysics Mechanics
• /
• 제1권1호
• /
• pp.35-51
• /
• 2016

In this paper, a mixed-mode cohesive law for an interface crack between epoxy and TR (transparent thermoplastic) resin is inversely estimated by the field projection method using numerical solutions and experimentally measured displacements. Displacements in a region far away from the crack tip are measured by digital image correlation technique. An inverse analysis, the field projection method formulated from the interaction J- and M-integrals with numerical auxiliary fields, is carried out to estimate a mixed-mode cohesive law for an interface crack between dissimilar materials. In the present approach, nonlinear deformations and damage near the crack tip are converted into the relationships of tractions and separations on crack surfaces behind the crack tip. The phase angle of mixed-mode singularities of the interface crack is also obtained from measured displacements in this study.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.347-360
• /
• 2018

The aim of this paper is to evaluate the accuracy and reliability of the available bond-slip laws which are being used for the numerical modeling of Fiber Reinforced Polymer (FRP)/concrete interfaces. For this purpose, a set of Reinforced Concrete (RC) beams retrofitted with external FRP were modeled using the 3D nonlinear Finite Element (FE) approach. All considered RC beams have been previously tested and the corresponding experimental data are available in the literature. The failure modes of these beams are concrete crushing, steel yielding and FRP debonding. Through comparison of the numerical and experimental results, the effectiveness of each FRP/concrete bond-slip model for the prediction of the structural behavior of externally retrofitted RC beams is assessed. The sensitivity of the numerical results against different modeling considerations of the concrete constitutive behavior and bond-slip laws has also been evaluated. The results show that the maximum allowable stress of FRP/concrete interface has an important role in the accurate prediction of the FRP debonding failure.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.1053-1064
• /
• 2005

The mechanical damage of concrete is normally attributed to the formation of microcracks and their propagation and coalescence into macroscopic cracks. This physical degradation is caused from progressive and hierarchical damage of the microstructure due to debonding and slip along bimaterial interfaces at the mesoscale. Their growth and coalescence leads to initiation of hairline discrete cracks at the mesoscale. Eventually, single or multiple major discrete cracks develop at the macroscale. In this paper, from this conceptual model of mechanical damage in concrete, the computational efforts were made in order to characterize physical cracks and how to quantify the damage of concrete materials within the laws of thermodynamics with the aid of interface element in traditional finite element methodology. One dimensional effective traction/jump constitutive interface law is introduced in order to accommodate the normal opening and tangential slips on the interfaces between different materials(adhesion) or similar materials(cohesion) in two and three dimensional problems. Mode I failure and mixed mode failure of various geometries and boundary conditions are discussed in the sense of crack propagation and their spent of fracture energy under monotonic displacement control.

• Structural Engineering and Mechanics
• /
• 제10권2호
• /
• pp.125-138
• /
• 2000

The paper analyzes the problem of torsion in an adhesive non-tubular bonded single-lap joint. The joint considered consists of two thin rectangular section beams bonded together along a side surface. Assuming the materials involved to be governed by linear elastic laws, equilibrium and compatibility equations were used to arrive at an integro-differential relation whose solution makes it possible to determine torsional moment section by section in the bonded joint between the two beams. This is then used to determine the predominant stress and strain field at the beam-adhesive interface (stress field along the direction perpendicular to the interface plane, equivalent to the applied torsional moment and the corresponding strain field) and the joint's elastic strain (absolute and relative rotations of the bonded beam cross sections). All the relations presented were obtained in closed form. Results obtained theoretically are compared with those given by a three dimensional finite element numerical model. Theoretical and numerical analysis agree satisfactorily.

• 한국전산구조공학회논문집
• /
• 제31권3호
• /
• pp.121-125
• /
• 2018

본 연구에서는 굴곡 계면을 따른 균열 진전을 응집 요소를 사용하여 유한요소 해석을 수행하였고 균열 선단에서 복합 모드 하중을 고려하기 위하여 BK 법칙을 적용하였다. 정현파 굴곡 계면을 갖는 이중 외팔보에 하중을 부여하고 복합 모드 응집 법칙에서 응집 강도와 응집 에너지에 따른 하중-변위 선도의 변화를 알아보았다. 응집 강도가 커지면 응집 영역 크기가 상대적으로 작아지고 균열 진전에 따른 하중-변위 선도에 굴곡이 나타나는 것을 보여 주었으며 인장과 전단 응집에너지 비율에 따라 하중의 증가와 하중-변위 선도에 굴곡이 나타나는 것을 보여주었다. 또한 굴곡 계면의 형상에 따른 균열 진전 거동의 영향을 분석하였는데 균열의 형상비가 커지면 균열 진전을 위한 더 큰 균열 분리 에너지가 요구되는 것을 보여 주었다. 굴곡 계면의 형상과 응집 법칙을 변화시켜 파괴 인성을 크게 향상시킬 수 있으며 균열 진전 거동을 변화시킬 수 있게 된다.

• Journal of Platform Technology
• /
• 제12권1호
• /
• pp.141-150
• /
• 2024

개인정보보호는 국내외를 막론하고 그 중요성이 더욱 강조되고 있으며, 국외에서는 관련정책과 동적 관리 기술을 다양하게 적용하고 있지만 우리나라에서는 법령 준수와 기술 적용 간의 일부 괴리가 존재하며, 정보주체의 개인정보 처리정지를 편리하게 제공하는 사용자 인터페이스가 거의 없는 상황이다. 본 연구에서는 먼저 개인정보 동의 동적 관리 기술의 필요성과 관련 산업의 실태 그리고 발전 가능성을 전망한다. 다음으로 국내 개인정보보호 법령을 엄격히 준수하면서도 정보주체의 개인정보 자기결정권을 최대한 보장하는 개인정보 동의 동적 관리 기본 모델을 제시하였다. 특히, 개인정보 처리정지와 관련된 국내 법령상 근거와 개인정보 동의 동적 관리 인터페이스 기본 모델을 설계하고, 그 효과성을 분석하여 제시한다. 본 연구의 결과를 통해서 제안된 개인정보 이용 동의에 대한 동적관리 모델은 앞으로 다양한 웹사이트 및 애플리케이션 등에 다각적으로 활용될 수 있을 것으로 예상한다.

• 대한의용생체공학회:의공학회지
• /
• 제35권3호
• /
• pp.50-54
• /
• 2014

It is being tried to control robot arm using brain signal in the field of brain-machine interface (BMI). This study is focused on applying guidance laws for efficient robot arm control using 3D coordinates obtained from Magnetoencephalography (MEG) signal which represents movement of upper limb. The 3D coordinates obtained from brain signal is inappropriate to be used directly because of the spatial difference between human upper limb and robot arm's end-effector. The spatial difference makes the robot arm to be controlled from a third-person point of view with assist of visual feedback. To resolve this inconvenience, guidance laws which are frequently used for tactical ballistic missile are applied. It could be applied for the users to control robot arm from a first-person point of view which is expected to be more comfortable. The algorithm which enables robot arm to trace MEG signal is provided in this study. The algorithm is simulated and applied to 6-DOF robot arm for verification. The result was satisfactory and demonstrated a possibility in decreasing the training period and increasing the rate of success for certain tasks such as gripping object.