• Journal of Hydrogen and New Energy
• /
• v.23 no.6
• /
• pp.688-695
• /
• 2012

The present study represents the effects of boundary condition on the performance of a centrifugal blower at the interference plane between rotational and stationary domains using three dimensional compressible Navier-Stocks equations. Two boundary conditions, frozen-rotor and stage, are compared to analyze the blower performance. Installation angle between the cutoff of a volute casing and a impeller blade is also introduced to evaluate the blower performance and to understand the internal flow inside the blower. Throughout numerical simulation, it is found that the frozen rotor interface method at the interference plane represents well the variations of flow field inside the blower compared to stage interface method. However, pressure has maximum two percent error according to the installation angles while pressure is almost constant for the stage interface method. And stage interface method can relatively well predict the blower performance. Detailed internal flows of the centrifugal blower are compared and analyzed by numerical simulation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.31-40
• /
• 2019

This paper proposes an adaptive PCIe system for TI C66x DSPs. Conventionally, the PCIe system provided by the C66x is a system dependent on the structure in which the primary core writes an application to the DSP memory through the PCIe interface, then activate the secondary core. Due to the dependency between the cores, when developing a project using a PCIe interface, the remaining cores have to be programmed with a concern of the primary core used as the PCIe interface. Therefore, in order to de-couple the connections among the cores, an adaptive PCIe system is proposed, in the paper, in which the cores operate independently compared to the conventional system. Since the core used as the PCIe interface only runs PCIe related operations in the new system, the remaining cores can be fully utilized without concerning the connections with the core for PCIe interface. In order to verify the feasibility of the proposed adaptive PCIe system, the implementations of LTE-A down link, and IEEE 802.11ac are carried out using the evaluation board which includes a TMS320C6670 chip. Altogether, these results support that we demonstrated that the digital signal processing systems with the PCIe Interface can be developed more rapidly by applying the proposed system.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.61-66
• /
• 2015

With the start of digital broadcasting, TV screen, there is provided a new broadcast service is called EPG (Electronic Program Guide) that can be retrieved directly to a channel or program. However, a study considering the EPG of the user interface on the viewer position is so far insufficient. TV is because everyone watching the media, rather than a specific layer is necessary in order to find easy, intuitive user interface for the program to the viewer. That is, it is possible to quickly find the program to select the attributes that the TV viewer can be easily understood by using the EPG. To this end, this paper first genres which are representative of the properties that distinguish a TV program, time, rating, etc. were systematically classified. So viewers the values of the properties but to specify organized by the EPG, the order of attributes that specify the value we design a user interface that can be selected as having easy. And compare the superiority of the function evaluation of the two through the EPG in the EPG Usability Test proposed by the EPG with the existing commercial paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.111-118
• /
• 1999

Throughout this thesis, I describe the design, fabrication, and evaluation of the 3 DOF farce-reflecting haptic interface using USMs(ultrasonic motors). This haptic interface allows a htmlaIl "observer" to explore and interact with a virtual environrrent for the sense of touch. To effectively display the mechanical impedance of the htmlaIl hand we need a haptic device with specific characteristics, such as low inertia, alrmst zero friction and very high stiffness. USMs have attracted considerable attention as the actuator satisfied these conditions. An observer may grasp the end effector of revice and interact with surfaces and objects created within a virtual environment The revice provires force feedback, allowing users to "feel" objects within the environment. The device works very well, as users are able to detect the edge of the wall, the stiffness of the button and the puncture. TIle force-reflecting haptic interface could be suitable as a master for micro-surgery or as an interface to virtual reality training systems.

• Journal of the Korean Society for information Management
• /
• v.28 no.4
• /
• pp.7-31
• /
• 2011

The aims of this study are to provide an overview of research trends on user interface in the field of Information Science. This study attempts to address the following four questions: 1) what are the research areas or subject topics, 2) what are the patterns of user interface publication, 3) what methods are often used to what topics, and 4) what are the changes in the subject topics and research methods over the past ten years. It analyzed a total of 128 research articles published in four Korean LIS journals and one U.S. journal. The study also reviewed 72 articles published in Korean journals for identifying research trends. The study found that the most productive areas were 'web site evaluation', followed by 'search interface', 'information design' and 'interaction style design'. The most frequently used research methods were survey methods, followed by unobtrusive methods, and experiments. Journal of the Korean Society for Information Management published the most articles on research of user interface. The research of user interface was conducted more frequently in the early 2000s than later years.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.3
• /
• pp.25-33
• /
• 2018

Piping is one of the most frequently occurring collapse type of a levee, and is often caused by roofing (backward erosion piping) at the ground-structure interface. Roofing is generally evaluated using creep ratio. However, creep ratio does not take into account the characteristics of the ground-structure interface. In this study, the roofing risk was investigated by using model test and numerical analysis considering the ground-structure interface characteristics. In the model test, it was confirmed that the piping potential decreased as the interface roughness increased, and this was applied to the numerical analysis. Existing numerical methods can not adequately simulate the particle behavior at the ground-structure interface because only the water level difference is considered. In this paper, particle behavior at the interface was investigated by performing seepage analysis and then, carrying out particle analysis technique simulating the boundary condition of the ground-structure interface. Analysis results have shown that the roofing resistance decreases as the ground-structure interface roughness decreases.

• Journal of Korea Game Society
• /
• v.9 no.3
• /
• pp.15-22
• /
• 2009

Our society is the information-oriented knowledge society which demands the ability how to use computers to all members of the society and is the aging society which the old people 60 or older exist plentifully. But in our society, there are rarely the computers for the old people which are considered their body limit. In this research, we proposed a grip type Hangul(Korean alphabet)interface which are designed under the consideration for the body limit of the old people. The comparison analysis of the proposed Hangul interface is accomplished with the keyboard(ME TOO SV01) for old persons and the key buttons of the old person cellular phone(LG KV-3900) as existing products. The comparison analysis consists of quantitative evaluation as measurements and qualitative evaluation as a survey of the satisfaction levels of 10 older persons. The results of the quantitative evaluation show that the proposed Hangul interface is the best one in the human-technology-design, the number of input buttons which requires moving of user's fingers, the maximum range of moving of user's fingers, and the number of the fingers to use text inputs. The survey results of the satisfaction levels show that interface shape, and input button's positions have best levels and they show that input button's gaps and ease of use have the second levels but their points are almost same with the best points of the keyboard.

• Archives of design research
• /
• v.17 no.1
• /
• pp.49-62
• /
• 2004

Due to the recent surge of wireless Internet and concurrent development of the end user terminal devices having standardized graphical user interface(GUI) and unified operation mechanism for better interactivity in information representation and ease of use, various efforts on the improvement of GUI is widely recognized as one of the key factors that will usher in the next stages of the wireless Internet for the users. Especially, improved usability along with unique visual effect are considered to be the key elements for GUI considering the rapid improvement of the resolution and color on the end user handset devices; thus, the study and research on the subject of GUI is expected to increase along with the wireless Internet using smart phones. User interface of the wires Internet end user handsets will have a definite and significant effect on the user interaction as well as productivity. Domestically, wireless Internet service providers and GUI design companies are making various efforts in producing a common GUI models for standardized operation scheme and improved graphical display capabilities of the hand phones, PDAs and smart phones. In the study, Nokia 3650 model and Microsoft Orange SPV model were chosen as test devices for usability comparison and data collection to collect directional benchmark data in developing next generation smart phone user interface integrating PDAs and phones. The mail purpose of this study is to achieve the most efficient user accessibility to WAP menu through intensive focus on developing WIPI WAP menu having most effective usability for the users in their twenties and thirties. The result of this study can also be used as the base research materials for WAP service development, VM browser development and PDA browser development. The result of this study along with the evaluation model is expected to provide effective analysis materials on the subject of user interface to the developers of the wireless Internet user devices, GUI designers and service planners while short listing key factors to consider in developing smart phones therefore serving as the GUI guideline of WIPI phones.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1759-1767
• /
• 2018

As our society is rapidly entering an aging society, interest in mobile health care services for disease prevention and health care for the elderly is increasing. To increase the usability of mobile healthcare services, UI design should be considered from an older person's perspective and a specific evaluation system is required to diagnose these UI usability levels. This study aimed to develop a UI usability evaluation area of mobile-healthcare application for the elderly. For this, we conducted a literature analysis to explore the comprehensive UI usability evaluation factors, and FGI for expert groups and user groups to derive UI usability evaluation areas and detailed evaluation factors. As a result, the usability evaluation areas for the elderly were divided into four areas 'design', 'contents', 'process', and 'system'. A total of 13 sub-factors and 32 detailed constructions have been derived.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.58-64
• /
• 2003

A mechanical press joining was investigated in ender for joining A1-5052 sheets for automobile body weight reduction. Static tensile and fatigue tests were conducted using tensile-shear specimens for evaluation of fatigue strength of the joint. During Tox joining process for A1-5052 plates, using the current sheet thickness and punch diameter, the optimal applied punching force was found to be 32 kN under the current joining condition. For the static tensile-shear experiment results, the fracture mode is classified into interface fracture mode, in which the neck area fractured due to influence of neck thickness, and pull-out fracture mode due to influence of plastic deformation of the joining area. And, during fatigue tests for the A1-5052 tensile shear specimens, interface failure mode occurred in the region of low cycle. The fatigue endurance limit approached to 6 percents of the maximum applied load, considering fatigue lifetime of $2.5\times10^6$ cycles.