• Journal of the Korea Society for Simulation
• /
• v.6 no.2
• /
• pp.1-14
• /
• 1997

The characteristics of the flow and energy conversion in OMACON liquid-metal MHD system are investigated. Numerical simulation of two-phase flow in the OMACON system without magnetic field was carried out by the Phoenics code and the energy conversion characteristics are studied in association with the fact that the mechanical energy loss at the nozzle of the OMACON system are to be converted into electrical energy. In this system, working fluid (gas) is injected through the mixer located at the bottom of the riser, and is mixed with hot liquid metal. Therefore in the riser two-phase flow is developed under the influence of the gravity. In this study, the interaction between the gas and liquid is considered by the use of IPSA(InterPhase Slip Algorithm) where standard drag coefficient has been used. It has been assumed that in the flow regime the liquid is continuous and the gas is dispersed. For the liquid and gas, the continuity equations, momentum equations and energy equations are solved respectively in association with void fraction in the flow field. In order to calculate the energy conversion efficiency, firstly the ratio of the mechanical energy loss of liquid metal flow at the nozzle to the input thermal energy is considered. Secondly flow pattern of liquid metal in the generator has been analyzed, and the characteristics of the conversion of the mechanical energy into the electrical energy has been investigated. For an representative case where Hartmann number is 540 and magnetic field is 0.35 T, the present analysis shows that the energy conversion efficiency is 0.653. This result is considered to be reasonable in comparison with published experimental results.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.3
• /
• pp.142-152
• /
• 2014

Vehicular Ad-hoc Networks (VANETs) are comprised of wireless mobile nodes characterized by a randomly changing topology, high mobility, availability of geographic position, and fewer power constraints. Orthogonal Frequency Division Multiplexing (OFDM) is a promising candidate for the physical layer of VANET because of the inherent characteristics of the spectral efficiency and robustness to channel impairments. The susceptibility of OFDM to Inter-Carrier Interference (ICI) is a challenging issue. The high mobility of nodes in VANET causes higher Doppler shifts, which results in ICI in the OFDM system. In this paper, a frequency domain com-btype channel estimation was used to cancel out ICI. The channel frequency response at the pilot tones was estimated using a Least Square (LS) estimator. An efficient interpolation technique is required to estimate the channel at the data tones with low interpolation error. This paper proposes a robust interpolation technique to estimate the channel frequency response at the data subcarriers. The channel induced noise tended to degrade the Bit Error Rate (BER) performance of the system. Parallel concatenated Convolutional codes were used for error correction. At the decoding end, different decoding algorithms were considered for the component decoders of the iterative Turbo decoder. A performance and complexity comparison among the various decoding algorithms was also carried out.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.365-369
• /
• 2012

It is very important to control synchronization by inter-network delay compensation in high speed synchronous optcial transmission network systems. In this study we designed a delay measurement system based on OTDR using Rayleigh backscatterer in order to compensate for time delay due to the length of optical fiber line. We observed waveform variations on both averaging time and peak power of laser pulse. Finally, we executed experimental demonstration on its accuracy and test repeatability by comparison to the methods practically used in the industry. Experimental results show maximum error of 0.06usec and standard deviation of 0.021usec, which means it's possibly applied to delay control system for mobile repeaters and stations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.7
• /
• pp.645-651
• /
• 2009

Previous studies have introduced the technique of spinous process osteotomy to decompress spinal stenosis, a procedure which aims to afford excellent visualization while minimizing destruction of tissues not directly involved in the pathologic process. However, biomechanically it has not been investigated whether the sacrifice of posterior spinous process might have potential risk of spinal instability or not, even though supra-spinous and inter-spinous ligaments are preserved. Therefore the aim of this study is to evaluate the biomechanical properties after spinous process osteotomy, using finite element analysis. The model of spinous process osteotomy exhibited no significant increase in disc stress or change in segmental range of motion. It is due to the fact that the instability of lumbar spine has been maintained by the two-types of ligaments compared with the prior surgical technique. Therefore, according to the finite element result on this study, this osotetomy was considered to be a clinically safe surgical procedure and could not cause the instability of the lumbar spine.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.141-150
• /
• 2007

This paper presents a lumped model to predict crosstalk characteristics of thermally driven inkjet print heads. Using the lumped R-C model, heating characteristics of the head are predicted to be in agreement with IR temperature measurements. The inter-channel crosstalk is simulated using the lumped R-L network. The values of viscous flow resistance, R and flow inertance, L of connecting channels are adjusted to accord with the 3-D numerical simulation results of three adjacent jets. The crosstalk behaviors of a back shooter head as well as a top shooter head have been investigated. Predictions of the proposed lumped model on the meniscus oscillations are consistent with numerical simulation results. Comparison of the lumped model with experimental results identifies that abnormal two-drop ejection phenomena are related to the increased meniscus oscillations because of the more severe crosstalk effects at higher printing speeds. The degree of crosstalk has been quantified using cross-correlations between neighboring channels and a critical channel dimension for acceptable crosstalk has been proposed and validated with the numerical simulations. Our model can be used as a design tool for a better design of thermal inkjet print heads to minimize crosstalk effects.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.8-14
• /
• 2013

For alleviating the low spectrum efficiency problem of orthogonal frequency division multiplexing (OFDM), due to the strong inter-cell-interference (ICI) at cell's edge, we introduce comb-spectrum code division multiple access (CS-CDMA) into broadband OFDM system at downlink channel for enabling the use of entire spectrum for seamless coverage. In addition, we develop a new method, called orthogonal cell code (OCC) scheme, to assist CS-CDMA for nullifying the ICI from contiguous cells. In system operation, each of the conventional cells is divided into an outer cell and an inner cell, and a mobile station (MS) should access to the CS-CDMA when it is in the outer cell and access to OFDM when it is in the inner cell. This study investigates the spectrum efficiency of using CS-CDMA and makes a comparison with that of long term evolution (LTE) in the following cases; (1) under an assumption of perfect channel state information and (2) based on channel estimates at a MS station. The results show the great advantage of utilizing the proposed system.

• Journal of Sensor Science and Technology
• /
• v.14 no.5
• /
• pp.350-356
• /
• 2005

We have developed a dual-channel type automatic measurement system to evaluate AC-DC current transfer difference of the thermal current converter(TCC) which is primary standard of AC current. The output drift effect of the TCC is minimized by measuring simultaneously the output voltages of two TCCs using voltmeter. Furthermore, the offset voltage of the voltmeter is cancelled nearly out by taking the average values of two outputs of TCCs measured with the forward-reverse directions using dual channel scanner. The uncertainties of the automatic system were 7 to $86{\mu}A/A$ for 3 mA to 10 A at 40 Hz to 20 kHz, which were evaluated by the comparisons between adjacent range of TCCs and inter-comparison with national measurement institute of Germany(PTB). The capability for ac-dc transfer difference measurement was improved by one order compared with that for the manual ac-dc measurement system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.116-125
• /
• 2003

According to the recent developments of computer, terrestrial broadcasting, satellite broadcasting and CATV technologies, Multimedia TV application combined with such technologies will emerge. Therefore, it is demanded that high-power, wide-band, and high-frequency performance. In this paper, HPA(high power amplifier) for digital TV transmission system is proposed. The analysis and evaluation on the proposed amplifier have been performed by 2-tone signal for general performance evaluation and by 8-VSB signal for comparison with real system. In result, proposed HPA satisfies requirements of high-power, wide-band, and high-frequency performance.

• Journal of Information Technology Services
• /
• v.8 no.1
• /
• pp.165-177
• /
• 2009

This paper reviews diverse IP mobility and fast handover mechanisms for seamless Internet services. Especially, fast handover mechanisms for the Proxy Mobile IPv6( PMIPv6) are categorized according to their approaches. Then, a new fast handover PMIPv6(FH-PMIPv6) mechanism is proposed using only L3 signaling message exchange. In the proposed FH-PMIPv6 mechanism, only local mobility anchor(LMA) exchanges L3 signaling messages with mobility access gateways(MAGs) for the fast handover operation. That is, inter-MAG signalling messages are not required for the fast handover operation. Therefore, unlike existing fast handover mechanisms, two relevant neighbouring MAGs need not set up the security association(SA) to protect fast handover related signaling messages and share SA related information. Moreover, the L3 triggering message is defined newly by standard ICMPv6 to trigger promptly the proposed mechanism. Analysis and comparison of the handover latency are performed for the proposed mechanism and existing mechanisms, which shows that the proposed FH-PMIPv6 mechanism has the favorable performance.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.939-950
• /
• 2015

A single-stage AC-AC converter has been designed for a wind energy conversion system (WECS) that eliminates multistage operation and DC-link filter elements, thus resolving size, weight, and reliability issues. A simple switching strategy is used to control the switches that changes the variable-frequency AC output of an electrical generator to a constant-frequency supply to feed into a distributed electrical load/grid. In addition, a modified random sinusoidal pulse width modulation (RSPWM) technique has been developed for the designed converter to make the overall system more efficient by increasing generating power capacity and reducing the effects of inter-harmonics and sub-harmonics generated in the WECS. The technique uses carrier and reference waves of variable switching frequency to calculate the firing angles of the switches of the converter so that the three-phase output voltage of the converter is very close to a sine wave with reduced THD. A comparison of the performance of the proposed RSPWM technique with the conventional SPWM demonstrated that the power generated by a turbine in the proposed approximately increased by 5% to 10% and THD reduces by 40% both in voltage and current with respect to conventional SPWM.