• 제목/요약/키워드: intensity mapping function

검색결과 26건 처리시간 0.025초

변분법을 이용한 명암도 변환 함수 획득 방법 (A Method of Deriving an Intensity Mapping Function by Using The Variational Technique)

  • 김준형;노창균;고성제
    • 대한전자공학회논문지SP
    • /
    • 제48권5호
    • /
    • pp.10-15
    • /
    • 2011
  • 히스토그램 평활화 방법은 영상의 대조비를 개선시키는 효과적인 방법이다. 하지만 이 방법은 과도한 대조비 향상이나 잡음을 증폭시키는 것과 같은 의도하지 않은 결함을 발생시킬 수 있다. 이러한 결함은 히스토그램 평활화 방법에서 사용되는 명암도 변환 함수를 조절함으로써 감소시킬 수 있다. 본 논문에서는 명암도 변환 함수를 조절하는 문제를 변분법을 사용하여 접근하였다. 이를 위하여 범함수를 정의하고 그 범함수를 최소화하여 명암도 변환 함수를 계산한다. 제안하는 방법을 적용하여 얻은 명암도 변환 함수를 사용하면 눈에 보이는 결함 없이 영상의 대조비를 개선시킬 수 있음을 실험결과로부터 확인할 수 있다.

맵핑 테이블을 이용한 전역 밝기 보상 (Global Intensity Compensation using Mapping Table)

  • 오상진;이지홍;고윤호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.15-17
    • /
    • 2006
  • This paper presents a new global intensity compensation method for extracting moving object in a visual surveillance system by compensating time variant intensity changes of background region. The method that compensates a little changes of intensity due to time variant illumination change and automatic gain control of camera is called global intensity compensation. The proposed method expresses global intensity change with a mapping table to describe complex form of intensity change while the previous method models this global intensity change with a simple function as a straight line. The proposed method builds the mapping table by calculating the cross histogram between two images and then by selecting an initial point for generating the mapping table by using Hough transform applied to the cross histogram image. Then starting from the initial point, the mapping table is generated according to the proposed algorithm based on the assumption that reflects the characteristic of global intensity change. Experimental results show that the proposed method makes the compensation error much smaller than the previous GIC method

  • PDF

MR영상의 뇌관류 정보 Mapping을 위한 영상후처리 시스템개발 (Development of Image Post-processing System for the Cerebral Perfusion Information Mapping of MR Image)

  • 이상민;강경훈;장두봉;김광열;김영일;신태민
    • 한국정보통신학회논문지
    • /
    • 제4권1호
    • /
    • pp.131-138
    • /
    • 2000
  • This paper works on development of an algorithm for mapping of cerebral perfusion parameters using the gamma-variate curve fitting. The signal intensity variate curve according to time measured in each pixel of perfusion MRI is nonlinear, and various hemodynamic parameters are not computed accurately. Levenberg-Marquardt algorithm(LMA), nonlinear optimum algorithm with high convergent speed and stability, is used to compute them. That is, the signal intensity variate curve is fitted by the gamma-variate function. Various hemodynamic parameters - Cerebral Blood Volume(C.B.V), Mean Transit Time(M.T.T), Cerebral Blood Flow(C.B.F), Time-to-Peak(T.T.P), Bolus Arrival Time(B.A.T), Maximum Slope(M.S) - are computed using LMA.

  • PDF

퍼지기반 공간통합에 의한 제주도의 지열 부존 잠재력 탐사 (Geothermal Potential Mapping in Jeju Island Using Fuzzy Logic Based Data Integration)

  • 백승균;박맹언
    • 대한원격탐사학회지
    • /
    • 제21권2호
    • /
    • pp.99-111
    • /
    • 2005
  • 제주도의 지열 부존 가능지역을 추출하기 위하여 최근 활발하게 제안되고 있는 퍼지이론에 기반한 GIS 통합기법을 적용함으로써 그 효용성을 검토하였다. 지질도, 수계 분포 밀도, 분석구 분포 밀도, 선구조 분포 밀도, 항공자력도, 항공방사능도 등 각 주제도의 통계적 상관관계 분석을 위해 퍼지소속함수(Fuzzy membership function)를 그래프에 도시하였다. 현재 온천 발견 위치와 상관성은 용암류의 분출시기가 오래될수록 높았다. 수계, 분석구 및 선구조에서는 분포밀도가 낮은 곳에서 상관성이 높게 나타났으며, 항공자력도와 항공방사능도에서는 대자율 및 감마선 강도가 중간 범위인 곳에서 상관성이 높은 것으로 나타났다. 퍼지 연산자 중에서는 $\gamma$ 연산자($\gamma$=0.75)가 가장 높은 성공 비율을 보였으며, 제주도 서북부 일부지역에서 새로운 지열 부존 가능성이 제기되었다.

특이 유한요소의 구성과 응용 (Formulation of a Singular Finite Element and Its Application)

  • 김명식;임장근
    • 대한기계학회논문집A
    • /
    • 제23권6호
    • /
    • pp.1018-1025
    • /
    • 1999
  • For the effective analysis of two dimensional plane problems with geometrical discontinuities, singular finite element has been proposed. The element matrix equation was formulated on the basis of hybrid variational principle and Trefftz function sets derived consistently from the complex theory of plane elasticity by introducing a conformal mapping function. In order to suggest the accuracy characteristics of the proposed singular finite element, typical plane problems were analyzed and these results were compared with exact solutions. The singular finite element gives the comparatively exact values of stress concentration factors or stress intensity factors and can be effectively used for the analysis of mechanical structures containing various geometrical discontinuities.

혼합모우드 변형하에 있는 복합재료 유한평판의 경사진 균열해석 (Analysis of an Inclined Crack in Finite Composite Plate Under Mixed Mode Deformation)

  • 염영진;홍창선
    • 대한기계학회논문집
    • /
    • 제13권4호
    • /
    • pp.625-635
    • /
    • 1989
  • 본 논문에서는 이 방법을 사용하여 glass/epoxy와 graphite/epoxy 유한평판이 균일응력과 균일변위 경계조건을 받을 때 평판 종횡비 H/W를 1,2,3, 균열길이와 폭의 비 L/W를 0.1부터 0.7까지, 균열각도를 0, 30, 45, 60으로 변화 시키면서 응력강도수정계수를 구하려고 한다.

이진화 영상분할기법과 적응적 융합 가중치를 이용한 광노출 보정기법 (A Light Exposure Correction Algorithm Using Binary Image Segmentation and Adaptive Fusion Weights)

  • 한규필
    • 한국멀티미디어학회논문지
    • /
    • 제24권11호
    • /
    • pp.1461-1471
    • /
    • 2021
  • This paper presents a light exposure correction algorithm for less pleasant images, acquired with a light metering failure. Since conventional tone mapping and gamma correction methods adopt a function mapping with the same range of input and output, the results are pleasurable for almost symmetric distributions to their intensity average. However, their corrections gave insufficient outputs for asymmetric cases at either bright or dark regions. Also, histogram modification approaches show good results on varied pattern images, but these generate unintentional noises at flat regions because of the compulsive shift of the intensity distribution. Therefore, in order to sufficient corrections for both bright and dark areas, the proposed algorithm calculates the gamma coefficients using primary parameters extracted from the global distribution. And the fusion weights are adaptively determined with complementary parameters, considering the classification information of a binary segmentation. As the result, the proposed algorithm can obtain a good output about both the symmetric and the asymmetric distribution images even with severe exposure values.

고응력 분포에 새로운 광탄성실험 하이브릿법 적용 (Application of the Photoelastic Experimental Hybrid Method with New Numerical Method to the High Stress Distribution)

  • 황재석;;이동훈;이동하
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.73-78
    • /
    • 2004
  • In this research, the photoelastic experimental hybrid method with Hook-Jeeves numerical method has been developed: This method is more precise and stable than the photoelastic experimental hybrid method with Newton-Rapson numerical method with Gaussian elimination method. Using the photoelastic experimental hybrid method with Hook-Jeeves numerical method, we can separate stress components from isochromatics only and stress intensity factors and stress concentration factors can be determined. The photoelastic experimental hybrid method with Hook-Jeeves had better be used in the full field experiment than the photoelastic experimental hybrid method with Newton-Rapson with Gaussian elimination method.

  • PDF

균열형상의 강체함유물을 포함하는 무한체에 대한 균열선단 부근의 응력분포와 응력세기계수 (Stress intensity factor and stress distribution near crack tip for infinite body containing regid inclusion with crack shape)

  • 이강용;김종성
    • 대한기계학회논문집A
    • /
    • 제22권3호
    • /
    • pp.680-683
    • /
    • 1998
  • In case of the infinite body containing a rigid inclusion with line crack shape, stress intensity factor is determined and the relation between stress intensity factor and stress distribution near a crack tip is developed. Also, the relation between stress intensity factor and Kolosoff stress function is developed. Finally, these results are compared with those that the crack surface is under no traction.

일반 형상의 커프스형 강체균열에 대한 열응력세기계수 결정 (Determination of thermal Stress Intensity Factors for General Cusp-Crack Shaped Rigid Inclusion)

  • 이강용;장용훈
    • 대한기계학회논문집
    • /
    • 제16권6호
    • /
    • pp.1216-1220
    • /
    • 1992
  • 본 연구에서는 Lee등의 연구를 일반화하기 위하여 급수 형태의 등각사상함수 로 표현되는 일반형태의 커스프형 강체함유물이 존재하는 경우에 대하여 복소 포텐셜 함수와 TSIF에 대한 일반해를 구하기로 한다.