• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.299-306
• /
• 2001

As a part of basic investigation for utilization of canned food processing by-products, a food components of the canned oyster processing waste water such as boiled and released water(BRW), wash water(WW) were investigated and compared with hot-water extracts from oyster. From the results of measuring heavy metal conte수, viable cells and coliform group, the canned oyster processing waste waters might not invoke health risk in using food resource. The contents of taste compounds (free amino acids, ATP related compounds, TMA (O) and total creatinine) of BRW and WW accounted for about 254% and 95%, respectively, in comparison with those of control (hot-water extract from oyster). The BRW showed a very high content of salt in comparing to the WW and control. In descending order, the values of whiteness index was WW, control and BRW. Sensory scores for color, oyster flavor intensity and saline taste were not significantly different between WW and control. But, BRW had the highest score in oyster flavor intensity, while had the lowest score in color and saline taste. But, the color and saline taste of BRW might be able to control by some pretreatment (concentration and drying in mild condition, desalination and recipe control etc). These results indicated that BRW and WW generated from various step during canned oyster processing could be a potential food resource by controlling of saline taste and color intensity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.415-418
• /
• 1996

Etching Process, one of the most important process in semiconductor fabrication, has input control part of which components are pressure, gas flow, RF power and etc., and plasma gas which is complex and not exactly understood is used to etch wafer in etching chamber. So this process has not real-time feedback controller based on input-output relation, then it uses EPD(End Point Detection) signal to determine when to start or when to stop etching. Various type EPD controller control etching process using EPD signal obtained from optical intensity of etching chamber. In development EPD controller we concentrate on compensation of this signal intensity and setting the relative signal magnitude at first of etching. We compensate signal intensity using neural network learning method and set the relative signal magnitude using fuzzy inference method. Potential of this method which improves EPD system capability is proved by experiences.

• Phonetics and Speech Sciences
• /
• v.5 no.4
• /
• pp.3-15
• /
• 2013

The acoustic analysis of diadochokinesis(DDK) has been used to evaluate dysarthria. However, there has not been an automatic method to evaluate dysarthria. The aim of this study was to introduce a new automated program to measure DDK tasks and to apply this to clinical patients with idiopathic Parkinson's disease(IPD). Fourty-seven patients with IPD and a healthy control group of twenty participants were selected with every DDK task recorded three times. Twenty-five acoustic parameters in the program were developed. The relevant parameters were times of DDK, pitch related parameters, intensity parameters which were analyzed by 2-way ANOVA. Significant differences between the groups were found in the times of DDK, pitch related parameters, and intensity parameters. The findings indicated that the pitch of control group was more stable than that of the IPD. Even though the patients with IPD had a higher intensity value, this phenomenon was caused by the weakness of the IPD group who could not control their speech with a breath.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.269-274
• /
• 2013

We are used with the alkaline ion water which an application field does to object for drinking water compare with the alkaline ion water which asked ion acid electrolysis so as to be very different. This is used with sterilization disinfection use by residual chlorine in case of strong acidity according to ph intensity, and in case of middle acidity use by washing and face washing, and mix with meal materials in case of weak acidity widely usable in cooking. Acid ion water generates as we electrolyze water. Chlorine gas and sodium hydroxide etc. was generated at electrolysis process, and we have toward sterilizing power. Derelicts such as chlorine, phosphorus, sulfur etc. are gathered from a negative ion, and we make acid ion water to + electrode direction in electrolysis. We used a diaphragm in order to disconnect too acid water and alkaline water. We implemented so that the acid water which it came down to three kinds of PWM voltage to PWM (pulse width modulation) control, and implementation method of ph intensity change authorized ph intensity between weak acidity to electrode in strong acidity as we used Microprocessor, and intensity was adjusted successively by PWM control was generated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.60-66
• /
• 2011

There are several technological problems have to be resolved for LEDs to be used as a general purpose light source. In addition, there are several differences between existing luminaires and the general planer LED luminaire for the intensity distribution. Therefore, the optical engineer then faces the challenging a problem of designing for a spatially extended and non-uniform light source. In the previous studies on the optical design of luminaires, a lot of studies on reflectors and light source have been conducted but the ones on prisms and lenses are insufficient at present. This study developed the numerical model of planar prism LED luminaire to control luminous intensity distribution of LED luminaires. And this study presents an optical calculation process for the prism optical design of a planar prism LED luminaire and a comparison of the simulation results between the developed numerical model and Photopia 2.0 to verify the accuracy of the numerical model. In addition, this study showed a method for the control of various luminous intensity distribution from the developed numerical model.

• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.532-539
• /
• 2018

Multiple LED arrays can be utilized in visible-light communication (VLC) to improve communication efficiency, while maintaining smart illumination functionality through dimming control. This paper proposes a modulation scheme called "Spatial Intensity Modulation" (SIM), where the effective number of turned-on LEDs is employed for data modulation and dimming control in VLC systems. Unlike the conventional pulse-amplitude modulation (PAM), symbol intensity levels are not determined by the amplitude levels of a VLC signal from each LED, but by counting the number of turned-on LEDs, illuminating with a single amplitude level. Because the intensity of a SIM symbol and the target dimming level are determined solely in the spatial domain, the problems of conventional PAM-based VLC and related MIMO VLC schemes, such as unstable dimming control, non uniform illumination functionality, and burdens of channel prediction, can be solved. By varying the number and formation of turned-on LEDs around the target dimming level in time, the proposed SIM scheme guarantees homogeneous illumination over a target area. An analysis of the dimming capacity, which is the achievable communication rate under the target dimming level in VLC, is provided by deriving the turn-on probability to maximize the entropy of the SIM-based VLC system. In addition, a practical design of dimmable SIM scheme applying the multilevel inverse source coding (MISC) method is proposed. The simulation results under a range of parameters provide baseline data to verify the performance of the proposed dimmable SIM scheme and applications in real systems.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.521-529
• /
• 2022

This study evaluated the effects of agricultural reflective film and HANSPEK film on the fruit quality attributes and peel color variables of 'Fuji' apples. The reflective films were applied under the tree canopies at 20 and 30 days before harvest (DBH), and a tree with no films was used as the control. Depending on the measurement locations, the light intensity was 7.4 - 14.6% higher in the reflective film treatments than that of the control. However, no difference in the light intensity was observed between the reflective and HASPEK films. In addition, the light intensity was not also different between the 20 and 30 DBH. At harvest, the flesh firmness, fruit weight, soluble solids content, titratable acidity, and internal ethylene concentration were not different regardless of the type of reflective film and treatment time. In addition, the peel color variables were not affected in the equatorial region. However, in the calyx region, the L* and b* values were decreased, and the a* value was increased by the reflective and HANSPEK films compared with the control. Hence, the hue angle was decreased to near 0^o (red), and the peel color was improved. Therefore, this study suggests that the application of the HANSPEK film under a tree canopy could improve the fruit peel color of 'Fuji' apples.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.2
• /
• pp.107-111
• /
• 2014

Objective: In the present study, we investigated the protective effects of low-intensity treadmill training in doxorubicin-induced cardiotoxicity rat models. Design: Randomized controlled trial. Methods: In this study, we randomly divided them into four groups. The normal group included non-cardiotoxicity normal control (n=10), the control group included non-treadmill training after doxorubicin-induced cardiotoxicity (n=10), the experimental group I included low-intensity treadmill training (3 m/min) after doxorubicin-induced cardiotoxicity (n=10), and the experimental group II included low-intensity treadmill training (8 m/min) after doxorubicin-induced cardiotoxicity (n=10). Rats in the treadmill training group underwent treadmill training, which began at 2 weeks after first intraperitoneal injection. We determined the body weight change for each rat on days 1 and 21. Biochemical markers (lactate dehydrogenase [LDH], creatine kinase [CK], glutathion, aspartate transaminase [AST], and alanine transaminase [ALT]) concentration in the serum change of rats from all four groups was examined at the end of the experiment. Results: The results showed that the experimental group I and II showed a significant increase in body weight as compared with that of the control group (p<0.05). We observed that the biochemical markers (LDH, CK, glutathion, AST, and ALT) were improved in the experimental group I than the experimental group II (p<0.05). There was no difference between the experimental groups. Conclusions: In conclusion, our data suggest that low-intensity treadmill training applied after doxorubicin treatment protects against cardiotoxicity following treatment, possibly by enhancing antioxidant defenses and inhibiting cardiac muscle cell apoptosis.

• Korean Journal of Exercise Nutrition
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2009

The aim of this study was to investigate gene expression related with lipid metabolism and long chain fatty acid oxidation rates in the skeletal muscle by exercise. Sprague-Dawley rats were randomly divided into control (CON: n=7), high-intensity (HI-EX: n=7) and low-intensity exercise (LI-EX; n=7) groups. Rats in LI-Ex group were forced to run on the treadmill at the speed of 10m/min for 60 min. On the other hand, rats in the HI-Ex group were forced to run on the treadmill slope 0 at the speed of 25 m/min for 60 min. The palmitate oxidation rate of the RG was increased immediately and 1 hr after exercise in the HI-Ex group, and the HI-Ex group was higher than in the LI-Ex group in RG and WG. Expression of PPARα of the RG in HI-Ex groups was increased compared with control immediately after exercise. FAT/CD36 expression were not shown any significant effect by exercise. AMPK expression of the RG in the HI-Ex group was significently increased immediately after exercise compared with control. The change in CPT-1 expression of the RG in the HI-Ex group showed a similar pattern to that AMPK. In the summary, the gene expression of PPARα, AMPK and CPT1 that was related lipid metabolism was not significantly affected by low-intensity exercise, but effected by high-intensity exercise. In conclusion, exercise intensity and amounts might be have very important role to regulate gene expression related with metabolism.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1018-1023
• /
• 2005

A new MR cylinder with built-in valves using MR fluid (MR valve) is suggested and fabricated for fluid control systems. The MR fluid is a newly developed functional fluid whose obvious viscosity is controlled by the applied magnetic field intensity. The MR cylinder is composed of cylinder with small clearance and piston with electromagnet. The differential pressure is controlled by the applied magnetic field intensity. It has the characteristics of simple, compact and reliable structure. The size of MR cylinder and piston has ${\varphi}30mm{\times}300mm\;and\;{\varphi}28.5mm{\times}120mm$ in face size, respectively and 0.8mm in gap length. Through experiments, it was found that the differential pressure is controlled by the applied magnetic field intensity under little influence of the flow rate, which corresponds to a pressure control valve. The differential pressure of 0.47MPa and contact force of 320N were obtained with the input current of 1.5A. The rising time of force was 1.1s in step response of a manipulator using the MR cylinder. The effectiveness of the MR cylinder was also demonstrated through the force control.