• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.23-30
• /
• 2022

Recently, traffic congestion and environmental pollution have occurred due to population concentration and vehicle increase in large cities. Various studies are being conducted to solve these problems. Most of the traffic congestion in cities is caused by traffic signals at intersections. This paper proposes a dynamic traffic light control (DTLC) scheme to support safe vehicle operation and smooth traffic flow using real-time traffic information based on VANET. DTLC receives instantaneous speed and directional information of each vehicle through road side units (RSUs) to obtain the density and average speed of vehicles for each direction. RSUs deliver this information to traffic light controllers (TLCs), which utilize it to dynamically control traffic lights at intersections. To demonstrate the validity of DTLC, simulations were performed on average driving speed and average waiting time using the ns-2 simulator. Simulation results show that DTLC can provide smooth traffic flow by increasing average driving speed at dense intersections and reducing average waiting time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1516-1539
• /
• 2022

This article shows a set of physical information fusion IoT systems that we designed for smart buildings. Its essence is a computer system that combines physical quantities in buildings with quantitative analysis and control. In the part of the Internet of Things, its mechanism is controlled by a monitoring system based on sensor networks and computer-based algorithms. Based on the design idea of the agent, we have realized human-machine interaction (HMI) and machine-machine interaction (MMI). Among them, HMI is realized through human-machine interaction, while MMI is realized through embedded computing, sensors, controllers, and execution. Device and wireless communication network. This article mainly focuses on the function of wireless sensor networks and MMI in environmental monitoring. This function plays a fundamental role in building security, environmental control, HVAC, and other smart building control systems. The article not only discusses various network applications and their implementation based on agent design but also demonstrates our collaborative information fusion strategy. This strategy can provide a stable incentive method for the system through collaborative information fusion when the sensor system is unstable in the physical measurements, thereby preventing system jitter and unstable response caused by uncertain disturbances and environmental factors. This article also gives the results of the system test. The results show that through the CPS interaction of HMI and MMI, the intelligent building IoT system can achieve comprehensive monitoring, thereby providing support and expansion for advanced automation management.

• Journal of Platform Technology
• /
• v.12 no.1
• /
• pp.32-43
• /
• 2024

In recent years, a platform providing a Visual Programming development environment capable of 3D editing and interaction editing in an In-VR environment to quickly prototype VR/AR contents for education of VR and AR for general users and children. In the past, VR contents were mostly viewed by users. However, thanks to the rapid development of recent computing technologies, VR contents interacting with users have emerged as a device capable of tracking user behavior in a small size It was able to appear. In addition, because VR is extended to AR and MR, it can be used in all three virtual environments and requires efficient user interface(UI). In this paper, we propose UI based on eye tracking. Eye-tracking-based UI not only reduces the amount of time the user directly manipulates the controller, but also dramatically lowers the time spent on simple operations, while reducing the need for a dedicated controller by allowing multiple types of controllers to be used in combination. The proposed platform can easily create a prototype of their intended VR/AR App(or content) even for users(beginners) who do not have a certain level of knowledge and experience in 3D graphics and software coding, and share it with others. Therefore, this paper proposes a method to use VAL more effectively in a 5G environment.

• The Journal of Society for e-Business Studies
• /
• v.25 no.4
• /
• pp.143-154
• /
• 2020

With the increasing trend of making manufacturing system intelligent and autonomous, the introduction of robot-assist automation, like machine tending system for automated operation of CNC machine tools, is being actively carried out at many industrial sites. Most important part of this intelligent system to install machine tending system, is interface programming between the CNC machine tools and the industrial robot. Despite this importance, however, the machine tending system has many setup problems. it is necessary for difficult re-program of both controllers whenever a new CNC machine tool or robot is introduced. And, the helps of external engineers is required even though trivial changes due to the complex structure of the machine tending system. Authors of this paper introduces the integrated system of the interface between heterogeneous CNC machine tools and industrial robots. In addition, the digital twin implemented inside the machine tool controller enable shop-floor operators to change the interface programming easily. To implement this system, an integrated development environment for 1) an intelligent HMI platform that provide standardized interfaces to heterogeneous CNC machine tools and 2) a robot platform developing application software of various robots, was established. For easy un-tact environment, this paper explain the development of 3) a game-engine based web program of controlling and monitoring machine tending system remotely.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.205-212
• /
• 2011

The high performance intelligent robots have become to use a lot of sensors, actuators and controllers which are connected via bus-type networks while the point to point connection was widely used in-robot networks of existing robots. The bus topology makes the robot system share data internally and it can also reduce the weight of the robot because of smaller wiring harness. The CAN is one of serial bus communication protocols typically used for in-vehicle networks and now it can also be used for in-robot networks because of its low cost and reliability. A performance evaluation system for this type of networked system is developed to analyze the real-time operation and the reliability of a serial-bus network, and the usefulness of the developed evaluation system is shown by some experiments for a network of many CAN nodes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1104-1110
• /
• 2012

The inverted pendulum system is a common, interesting control problem that involves many basic elements of control theory. In the early, controls of stabilization for the inverted pendulum system were used classical methods like PD, PID controller. In recently, however, control methods based on modern and intelligent control theory are widely applied. The fuzzy logic controller which is often used in nonlinear control is a little too hard to design due to increasing fuzzy rules rapidly if the given system like inverted pendulum has many state variables. Also, in case the state variables are divided into two parts, two fuzzy controllers are needed in the control system. In this paper, the authors propose FCSC(Fuzzy Controller based on State variables Combination) that reorganized into two new signals depending on the physical meaning of the four state variables of the inverted pendulum system. The proposed method is applied to the inverted pendulum system and simulations are accomplished to illustrate the control performance.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3848-3854
• /
• 2000

For the satisfying performance of a control system, design of a controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, sensors are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable sensor readings for good controller performance. In case of sensor faults. they are detected by examining the sensor output values and the major values of the system, and then the types of the faults are recognized by the analysis of symptoms of faults. If necessary self-validating sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data.In this paper, a self 'validating sensor is applied to the control of a flexible link system with the sensor fault problems in the light sensor module for exact IXlsitioning to show the applicahility. It is shown that the digital controller can provide a satisfactory loop performance even when the sensor faults occur.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.34-48
• /
• 2017

This study proposes a new approach to control a trajectory control of vertical type articulated robot arm with six revolution joints by computed torque method for manufacturing process automation. The proposed control scheme takes advantage of the properties of the fuzzy controllers. The proposed method is suitable to control of the trajectory and path control in cartesian space for vertical type articulated robot manipulator for forging manufacturing process automation. The results is illustrated that the proposed fuzzy computed torque controller is more stable and robust than the conventional computed torque controller. This study is included with an analytical methodology of inverse kinematic computation for 6 DOF manipulators. And an intelligent PID based on feed forward fuzzy control structure is applied to control the working path control with disturbances caused by uncertainty parameters of the manipulator dynamic model. Lastly, the validity of proposed is verified by simulations and experiments.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.51-65
• /
• 2002

This paper presents a design method of the neural network-based controller using an indirect adaptive control method to deal with an intelligent control for chaotic nonlinear systems. The proposed control method includes the identification and control Process for chaotic nonlinear systems. The identification process for chaotic nonlinear systems is an off-line process which utilizes the serial-parallel structure of multilayer neural networks and simple state space neural networks. The control process is an on-line process which uses the trained neural networks as the system model. An error back-propagation method was used for training of identification and control for chaotic nonlinear systems. The performance of the proposed neural network controller was evaluated by application to the Duffing equation and the Lorenz equation, and the proposed controller was compared with other neural network-based controllers by computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1113-1118
• /
• 2012

Smart grid and intelligent transportation system draw significant interest since they are considered as one of the green technologies. These systems require a large number of sensors, actuators, and controllers. Also, machine-to-machine (M2M) communications is important because of the automatic control. The LTE-Advanced networks is preparing a set of functions that facilitate the M2M communications, and particularly the development of an efficient call admission control mechanism is critical. A method that groups MTC devices according to QoS constraints and determines the admission depending on the QoS satisfaction is limitedly applied only if the data transmission period and the maximum delay are identical. This paper proposed a call admission control that is free from such limitation and also optimizes the admission process under the certain condition of the transmission period and maximum delay. The theorems regarding the proposed method are presented with the proofs. The simulations confirms its validity and shows it is better in call admission probability than existing works.