• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.625-629
• /
• 2000

Six yearling Suffolk ewes were used to study the effect of different roughage proportion diets (30%=LR, and 70%=HR) and intake levels (0.7 M and 1.3 M) on heat production and thermoregulatory responses in sheep exposed to different ambient temperatures (20 and $30^{\circ}C$). Sheep fed HR had higher heat production (HP) and time spent eating (TSE) and lower time spent standing (TSS) than those fed LR. But effect of roughage proportion on vaginal temperature (Tv) was obvious only at high intake and at $30^{\circ}C$. Sheep fed high intake had higher Tv, HP, TSS, and TSE than those fed low intake. Roughage proportion and intake level did not have an effect on respiration rate (RR), but ambient temperature did. Ambient temperature did not have an effect on HP, TSS and TSE. At $30^{\circ}C$ sheep had higher Tv and RR than those at $20^{\circ}C$. There were interactions between intake level and ambient temperature in TSS, between intake level and roughage proportion in TSE, and between roughage proportion and ambient temperature in HP. Results indicate that high roughage diet imposes a greater potential heat load on animals than low roughage diet when given at high ambient temperature, but not at low ambient temperature. And the effects is more pronounced at high intake.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.336-343
• /
• 2017

Intake air conditions, such as air temperature, pressure, and humidity, are very important parameters that influence engine performance including combustion and emissions characteristics. The purpose of this study is to investigate the effects of intake air temperature on combustion and exhaust emissions characteristics in a single cylinder diesel engine. In this experiment, an air cooler and a heater were installed on the intake air line and a gas flow controller was installed to maintain the flow rate. It was found that intake air temperature induced the evaporation characteristics of the fuel, and it affects the maximum in-cylinder pressure, IMEP(indicated mean effective pressure), and fuel consumption. As the temperature of intake air decreases, the fuel evaporation characteristics deteriorate even as the fuel temperature has reached the auto-ignition temperature, so that ignition delay is prolonged and the maximum pressure of cylinder is also reduced. Based on the increase in intake air temperature, nitrogen oxides(NOx) increased. In addition, the carbon monoxide(CO) and unburned hydrocarbons(UHC) increased due to incomplete fuel combustion at low intake air temperatures.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.107-115
• /
• 1999

Hydrocarbon emission from spark ignition engines deeply relates with fuel evaporation mechanism. Therefore, fuel evaporation on the back of the intake valve is very important to understand fuel evaporation mechanism during engine warm up period. Intake valve heat transfer model was build up to estimate the amount of fuel evaporation on the intake valve back . Intake valve temperature was measured intake valve temperature is increased rapidly during few seconds right after engine start up and it takes an important role on fuel evaporation. The liquid fuel evaporation rate on the intake valve back proportionally increases as valve temperature increases, however its contribution slightly decreases as intake port wall temperature increases. The fuel evaporation rate on the valve back is about 40∼60% during engine warm-up period and it becomes about 20∼30% as intake port wall temperature increases. The estimation model also makes possible model also makes possible to review the effect of valve design parameters such as the valve mass and seat area on fuel evaporation rate through intake valve heat transfer.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.31-38
• /
• 2009

This study was conducted to forecast inner water temperature strata change by extracting deep water from a dam. For the methodology, the scope wherein the balance between the volume of low-temperature water intake through the virtual water intake opening as installed within the stored water area and the volume of water intake from the surrounding area is not destroyed was calculated through the CFD simulation technique using the computational fluid dynamics(CFD) interpretation method. This study suggested a supplementary method(diffuser) to avoid destroying the water temperature strata, and the effect was reviewed. In case of intake of the same volume, when the velocity of flow of water intake is reduced by increasing the pipe diameter, the destruction of water temperature strata can be minimized. When the area(height) where the intake of water is possible is low, a diffuser for interrupting the vertical direction inflow should be installed to secure favorable water intake conditions in case of water intake on the upper part. This study showed that there was no problem if the intake-enabled, low-temperature area was secured approximately 10m from the bottom when the scope that does not destroy the water temperature strata in case of water intake was forecast using the regression formula.

• Journal of ILASS-Korea
• /
• v.26 no.1
• /
• pp.18-25
• /
• 2021

The objective of this study is to investigate the effect of cryogenic intake air temperature on the injected fuel droplet behavior in a compression ignition engine under the different start of energizing timing. To achieve this, the intake air temperatures were changed from -18℃ to 18℃ in steps of 9℃, and the result of fuel evaporation rate, Sauter mean diameter, and equivalence ratio distributions were compared. When the intake air temperature decreased in steps of 9℃, less fuel was evaporated by about 3.33% because the cylinder temperature was decreased. In addition, the evaporated fuel amount was increased with retarding the start of energizing timing because the cylinder temperature raised. However, the difference was decreased according to the retarded start of energizing timing because the cylinder pressure was also increased at the start of fuel injection. The equivalence ratio was reduced by 5.94% with decreasing the intake air temperature. In addition, the ignition delay was expected to longer because of the deteriorated evaporation performance and the reduced cylinder pressure by the low intake air temperature.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.22-31
• /
• 1993

Spark-ignition engine knock is affected by engine operating conditions such as engine speed, spark timing and intake air temperature. In this study the effect of intake air temperature on knock characteristics was studied experimentally using a 4-cylinder carburetor spark-ignition engine. The cylinder pressure data at 2000rpm were taken for intake air temperature range of $30^{\circ}C$ to $80^{\circ}C$ with $10^{\circ}C$ interval. And 80 consecutive cycles were taken at each experimental condition. As the same spark timing, as the intake air temperature increased by $50^{\circ}C$, the mean knock intensity increased about 20kPa. This effect corresponds to that of spark timing advance of 3 crank angle degrees.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5085-5088
• /
• 2013

Background: The north-western region of China has a high incidence of oesophageal cancer. This study aimed to investigate whether the intake of food and beverage at high temperature is associated with the risk of oesophageal cancer among adults residing in this remote part of China. Materials and Methods: A case-control study was undertaken in Urumqi and Shihezi, Xinjiang Uyghur Autonomous Region of China, between 2008 and 2009. Participants were 359 incident oesophageal cancer patients and 380 hospital-based controls. Information on temperature of food and beverage intake was obtained by face-to-face interview. Logistic regression analyses were performed to ascertain the association between intake temperature and the risk of oesophageal cancer. Results: The oesophageal cancer patients consumed foods and beverages at higher temperatures than controls, p<0.001. High temperature of tea, water and food intake appeared to increase the risk of oesophageal cancer by more than two-fold, with adjusted odds ratio (95% confidence intervals) of 2.86 (1.73-4.72), 2.82 (1.78-4.47) and 2.26 (1.49-3.45), respectively. Conclusions: Intake of food and beverage at high temperature was positively associated with the incidence of oesophageal cancer in north-western China.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.3
• /
• pp.293-298
• /
• 1991

A study was conducted to determine the effect of environmental temperature and level of food intake on plasma concentration of thyroid hormones. Three dairy heifers were used in an experiment which consisted of three levels of chamber temperature (10, 20 and $30^{\circ}C$) and three levels of food intake (100, 75 and 50% of recommended requirements). The analysis showed significant effects of environmental temperature on plasma triiodothyronine concentration, rectal temperature, respiration rate and heart rate but not on heat production. The range of plasma triiodothyronine was 2.51~1.79 ng/ml when the environmental temperature varied from 10 to $30^{\circ}C$. Effects of feed intake level were significant for heart rate and heal production. Heat production decreased from 25.9 to $20.0kJ/kg^{0.75}{\cdot}h$ when the TDN intake decreased from 66.3 to $35.1g/kg^{0.75}{\cdot}d$. There was no interactive effect of environmental temperature and feed intake level. Plasma triiodothyronine concentration decreased under high environmental temperature without any changes in heat production. The effects of environmental temperature and feed intake level on the physiological function of thyroid gland, as indicated by the relative circulating rate of thyroid hormones, were found to be clear.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.1
• /
• pp.83-89
• /
• 2002

The goal of this research is to understand the NOx emission in direct injected diesel engine with premixed hydrogen fuel. Hydrogen fuel was supplied into the test engine through the intake pipe. Amount of hydrogen-supplemented fuel was 70 % basis on heating value of the total input fuel. The effects of intake air temperature and exhaust gas recirculation(EGR) on NOx emission were studied. The intake air temperatures were varied from $23^{\circ}C$ to $0^{\circ}C$ by using liquid nitrogen. Also, the exhaust gas was recirculated to the intake manifold and the amount of exhaust gas was controlled by the valve. The major conclusions of this work include: ( i ) nitrogen concentrations in the intake pipe were increased by 30% and cylinder gas temperature was decreased by 24% as the intake air temperature were changed from $23^{\circ}C$ to $0^{\circ}C$; ( ii ) NOx emission per unit heating value of supplied fuel was decreased by 45% with same decrease of intake air temperature; and (iii) NOx emission was decreased by 77% with 30% of EGR ratio. Therefore, it may be concluded that EGR is effective method to lower NOx emission in hydrogen fueled engine.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.75-82
• /
• 2002

The effects of intake mixture temperature on performance and exhaust emissions under four kinds of engine loads were experimentally investigated by using a four-cycle four-cylinder, swirl chamber type, water-cooled diesel engine with scrubber EGR system operating at three kinds of engine speeds. The purpose of this study is to develop the scrubber exhaust gas recirculation(EGR) control system for reducing $NO_x$ and soot emissions simultaneously in diesel engines. The EGR system is used to reduce NOx emissions. And a novel diesel soot-removal device with a cylinder-type scrubber which has five water injection nozzles is specially designed and manufactured to reduce soot contents in the recirculated exhaust gas to the intake system of the engine. The influences of cooled EGR and water injection, however, would be included within those of scrubber EGR system. In order to study the effect of intake mixture temperature, a intake mixture heating device which has five heating coils is made of a steel drum. It is found that the specific fuel consumption rate is considerably elevated by the increase of intake mixture temperature, and that NOx emissions are markedly decreased as EGR rates are increased and intake mixture temperature is dropped, while soot emissions are increased with increasing EGR rates and intake mixture temperature.