• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.295-307
• /
• 1988

본 연구의 목적은 흡기관내의 유체유동을 Lax-Wendroff 방법을 이용한 유한차분법으로 해석함으로서 엔진 흡기효율에 영향을 미치는 흡기관내 압력을 관찰하고 이를 이용한 흡기관계 최적 설계기술을 확립하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.836-843
• /
• 1998

In this paper effects of resonator within intake manifold system on volumetric efficiency were investigated n the 4-cylinder and 4 stroke Diesel Engines. The effects of resonator system were analyzed on resonant speed and on volumetric efficiency for a complicated intake system with resonator was confirmed. And the optimum design method of the resonant system which had the overall high and flat characteristic of volumetric efficiecncy was proposed.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.196-205
• /
• 2016

자동차로부터 배출되는 배기가스는 오존 및 미세먼지 등의 농도를 증가시켜 인체의 건강을 위협할 뿐만 아니라 지구 온난화 물질인 이산화탄소를 다량 배출하고 있어 지구 온난화에도 지대한 영향을 미치고 있다. 그래서 정부는 자동차에서 배출되는 배기가스를 효율적으로 규제하기 위한 제도로 운행차 배출가스 정밀검사 제도를 시행하고 있다. 자동차 배출가스를 줄이려는 연구는 다방면으로 이루어지고 있으며, 자동차의 배출가스 중 HC, NOx, $CO_2$ 등의 발생을 줄이기 위한 연구가 이루어지고 있다. 그러나 노후된 자동차에 대한 배출가스 저감에 대한 연구는 부족한 실정이다. 노후된 디젤자동차들이 운행차 배출가스 정밀검사를 만족하기 위해서는 흡기 다기관(manifold)과 인젝터의 카본퇴적물(Carbon sediment)을 세척하여 출력향상 및 배출가스 저감에 대한 연구가 필요하다. 따라서 본 연구에서는 차령 5년 이상, 주행거리 80,000 km 이상의 디젤자동차에 흡기 다기관 클리닝과 인젝터 클리닝을 동시에 수행하여 매연 발생에 미치는 영향을 비교 분석하였다. 실험결과, 흡기다기관 클리닝과 인젝터 클리닝을 동시 수행한 결과는 각각 수행한 결과보다 매연을 75.2% 감소시켰다. 또한, 흡기다기관 클리닝과 인젝터 클리닝을 동시 수행한 결과는 검사 후 8.5초부터 배출허용 기준 30%이하를 만족하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권7호
• /
• pp.951-962
• /
• 2010

An experimental study was performed to investigate the improvement of response performance of a turbocharged diesel engine under the operating conditions of low speed and fast acceleration. In this study, the experiment for improving the low speed and acceleration performance is performed by means of injecting air into the intake manifold of compressor exit during the period of low speed and application of a fast acceleration from low speed. The effects of air injection into the intake manifold on the response performance were investigated at various applicant parameters such as air injection pressure, accelerating rate, accelerating time, engine speed and load. The experimental results show that air injection into the intake manifold at compressor exit is closely related to the improvement of turbocharger lag under low speed and accelerating conditions of a turbocharged diesel engine. During the rapid acceleration period, the air injection into the intake manifold of turbocharged diesel engine indicates the improvement of the combustion characteristics and gas pressure in the cylinder. At low speed range of the engine, the effect of air injection shows the improvement of the pressure distribution of turbocharger and combustion pressure during the period of gas exchange pressure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1184-1189
• /
• 1990

In order to investigate liquid fuel filming over the intake manifold wall, an electrode-type probe has been developed by lines of authors and this probe was employed in a single cylinder two and four-stroke cycle engine and in a four cylinder four-stroke engine operated by neat methanol fuel. The performance of the probe was dependent upon several parameters including the liquid fuel layer thickness, temperature, additive in the fuel, and electric power source (i.e., AC and voltage level) and was independent of other variables such as direction of liquid flow with respect to the probe arrangement. Several new findings from this study may be in order. The flow velocity of the fuel layer in the intake manifold of engine was about (if the air velocity in the steady state operation, the layer thickness of liquid fuel varied in both the circumferential and longitydinal directions. In the transient operation of the engine, the temporal variation of fuel thickness was determined, which clearly suggests that there was difference between fuel/air ratio in the intake manifold and that in the cylinder. The variation was greatly affected by the engine speed, fuel/air ratio and throttle opening. And the variation was also very significant from cylinder to cylinder and it was particularly strong different engine speeds and throttle opening.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.253-257
• /
• 2018

Exhaust gas from the combustion of automobiles adversely affects the human body and even pollutes the atmosphere. This study investigated the influence of exhaust gas change on intake manifold using the nozzle. First, the flow analysis was performed using the 3D flow analysis program. When the nozzle inlet air velocity increased, the average air velocity in the nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$ increased 37.3% and 31.9% respectively at the intake manifold outlet. As the nozzle inlet air velocity increased, the maximum flow rate of air increased to 42.2% and 32.6%, respectively at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$. In order to verify the analysis results, experiments on the exhaust gas were performed in the engine simulation system. As the nozzle inlet velocity increased, HC values decreased by 42.4% and 31.4% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$, respectively. And CO values decreased by 40.7% and 31.1% at nozzle diameters of ${\Phi}2.5$ and ${\Phi}5$.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4718-4725
• /
• 2011

본 연구는 성능 해석을 통하여 1600cc급 흡기매니폴드의 흡기유량 및 분배특성에 대한 연구를 수행하였다. 일차원 엔진 성능해석 프로그램과 3차원 유동해석프로그램을 이용하여 해석을 수행하였다. 흡기 매니폴드의 정상상태 유동해석을 수행한 결과, 일차원 유동해석과 3차원 유동해석의 유량계수 표준편차는 1% 미만으로 우수한 분배특성을 나타내었다. 일차원 해석 결과가 3차원 결과 대비 미소하게 증가된 결과를 보였지만 동등한 유량계수 경향성을 나타냈다. 비정상상태 해석은 분배특성 측면에서 정상상태 해석 결과와 유사한 결과를 보였으며, 정상상태 해석결과를 통한 비정상상태 분배특성의 예측이 가능함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.166-172
• /
• 1998

In contrast to the conventional intake manifold of steel or aluminum material, the lst natural frequency range of plastic intake manifold becomes very lower to ca. 40Hz. That causes negative effects on the engine control unit installed inside the throttle body. In this paper, support design concepts to increase the natural frequency range larger than max. 200Hz are suggested based on the vibration analysis results using finite-element method. In conclusion, it is shown that the vibration level can be reduced most effectively by the installation of the neck support bracket between the throttle body and the plenum chamber.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.833-838
• /
• 2011

Future powertrain technologies will be developed focused on applications of eco-friendly technology for internal combustion engine, electric vehicle and Fuel Cell Electric Vehicle. But it is expected that these cutting edge technologies will not be applied immediately due to lack of infrastructure, technical and economical reasons. Therefore, numerous developments of internal combustion engine will be carried out for the time being. There have been many turbo engine developments undergoing to maximize the engine performance using turbo charger system in accordance with global trend-green technology and downsizing of engine which coincides with HMC's future development strategy. This study reviews the development process and result of plastic intake manifold module which is firstly developed for turbo engine. CAE simulation and experiments were implanted to evaluate design validity.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.579-584
• /
• 2005

Unsteady state free natural gas jets injected from several types of injectors were numerically simulated. Simulations showed good agreements with the schlieren experimental results. Moreover, injections of natural gas in intake manifolds of a single-valve engine and a double-valve engine were predicted as well. Predictions revealed that large volumetric injections of natural gas in intake manifolds led to strong impingement of natural gas with the intake valves, which as a result, gave rise to pronounced backward reflection of natural gas towards the inlets of intake manifolds, together with significant increase in pressure in intake manifold. Based on our simulations, we speculated that for engines with short intake manifolds, reflections of the mixture of natural gas and air were likely to approach the inlets of intake manifolds and subsequently be inbreathed into other cylinders, resulting in non-uniform mixture distributions between the cylinders. For engines with long intake manifolds, inasmuch as the degrees of intake interferences between the cylinders were not identical in light of the ignition sequences, non-uniform intake charge distributions between the cylinders would occur.