• The korean journal of orthodontics
• /
• v.17 no.2
• /
• pp.289-297
• /
• 1987

For the comparisons of dental archs and crowdings between musical wind instrument players groups and non-wind instrument players groups, 64 male wind instrument players and 31 non-wind instrument players group were selected. The results of the measurements were as follow. 1 Upper intercanine widths, upper basal arch widths, lower basal arch widths were statistically significant between musical wind instrument players groups (Class A, Class B) and non-wind musical instrument players group. 2 The mean value of upper intercanine width m Class A ($373{\pm}2.3mm$) was greater than than in Class B ($362{\pm}17mm$) and non-wind musical instrument players group($360{\pm}16mm$) 3 The mean value of lower basal arch width m Class B ($422{\pm}25mm$) was greater than that in non wind instrument players group ($395{\pm}28mm$). 4 The differences in the mean values of crowdings between Class A and Class Band non-wind instrument players group were not statistically significant.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.31-37
• /
• 1988

A phase different method to evaluate the instrument error of roundness measuring instrument and the form error of specimens for the calibration of the instrument is used. An instrument with a rotary table supported by an air bearing was calibrated by using the standard balls as a standard. The calibration was carried out repeatedly by setting the same ball in 12 phase angles(per 30.deg.) on the table and by recording their roundness errors with a magnification of 100,000 times. As a result of data analysis of all the observations, readout at each of 144 orientations(per 2.5.deg.) from recorded data file, the error of performance of the instrument and the specimens are separated. In the particular instrument used in the present experiment, the error of the instrument was determined with the accuracy of 0.0164 (.mu.m) and the form error of the specimens was determined with the accuracy of 0.0264,0.0172(.mu.m), respectively. If the instrument was calibrated by using the above specimens, then the accuracy of the measurement of roundness error can be improved to about 0.017 (.mu.m).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.75-80
• /
• 2008

This paper presents a new precision moving instrument for the displacement and direction control using the uni-morph type PZT actuator. The instrument is composed of the two-body and a link. The body has the uni-morph type PZT actuator, which make the vibration. Movement of simple moving instrument is generally analyzed by the theory of center-of-gravity moment. However the analysis of the instrument in this paper is focused the resonance of instrument. Resonance of the body is originated a uni-morph type PZT actuator that is vibrated by voltage and frequency. The basic performances of one body instrument are analyzed by the FEM analysis. And experiments are also performed to confirm the linear movement of the instrument and direction control. it is proper a voltage control than a frequency control for the direction changing. And Moving velocity is 0.032m/s.

• Biomedical Science Letters
• /
• v.22 no.4
• /
• pp.115-126
• /
• 2016

Audiometric calibration is a prerequisite for securing the reliability of audiometric test results by checking the internal consistency of the relevant instrument. The purpose of this review is to help instrument operators understand the calibration procedure of aural acoustic immittance instrument which is frequently used for objective assessment. By referring to the latest international standards and the national standards relevant to the aural acoustic immittance instrument, the following parameters will be reviewed: 1) introduction of performance characteristics, 2) detailed procedure of the calibration method. According to the newest international and national standards [IEC 60645-5 (2004), ANSI S3.39-1987 (R2012)], the aural acoustic immittance instrument basically includes six components: 1) calibration cavity, 2) acoustic immittance analysis system, 3) probe assembly/unit and signal, 4) pneumatic air-pressure pump system, 5) acoustic reflex activator system and 6) tympanogram and acoustic reflex plotting system, each of these components should meet set standards. The result of behavioral hearing tests is influenced by various complex factors including the examinee's cooperation, background noise of the examination room, measurement method, skill level of the audiologist and calibration status, but the objective hearing tests is more influenced by the calibration status of the instrument than any other factors. The audiologist should take full responsibility for the reliability of the hearing test result, so he/she should carry out the calibration check and adjustments of aural acoustic immittance instrument periodically and maintain the instrument continuously by referring to the newest standards and the manufacturer's instruction manual.

• Journal of Oriental Neuropsychiatry
• /
• v.22 no.1
• /
• pp.25-35
• /
• 2011

Objectives : This case series was conducted to report the efficacy of traditional Korean medicine treatments for Hwa-Byung. Methods : Patients were diagnosed with Hwa-byung through Hwa-Byung diagnostic interview schedule(HBDIS). instrument of pattern identification for Hwa-Byung was applied to develop an individualized traditional Korean medicine treatment plan. SCL-90-R, STAI, STAXI, BDI, and instrument of oriental medical evaluation for Hwa-Byung were measured. After 2 weeks of tradiational Korean medicine treatments and K-MBSR practice, STAI, STAXI, BDI, and instrument of oriental medical evaluation for Hwa-Byung were re-assessed to determine the progress of Hwa-Byung. Results : After treatments, chief complaints have improved. STAI, STAXI, BDI and instrument of oriental medical evaluation for Hwa-Byung score have decreased. Conclusions : According to the study, traditional Korean medicine treatments using instrument of pattern identification for Hwa-Byung have shown positive results in managing Hwa-Byung symptoms evaluated by instrument of oriental medical evaluation for Hwa-Byung.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.109-114
• /
• 1997

In the past few decades, the measuring instrument industries have made rapid progress with increase on the demand in industries such as precision instrument, chemistry, electronics, industrial measurement and automobile. Thus, development strategy and technical advancement are required for both securing the competitiveness on products in the world market and industrial development. Intensifying competitiveness of measuring instrument is needed in the world market. It can be achieved by development of measuring instrument holding comparative priority. A development strategy should be drawn up in the long-term point of view for coping with the increasing demand of measuring instrument and securing competitiveness in the world market.

• Journal of Korean Academy of Nursing
• /
• v.41 no.4
• /
• pp.510-519
• /
• 2011

Purpose: The purposes of this study were to identify the factors influencing service quality in nursing homes, and to develop an evaluation instrument for service quality. Methods: A three-phase process was employed for the study. 1) The important factors to evaluate the service quality in nursing homes were identified through a literature review, panel discussion and focus group interview, 2) the evaluation instrument was developed, and 3) validity and reliability of the study instrument were tested by factor analysis, Pearson correlation coefficient, Cronbach's ${\alpha}$ and Cohen's Kappa. Results: Factor analysis showed that the factors influencing service quality in nursing homes were healthcare, diet/assistance, therapy, environment and staff. To improve objectivity of the instrument, quantitative as well as qualitative evaluation approaches were adopted. The study instrument was developed with 30 items and showed acceptable construct validity. The criterion-related validity was a Pearson correlation coefficient of .85 in 151 care facilities. The internal consistency was Cronbach's ${\alpha}$=.95. Conclusion: The instrument has acceptable validity and a high degree of reliability. Staff in nursing homes can continuously improve and manage their services using the results of the evaluation instrument.

• Journal of Korean Academy of Nursing
• /
• v.38 no.4
• /
• pp.629-638
• /
• 2008

Purpose: This was a methodological research to develop an instrument to assess the emotional response of family members of physically restrained patients. Methods: A primary instrument with 68 questions was developed based on literature review and semi-structured interviews with family members. A group of experts revised individual questions and removed 4 irrelevant questions. This secondary instrument, then, was tested with 199 family members of physically restrained patients in intensive care units of a university hospital. The validity and reliability of the instrument were tested by factor analysis. Results: After item analysis, 3 questions with a correlation coefficient under .30 were discarded and the questions with a factor loading under .45 on Varimax Rotation were also removed. After factor analysis on the final 37 questions, 7 factors were identified; avoidance, shock, helplessness, grudge, depression, anxiousness, and acceptance. The total variance explained was 55.63%. The reliability of this instrument was 0.93 of Cronbach's alpha. Conclusion: This instrument was statistically reliable and valid to measure family's emotional response to physical restraints of the patients. This instrument can be useful in assessing the effects of nursing interventions for family members of restrained patients.

• The Korean Journal of Health Service Management
• /
• v.7 no.4
• /
• pp.33-47
• /
• 2013

The purpose of this study is to identify the important factors of education service quality and to develop the evaluation instrument in learning facilities for care workers. This study was processed as four steps. First, the important factors were confirmed through literature reviews and the expert board discussions. Second, the evaluation instrument was developed and validity & reliability of the instrument were checked by factor analysis and Cronbach's ${\alpha}$. Lastly, the instrument was rechecked by the expert board in language usages and importance of the items. The results indicated that the important quality factors were divided with infrastructure and service process. Especially, the process contained providing appropriate education information & counseling, providing appropriate contract & paying fees, keeping specified service principles and so on. The study instrument was developed with 28 items. This instrument will be helpful to improve the education service quality. Besides, the staffs must continuously try to improve and manage their education services using the results of this kind of evaluation instrument.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.862-874
• /
• 1989

A phase evil method and spectrum analysis were instrument error which is originated from measurement system and the form error of standard specimens. An instrument with a rotating table supported by an air bearing is calibrated using standard specimens. The phase of standard specimens was measured 12 times on the rotating table with rotating 30 in turn and its measurement magnification was set by 100000 times. As a result of data analysis of all the observations, read out at each of 144 orientations(per 2.5) from recorded datafiles, the error of the performance of the instrument and those of the standard specimens are evaluated and a systematic deviation of the instrument is determined. In the particular instrument used in the present experiment, the deviation of the instrument is determined with the accuracy of 15nm and those of standard specimens with the accuracy of 23, 13 n, respectively. The reproducibility of the instrument is investigated, too. If the instrument is calibrated by using the above standard specimens, then the accuracy of the measurement of roundness error can be improved to about 15nm.