• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.487-494
• /
• 2013

In this study, solutions for a liquid pool spreading model with continuous and instantaneous release are discussed based on the model used in the FERC's report. The effects of the release time on the liquid pool volume and radius are investigated for the continuous release. For the continuous release with the frictional resistance force in the liquid pool spreading model, the vaporization time decreases as the release time increases. On the other hand, for the continuous release without the frictional resistance force in the liquid pool spreading model, the vaporization time increases as the release time increases. These phenomena are deeply related to the pool radius. In addition, the effects of the initial pool radius for the instantaneous release in the liquid pool spreading model are discussed. For the case with the frictional resistance force in the liquid pool spreading model, as reducing release time in the model with the frictional resistance force for the continuous release, the solution for a continuous release approaches to that for an instantaneous release. On the contrary to this, the pool volume and radius for the instantaneous release without the frictional resistance force are totally different from those for the continuous release without the frictional resistance force.

• 에너지공학
• /
• 제23권4호
• /
• pp.41-48
• /
• 2014

지금까지 관행적으로 액체의 누출은 순간누출과 연속누출로 분류 되어 왔다. 본 논문에서는 이러한 분류의 문제점을 인식하고 새로운 분류 방법을 찾기 위하여 제한된 시간 동안 누출되는 극저온 액체의 확산에 관한 연구를 수행하였다. 이러한 물리적 현상은 누출된 액체풀의 부피, 반경, 높이에 관한 연립방정식에 의해 지배되며, 주요 변수는 단위면적당 증발률, 누출시간, 누출량의 3 개 이다. 섭동법에 의한 해를 효율적으로 구하기 위하여 독립된 형태의 부피에 관한 2차 미분방정식을 얻었다. 이 새로운 지배 방정식은 기존의 방법에 비하여 매우 간단하게 해를 얻을 수 있게 한다. 섭동해의 결과, 동일한 누출량인 경우에 누출시간이 작으면 연속누출이 순간누출로 이어지는 혼합 형태의 누출이 되나, 누출시간이 크게 되면 연속누출 형태로만 존재하게 된다. 동일한 누출시간의 경우에는 누출량이 작으면 연속누출 형태로만 존재하지만, 누출량이 증가할수록 혼합형태의 누출로 된다. 이러한 2개의 영역을 분할하는 경계를 섭동해를 이용하여 해석적으로 제시함으로서 누출의 새로운 분류에 대한 명확한 근거를 제시 하였다.

• 오토저널
• /
• 제4권2호
• /
• pp.58-68
• /
• 1982

It is well known to diesel engineers that the heat release pattern is one of the most important factors affecting engine performance. Thorough research in heat release pattern has materially helped the progress in high-speed diesel engine development . This paper is based on the research conducted at KAIST and Daewoo Heavy Industry last year. The purpose of this paper is to determine the heat release pattern in combustion chamber of MAN M type, the famous low-noise engine. Thermodynamic cycle simulation was performed using Whitehous-Way's heat release pattern with modified coefficients and Annand's heat transfer model. Instantaneous temperature and pressure of gas in cylinder could be determined by the numerical solution of simultaneous equation of mass conservation, equation of energy conservation, and state equation of ideal gas. Calculated results were compared with measured values in some details emphasizing upon the factors affecting rate of heat release. The agreement was fairly good and revealed why M type should have lower burning velocity at the early part of combustion in spite of high injection rate. Additional results by parametric studies were given in relation to fuel injection conditions for further application to engine development.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1222-1233
• /
• 1990

본 연구에서는 급속압축장치에서 실현된 단발분무하염내의 매연을 레이저음영 사진법에 의하여 가시화하고, 화염내의 매연농도의 시간적, 공간적분포를 조사한다. 또 전보에서 측정된 비증발분무내의 당량비분포와 비교검토하여 디젤화염내의 매연 생 성기구를 고찰하고, 분위기조건에 따른 착화지연이 매연생성에 미치는 영향 및 매연생 성과 열발생율과의 관계를 밝힌다.

• 한국분무공학회지
• /
• 제8권4호
• /
• pp.9-16
• /
• 2003

The Purpose of this study is to investigate the relationships between the local heat release rate and CH concentration have been investigated by numerical simulations of methane-air premixed flames. And simultaneous CH and OH PLIF(Planar Laser Induced Fluorescence) measurement has been also conducted for lean premixed flame as well as for laminar flames. Numerical simulations are conducted for laminar premixed flames and turbulent ones by using PREMIX in CHEMKIN and two dimensional DNS code with GRI mechanism version 2.11, respectively. In the case of laminar premixed flame, the distance between the peak of heat release rate and that of CH concentration is under $91{\mu}m$ for all equivalence ratio calculated in present work. Even for the premixed flame in high intensity turbulence, the distribution of the heat release rate coincides with that of CH mole fraction. For CH PLIF measurements in the laminar premixed flame burner, CH fluorescence intensity as a function of equivalence ratio shows a similar trend with CH mole fraction computed by GRI mechanism. Simultaneous CH and OH PLIF measurement gave us useful information of instantaneous reaction zone. In addition, CH fluorescence can be measured even for lean conditions where CH mole fraction significantly decreases compared with that of stoichiometric condition. It was found that CH PLIF measurements can be applicable to the estimation of the spatial fluctuations of heat release rate in the engine combustion.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.490-497
• /
• 1998

An elast-biscoplastic finite element analysis is performed to investigate detailed growth behavior of creep cracks and the numerical results are compared with experimental results. The results of mesh translation method are compared with those of node release method. Load line displancement curve obtained from the crack growth analysis by mesh translation shows the improved results than that obtained from the crack growth by node release method when the secondary creep rate is only used as creep material property. The results of accounting for primary creep rate and instantaneous plasticity shows a good agreement with the experimental result.

• 한국안전학회지
• /
• 제37권2호
• /
• pp.1-9
• /
• 2022

Most factories deal with toxic or flammable chemicals in their industrial processes. These hazardous substances pose a risk of leakage due to accidents, such as fire and explosion. In the event of chemical release, massive casualties and property damage can result; hence, quantitative risk prediction and assessment are necessary. Several methods are available for evaluating chemical dispersion in the atmosphere, and most analyses are considered neutral in dispersion models and under far-field wind condition. The foregoing assumption renders a model valid only after a considerable time has elapsed from the moment chemicals are released or dispersed from a source. Hence, an initial dispersion model is required to assess risk quantitatively and predict the extent of damage because the most dangerous locations are those near a leak source. In this study, the dispersion model for initial consequence analysis was developed with three-dimensional unsteady advective diffusion equation. In this expression, instantaneous leakage is assumed as a puff, and wind velocity is considered as a coordinate transform in the solution. To minimize the buoyant force, ethane is used as leaked fuel, and two different diffusion coefficients are introduced. The calculated concentration field with a molecular diffusion coefficient shows a moving circular iso-line in the horizontal plane. The maximum concentration decreases as time progresses and distance increases. In the case of using a coefficient for turbulent diffusion, the dispersion along the wind velocity direction is enhanced, and an elliptic iso-contour line is found. The result yielded by a widely used commercial program, ALOHA, was compared with the end point of the lower explosion limit. In the future, we plan to build a more accurate and general initial risk assessment model by considering the turbulence diffusion and buoyancy effect on dispersion.

• 한국항만학회지
• /
• 제9권1호
• /
• pp.45-56
• /
• 1995

Investigation of the physical behavior of dredged material disposal in coastal water includes estimations of water column concentration in the receiving water, exposure time, the initial deposition pattern as well as thickness of material at the dumping fields near the estuary area. Calculation based on vertical setting and horizontal advection of single particles ignore the effects of bulk properties of the disposed material, vertical and horizontal diffusion, and material dilution due to the entrainment of ambient water during descent. This paper focuses on the spatial and temporal changes in the dumping fields for the water column and bottom at a hypothetically confined coastal water, where the ambient time-invariant velocity and density profiles are applied, within the initial time period following the instantaneous release of the dredged material. This model accounts the behavior of material after release divided into three phases: convective descent, dynamic collapse and long-term passive dispersion

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.125-137
• /
• 2019

The purpose of this paper is to study the source term behavior after severe accidents by using a semi-kinetic model for simulation and calculation of in-containment activity. The reactor containment specification and the safety features of the containment under different accident conditions play a great role in evaluating the in-containment activity. Assuming in-vessel and instantaneous release of radioactivity into the containment, the behavior of in-containment isotopic activity is studied for noble gasses (Kr and Xe) and the more volatile elements of iodine, cesium, and aerosols such as Te, Rb and Sr as illustrative examples of source term release under LOCA conditions. The results of the activity removal mechanisms indicates that the impact of volumetric leakage rate for noble gasses is important during the accident, while the influence of deposition on the containment surfaces for cesium, mainly iodine isotopes and aerosol has the largest contribution in removal of activity during evolution of the accident.

• 대한토목학회논문집
• /
• 제9권3호
• /
• pp.65-73
• /
• 1989

응력파의 영향을 받는 균열의 동적응력확대계수를 구하기 위해 동적에너지방출율에 관한 명시적인 표현식을 유도하고, 이를 이용하여 유한요소법에 적합한 수치계산방법을 제시한다. 새로운 운동학적 기술방법과 균열의 가상증분을 이용하여 균열선단의 유한한 영역에서 정의되는 체적적분식을 연속체 역학적인 정식화를 통하여 구하고, 이의 수치적분 유한영역의 모델링에 사용된 등매개변수특이요소 내에서 특이성을 만족하는 적합조건하에서 수행된다. 본 방법은 경로적분식을 이용하는 기존 방법들에 비해 보다 정확하고 안정된 결과를 제공하고 동시에 응력파의 영향을 적시에 조사할 수 있으며, 본 방법에 의해 개발된 유한요소모듈은 기존의 동적응력 해석프로그램에 용이하게 연결 설치할 수 있음을 보인다.