• Journal of Astronomy and Space Sciences
• /
• 제28권4호
• /
• pp.261-265
• /
• 2011

We investigate the sunspot area data spanning from solar cycles 1 (March 1755) to 23 (December 2010) in time domain. For this purpose, we employ the Hilbert transform analysis method, which is used in the field of information theory. One of the most important advantages of this method is that it enables the simultaneous study of associations between the amplitude and the phase in various timescales. In this pilot study, we adopt the alternating sunspot area as a function of time, known as Bracewell transformation. We first calculate the instantaneous amplitude and the instantaneous phase. As a result, we confirm a ~22-year periodic behavior in the instantaneous amplitude. We also find that a behavior of the instantaneous amplitude with longer periodicities than the ~22-year periodicity can also be seen, though it is not as straightforward as the obvious ~22-year periodic behavior revealed by the method currently proposed. In addition to these, we note that the phase difference apparently correlates with the instantaneous amplitude. On the other hand, however, we cannot see any obvious association of the instantaneous frequency and the instantaneous amplitude. We conclude by briefly discussing the current status of development of an algorithm for the solar activity forecast based on the method presented, as this work is a part of that larger project.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.279-286
• /
• 2006

A method for estimating the instantaneous phasor of a fault current signal is proposed for high-speed distance protection that is immune to a DC-offset. The method uses a modified notch filter in order to eliminate the power frequency component from the fault current signal. Since the output of the modified notch filter is the delayed DC-offset, delay compensation results in the same waveform as the original DC-offset. Subtracting the obtained DC-offset from the fault current signal yields a sinusoidal waveform, which becomes the real part of the instantaneous phasor. The imaginary part of the instantaneous phasor is based on the first difference of the fault current signal. Since a DC-offset also appears in the first difference, the DC-offset is removed trom the first difference using the results of the delay compensation. The performance of the proposed method was evaluated for a-phase to ground faults on a 345kV 100km overhead transmission line. The Electromagnetic Transient Program was utilized to generate fault current signals for different fault locations and fault inception angles. The performance evaluation showed that the proposed method can estimate the instantaneous phasor of a fault current signal with high speed and high accuracy.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.378-386
• /
• 2023

A wideband instantaneous frequency measurement (IFM) system is been proposed, designed and analyzed. Phase modulation to intensity modulation conversion is implemented based on the stimulated Brillouin scattering (SBS) effect, and the microwave frequency can be measured by detecting the change in output power. Theoretical analysis shows that the frequency measurement range can be extended to 4f_b by adjusting the two sweeping signals of the phase modulators with a difference of 2f_b. The IFM system is set up using VPI transmission maker software and the performances are simulated and analyzed. The simulation results show that the measurement range is 0.5-45.96 GHz with a maximum measurement error of less than 9.9 MHz. The proposed IFM system has a wider measurement range than the existing SBS-based IFM system.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.45-50
• /
• 2000

The present study has been conducted to observe the heat transfer under pulsating pressure and oscillating flow. The experimental apparatus was fabricated to measure the gas temperature, the wall temperature. the pressure and the instantaneous heat flux inside the pulse tube. The measured gas temperature and heat flux must be calibarated to compensate their finite time constant in the oscillating flow conditious. The experiment was performed from 1 Hz to 5 Hz. The phase difference between the instantaneous heat flux and the gas-wall temperature difference was clearly observed. The experimental heat fluxes were compared to the theroretical correlations such as Complex Nusselt Number Model(CNNM) and Variable Coefficient Model(CVM). The heat flux predisted by CNNM was always greater than that of VCM. The experiment confirmed the valisity of the VCM for the instantaneous heat flux under the pulsating pressure and oscillating flow in the warm end of the pulse tube.

• 전자공학회논문지SC
• /
• 제45권6호
• /
• pp.141-148
• /
• 2008

신재생 에너지 분야에서 각광받고 있는 계통 연계형 태양광 인버터에서는 계통과의 연계를 위해서 반드시 계통의 위상 정보가 필요하다. 본 논문에서는 계통 연계형 태양광 발전 시스템에서의 위상 동기화 방법으로 원하는 기준 신호의 주파수를 구하여 동기신호로 사용하고, DFT(Discrete Fourier Transform) 알고리즘을 이용하여 기준 신호와의 위상차를 구하여 위상차만큼 보상하는 PLL(Phase Locked Loop)의 순시 추종방법을 제안하였다. 또한 DFT 연산에 사용되는 한주기 값들을 샘플링 할때마다 보정 위상 값을 구하는 방법과 특정 주파수의 기준신호에 대한 주파수 및 위상 추종뿐만 아니라 다양한 주파수 신호에 대한 주파수 및 위상을 추종하는 방법을 적용하여 시뮬레이션과 실험을 통해 본 논문의 타당성을 검증하여 유효성을 보이고자 한다.

• 한국전산유체공학회지
• /
• 제5권1호
• /
• pp.27-32
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The instantaneous location of the solid-liquid interface is fixed for all times by a coordinate transformation. Finite difference method is used to obtain the solution of the unsteady problem, and the growth rate of solid and the transient heat transfer from the surfaces of solid are investigated. The transient solution is dependent on the three dimensionless parameters, but the final steady state is determined by only one parameter of temperature ratio/conductivity ratio. It is observed that the instantaneous heat flux at the surface of solid can be obtained with sufficient accuracy by measuring the thickness of the solid or vice versa.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.655-659
• /
• 2001

Resident time of the continuous and Instantaneous centrifugal separator using that separates the light and heavy liquids by use of density difference is the orptical factor that affects significantly the chemical metial extraction and the productivity in the chemical and mechanical process. In this paper, the overflow of the device is investigated under consideration of the relationships between inclination angle of liquid feeding screw and the centrifugal force. From the design of the length of a centrifugal separator, the radiuses of rotor and housing, theoretical formulation on the contact radius of separation weir is established through the experiments. From the experiments, it is identified that how much the capacity of inlet impeller and the emulsion phenomenon depend on the screw angle of inlet impeller. Also, we investigate the separation condition and the resident times that are functions of the phase ratio and density.

• 한국추진공학회지
• /
• 제8권4호
• /
• pp.43-54
• /
• 2004

본 가시화 연구는 잠자리 유형 모델의 위상차에 관한 후류의 변화를 관찰함으로써 위상차 효과를 정성적으로 조사하기 위해 수행되었다. 본 가시화 실험에 사용된 잠자리 유형 모델은 잠자리의 날개 형상을 모방한 앞뒤 날개를 가진 쌍으로 구성되어 있으며, 잠자리의 플래핑 날개를 확대하여 제작하였다. 본 연구는 smoke-wire 기법을 통한 가시화 실험이 수행되었고, 정확한 날개위치각도를 찾기 위하여 동기화 조정장치가 사용되었다. 이때 날개위치각도의 불확실성은 약 $\pm$$1^{\cire}$정도이며, 순간 날개 위치각도는 $-16.5^{\cire}$에서 $22.8^{\cire}$까지 변한다. 본 실험은 앞ㆍ뒤 날개의 위상차가 $0^{\cire}$, $90^{\cire}$, $180^{\cire}$, $270^{\cire}$인 경우 수행되었다. 본 연구 결과 위상차 $90^{\cire}$, $180^{\cire}$, $270^{\cire}$에서는 Karman Vortex가 발생되지만, 위상차 $0^{\cire}$에서는 Karman Vortex 현상이 관찰되지 않는다.

• 지구물리
• /
• 제3권1호
• /
• pp.37-48
• /
• 2000

다성분 복소 트레이스 분석법을 이용하여 지진에 의한 지면운동을 밝히고자 컴퓨터 합성 탄성파 자료와 자연 지진 자료를 대상으로 파선방향의 입자운동을 분석하였다. 합성 탄성파 자료에 적용시킨 결과, 실체파 합성 부분에서는 도달시각, 지속시간, 접근각 등을 정확히 찾을 수 있으며, 레일리파도 쉽게 인지된다. 규모 7.3의 심발 지진 자료로부터 입자운동의 분극특성을 계산한 결과, 종파의 수직성분과 수평성분의 순간위상차, 순간역타원율, 접근각은 각각 약 ${\pm}180^{\circ},\;0{\sim}0.25,\;-30^{\circ}{\sim}-45^{\circ}$의 값을 가지며, 이러한 분극특성으로부터 진원시간함수는 $6{\sim}7\;s$ 정도 지속되는 것으로 분석된다. 횡파의 경우는 순간위상차가 일정하지 않으며, $0{\sim}0.3$의 순간역타원율과 거의 수직의 접근각을 나타낸다. 횡파 도달 직전에 기록된 비교적 저주파의 신호는 분극특성으로부터 횡파와는 구별되는 종파의 일종으로 해석된다. 종파와 횡파의 도달시각을 이용하여 구한 속도와 파선변수는 각각 8.633 km/s, 4.762 km/s와 0.074 s/km, 0.197 s/km이며 동포와송비는 0.281로 계산된다.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.182-187
• /
• 2015

In the three-phase power system, when any one-phase or two-phases is open-phase, the unbalanced current flows and the single-phase power supplies to three-phase loads. Specially, motor coil and transformer coil receive over-current. As a result, great damage as well as electrical fire can occur to the power system. In order to improve these problems, this paper proposes that an open-phase detection device is designed by a new algorithm using electric potential difference between the resultant voltage of neutral point and ground, and a control circuit topology of open-phase protector is composed of highly efficient semiconductor devices. It improves response speed and reliability. The control algorithm circuit also operates the cut-off of a conventional residual current protective device (RCD) which flows an enforced leakage current to ground wire at open-phase accident. Furthermore, time delay circuit is added to prevent the incapable operation of open-phase protector about instantaneous open-phase not open-phase fault. The time delay circuit improves more reliability.