• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.2
• /
• pp.46-58
• /
• 2023

Deterministic safety analysis is a crucial part of safety assessment, particularly when it comes to demonstrating the safety of nuclear power plant designs. The traditional approach to deterministic safety analysis models is to model the nuclear core using point kinetics. However, this simplified approach does not fully reflect the real core behavior with proper moderator and fuel reactivity feedbacks during the transient. The use of Multi-Physics approach allows more precise simulation reflecting the inherent three-dimensionality (3D) of the problem by representing the detailed 3D core, with instantaneous updates of feedback mechanisms due to changes of important reactivity parameters like fuel temperature coefficient (FTC) and moderator temperature coefficient (MTC). This paper addresses a CEA ejection accident at hot full power (HFP), in which the underlying strong and un-symmetric feedback between thermal-hydraulics and reactor kinetics exist. For this purpose, a multi-physics analysis tool has been selected with the nodal kinetics code, 3DKIN, implicitly coupled to the thermal-hydraulic code, RELAP5, for real-time communication and data exchange. This coupled approach enables high fidelity three-dimensional simulation and is therefore especially relevant to reactivity initiated accident (RIA) scenarios and power distribution anomalies with strong feedback mechanisms and/or un-symmetrical characteristics as in the CEA ejection accident. The Systems Engineering approach is employed to provide guidance in developing the work in a systematic and efficient fashion.

• Wind and Structures
• /
• v.38 no.5
• /
• pp.341-354
• /
• 2024

This paper presents a theoretical method to deal with the aerodynamic performance and pitch optimization of the horizontal axis wind turbine blades at low wind speeds. By considering a blade element, the functional relationship among the angle of attack, pitch angle, rotational speed of the blade, and wind speed is derived in consideration of a quasi-steady aerodynamic model, and aerodynamic loads on the blade element are then obtained. The torque and torque coefficient of the blade are derived by using integration. A polynomial approximation is applied to functions of the lift and drag coefficients for the symmetric and asymmetric airfoils respectively, where specific expressions of aerodynamic loads as functions of the angle of attack (which is a function of pitch angle) are obtained. The pitch optimization problem is investigated by considering the maximum value problem of the instantaneous torque of a blade as a function of pitch angle. Dynamic pitch laws for HAWT blades with either symmetric or asymmetric airfoils are derived. Influences of parameters including inflow ratio, rotational speed, azimuth, and wind speed on torque coefficient and optimal pith angle are discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.55-64
• /
• 1987

The schemes synthesizing the instantaneous unit hydrograph(IUH) are presented by using the geomorphologic parameters of a basin. To this end, the channels in the network are numbered according to the Strahler scheme, and the mathematical formulation corresponding to a dynamic probability theory for deriving the geomorphologic IUH(GUH) is refered to the existing techniques adopted by Rodriguez-Iturbe and Valdes. Also, the mean runoff velocity is applied for expressing a dynamic state of flow. The applicability of the GUH to the real drainage basins is tested by using the data observed in a few basins with areas of the order of 9.2, 20, 33.63, and $109.73km^2$ in Korea. The test is carried out by checking the discrepancies between the observed and simulated values for the peak discharge and its time of occurrence which are the most important parameters of an IUH by varing the mean runoff velocity and the inputs. As a result, good agreement is found between them, and it is shown that the variability in peak discharge of hydrograph depends on the mean runoff velocity more than the constant loss rate.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.4
• /
• pp.583-594
• /
• 2014

This study was performed to estimate biomass and provide management guidance through population ecological characteristics, including growth parameters, instantaneous coefficients of natural and fishing mortalities, and age at first capture of the starry flounder, Platichthys stellatus and olive flounder, Paralichthys olivaceus of Korea. For describing growth of this species, a von Bertalanffy growth model was adopted. The von Bertalanffy growth parameters estimated from a non-linear regression for starry flounder were $L_{{\infty}}=48.25cm$, K=0.16/yr, and $t_0=-1.48$, respectively and those for olive flounder were $L_{{\infty}}=86.46cm$, K=0.26/yr, and $t_0=-0.29$, respectively. Biomass of Platichthys stellatus was estimated by direct biomass estimation method was 2.6 M/T, that was estimated by indirect method was 13.4 M/Tt. Those of Paralichthys olivaceus were estimated as 10.1 M/T, 19.3 M/T, respectively. An yield per recruit analysis showed that the current yield per recruit on Platichthys stellatus was about 48.2 g with F=0.646/yr and the age at first capture ($t_c$) 1.35yr, that on Paralichthys olivaceus was about 167.6 g with F=1.121/yr and the age at first capture ($t_c$) 1yr.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.2 s.233
• /
• pp.169-179
• /
• 2005

Nucleate boiling experiments on heating surface of constant wall temperature were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition of heating surface and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames per second using a high-speed CCD camera synchronized with the heat flow rate measurements. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous experimental results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later (thermal) respectively. The comparisons showed good agreement in the initial and thermal growth regions. In the initial growth region including surface tension controlled, transition and inertia controlled regions as divided by Robinson and Judd, the bubble growth rate showed that the bubble radius was proportional to $t^{2/3}$ regardless of working fluids and heating conditions. And in the thermal growth region as also called asymptotic region, the bubble showed a growth rate that was proportional to $t^{1/5}$, also. Those growth rates were slower than the growth rates proposed in previous analytical analyses. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool condition. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.47-55
• /
• 2003

This paper proposes a composition method of mosaic image from the compressed MPEG-2 video stream, in which the displacement between successive frames according to the camera operation is estimated directly from the information involved in the stream. In the proposed method. the approximated optical flow is constructed from motion vectors of macro blocks, and it is used to determine the parameters of the displacements according to the camera operation associated with pan and tilt. The extracted parameters are used to determine the geometric transform of successive video frames in order to construct a mosaic image. The construction of mosaic uses several blending techniques including the one proposed by Nichols in which an analytic weight is used to determine pixel values. Through the experiment, the blending technique based on analytic weights was superior to the others such as averaging and median-based techniques. It provided more smooth changes in background and made use of instantaneous frame information to construct a mosaic. The mosaic in the paper puts the emphasis on the reduction of computation because it is constructed from the motion vectors included in the compressed video without decoding and recalculating exact optical flows. The constructed mosaic can be used in the retrieval of the compressed video as the representative frame of a shot.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.302-306
• /
• 1983

The changes in the mechanical model parameters during cooking and subsequent storage, were related to the sensory quality of the noodles. The sensory hardness and chewiness were tested by Milestone method and the overall preference was evaluated by hedonic scale test. Hardness was affected primarily by increasing cooking time and in lesser degree by storage time after cooking. Chewiness was diminished by increasing cooking time and subsequent storage. The preference of wheat flour noodle was not significantly affected by cooking time, while that of wheat·sweet potato starch noodle decreased significantly by excess cooking time. Instantaneous elasticity represented the softness of noodle. The elastic components and viscosity components had significant relationship with the sensory quality of wheat noodle. On the other hand the retardation time was important for the sensory quality of wheat-sweet potato starch noodle.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.29-38
• /
• 1985

In this paper we have designed and implemented in real time a simple, efficient and flexible AOPCM cosec using a high speed digital processor, NEC 7720. For ADPCM system, we have used an instantaneous adaptive quantizer and a first-order fixed predictor. The software for NEC 7720 has been developed and it was found that the NEC 7720 was capable of performing the entire ADPCAt algorithm for 4 channels in real time as optimizing the program. Computer simulation has born made to investigate a computational accuracr of NEC 7720 and to de-termine necessary parameters for a ADPCM codec. Real telephone speech, RC-shaped Gaussian noise and 1004 Hz tone signal were used for simulation. In simulation, the parameters werc optimized from the computed SNR and the informal listening test. The developed software was tested in real time operation using a hardware emulator for NEC 7720. It took a maximum 23.25$\mu$s to encode one sample and 113.5$\mu$s, including all the necessary 1/0 operations, to encode 4 channels. In the case of decoding process, it took 24.75$\mu$s to decode one sample and 119.5$\mu$s to decode 4 channels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.512-515
• /
• 2010

SIGINT(SIGnal INTelligence) includes several parameters intercepted by measurement and analysis of the RF(Radio frequency) signal from free space. One of the important parameters is frequency information. Expecially, in order to perform instantaneous frequency measurement of Radar and Missile seeker's RF signals, we use dedicated RF modules as a DFD(Digital Frequency Discriminator) to provide frequency information by measurement of the relative phase difference between signals via intended RF delay lines. It must measure and provide realtime based frequency information on short pulsed RF signal up to 100 nSec or less. This document proposes Ultra wideband DFD consisted of a RF input section of Wideband 4 channel RF delay line and correlator, a digital processing section to measure and provide frequency information from I/Q signal, and a frequency calibration section. Also, it will show design suitability based on test results measured under test condition of very short input pulse signals.

• Water for future
• /
• v.8 no.1
• /
• pp.61-79
• /
• 1975

An attempt is made to develope a scheme for synthesizing unit hydrograph for any arbitrary small watershed in the Han or Geum River basin, which can be applied in determining various sizes of design flood for flood control prijects. Stage gauging stations, seven in the Han and five in the Geun River basin with rating curves, were selected as subbasins for the analysis. Unit hydrographs of 2-hour duration were derived for several heavy storm events using the storm and the corresponding flood runoff data for each subbasin. The Clark method programmed by the Hydrologic Engineering Center, U.S. Corps of Engineers, was utilized for derivation of instantaneous unit hydrographs which were, in turn, converted into 2-hour unit hydrograph. By averaging the 2-hour unit hydrographs from several storm events a representative 2-hour unit hydrograph was determined for each subbasin and hence a separate derivation of dimensionless unit hedrograph was also possible for the Han and Geum River basins. The physiographic characteristics such as stream length, distance to the centroid of each watershed were correlated with the characteristic parameters of the derived unit hydrograph for the subbasins within two large basins. correlation analyses between the characteristic parameters were also made. These correlation analyses resulted a series of four equations and a dimensionless unit hydrograph for the two large basins, which made it possible to draw a synthetic 2-hour unitgraph for any small watershed within the Han or Geum River basin. A detailed procedure for aplying the derived method for an arbitrary basin is summarized with one sample computation for each of the two basins. A comparison of the actually derived 2-hour unit hydrogrograph and the synthesized one showed a fair agreement. A recommendation is made for the further study.