• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.268-276
• /
• 1992

In this paper, we present an discrimination method of unknown digital modulated signals in noisy communication environment. We propose the use of an identification procedure based on time domain signal parameters. First, We extract instantaneous envelope. Frequency and difference phase as the basic feature informations from received signals. In order to identify signals using the extracted feature informations, we design the two dimensional feature space. The extracted feature infomations are mapped into2Dfeature space using 2D feature points. The procedure has been tested by simulations on a computer in noisy communication environment, and the considered signals are ASK-W, ASK-4, BPSK, QPSK, 8PSK, FSK, and QAM.

• Wind and Structures
• /
• v.10 no.1
• /
• pp.45-60
• /
• 2007

Transmission tower is a vital component in electrical system. In order to accurately compute the dynamic response and reliability of transmission tower under the excitation of wind loading, a new method termed as probability density evolution method (PDEM) is introduced in the paper. The PDEM had been proved to be of high accuracy and efficiency in most kinds of stochastic structural analysis. Consequently, it is very hopeful for the above needs to apply the PDEM in dynamic response of wind-excited transmission towers. Meanwhile, this paper explores the wind stochastic field from stochastic Fourier spectrum. Based on this new viewpoint, the basic random parameters of the wind stochastic field, the roughness length $z_0$ and the mean wind velocity at 10 m heigh $U_{10}$, as well as their probability density functions, are investigated. A latticed steel transmission tower subject to wind loading is studied in detail. It is shown that not only the statistic quantities of the dynamic response, but also the instantaneous PDF of the response and the time varying reliability can be worked out by the proposed method. The results demonstrate that the PDEM is feasible and efficient in the dynamic response and reliability analysis of wind-excited transmission towers.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1334-1344
• /
• 2014

A novel single phase Phase-Locked Loop (PLL) is proposed in this paper to accurately and rapidly estimate the instantaneous phase angle of a grid. A conjugate rotating vector pair is proposed and defined to synthesize the single phase signal in the stationary reference frame. With this concept, the proposed PLL innovatively sets one phase input of the PARK transformation to a constant zero. By means of a proper cancellation, a zero steady state phase angle estimation error can be achieved, even under magnitude and frequency variations. The proposed PLL structure is presented together with guidelines for parameters adjustment. The performance of the proposed PLL is verified by comprehensive experiments. Satisfactory phase angle estimation can be achieved within one input signal cycle, and the estimation error can be totally eliminated in four input cycles for the most severe conditions.

• Journal of the korean society of oceanography
• /
• v.34 no.4
• /
• pp.200-206
• /
• 1999

Seawater sampling is the primary task for the study of the marine environmental parameters that require shipboard or laboratory experiments for their analyses, and is also required for the calibration of some instruments for in situ measurement. A new automatic bottle (AUTTLE) is developed for seawater sampling at any desired time and water depth by self-triggering. Both any type of single or assembled mooring for 15 days and manual actuation by using a remote messenger as existing instantaneous single point water samplers are possible. Its sampling capacity and the resolution of time setting are 2 liters and 1 second, respectively. The result of a field experiment with an optical backscattering sensor (OBS) and a total of 14 AUTTLES for the in situ calibration of the OBS shows that the AUTTLE must improve our understanding on the behavior of the sand/mud mixtures in the environments with high waves and strong tides. The AUTTLE will serve as a valuable instrument in the various fields of oceanography, especially where synchronized seawater sampling at several sites is required and/or the information in storm period is important.

• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.189-197
• /
• 2008

In order to develop the sustainable ecological management, short-necked clams, Ruditapes philippinarum, were collected from Yoengi coast in Tongyoeng, Korea. The growth of the clam was estimated as: $L_f=68.08{\cdot}(1-e^{-0.145(t+0.324)})$ from ring radius composition of shell. Instantaneous co-efficiency of total mortality and natural mortality were calculated as: 0.991/year and 0.494/year, respectively. The age of the clams from the first capture was estimated to be 3.28. The total biomass was estimated to be 212 MT in the fisheries area (6.4 ha). Applied by these parameters, the annual recruit biomass and the current yield per recruit were calculated to be 649.5 individual/$m^2$ and $0.7\;g/m^2$, respectively. The current fishing intensity was much lower for maximum sustainable yield and acceptable biological catch. Although higher yield per recruit could be achieved by increasing fishing intensity, it is favorable to retain the current fishing intensity because of the unique fishing attitude on Yeongi coast in Tongyoeng, Korea.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.245-268
• /
• 2012

Results of isothermal torsional oscillation tests are reported on melts of linear low density polyethylene and isotactic polypropylene. Prior to rheological tests, specimens were annealed at various temperatures ranging from $T_a$ = 180 to $310^{\circ}C$ for various amounts of time (from 30 to 120 min). Thermal treatment induced degradation of the melts and caused pronounced decreases in their molecular weights. With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts. A melt is treated as an equivalent network of strands bridged by junctions (entanglements and physical cross-links). The time-dependent response of the network is modelled as separation of active strands from and merging of dangling strands with temporary nodes. The stress-strain relations involve three adjustable parameters (the instantaneous shear modulus, the average activation energy for detachment of active strands, and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. The study focuses on the effect of molecular weight of polymer melts on the material constants in the constitutive equations.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.625-632
• /
• 2000

This paper proposes an adaptive multislot allocation algorithm in order to achieve large system capacity and higher throughput data transmissions. The proposed system is the combination of the slow adaptive modulation system, in which the base station dynamically a signs optimum modulation parameters measuring the CNR(carrier to noise power ratio) of each transmission terminal, and the multislot allocation scheme, in which the base station flexibly allocates an appropriate number of TDMA data slots according to the instantaneous load conditions. Computer simulations confirm that the proposed system can tremendously improve average message delay characteristics in comparison with the conventional fixed slot allocation method.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.1
• /
• pp.52-60
• /
• 1991

This paper describes the study on isolated word recognition by using DHMM(Dynamic Hidden Markov Model) which has dynamic feature of spectrum as a parameter. This paper discusses speech recognition experiment basedon HMM which can evaluate not only instantaneous spectral features but also dynamic spectral features. LPC cepstrum parameters is used as a static feature and LPC cepstrum's regression coefficient is used as a dynamic feature. These two features are quantized by each VQ codebook. DHMM is modeled by receiving static vector and dynamic vector by input. In the whole experiment, as recognition experiment using DHMM shows 92.7% of recognition rate while the experiment using conventional HMM shows 88.8% of recognition rate, DHMM proved to be a useful model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1241-1246
• /
• 2005

This paper proposes an adaptive multislot allocation algorithm in order to achieve larger system capacity and higher throughput data transmissions. The proposed system is the combination of the slow adaptive modulation system, in which the base station dynamically assigns optimum modulation parameters measuring the SNR of each transmission terminal, and the multislot allocation scheme, in which the base station flexibly allocates an appropriate number of TDMA data slots according to the instantaneous load conditions. Computer simulations confirm that the proposed system can tremendously improve average message delay characteristics in comparison with the conventional fixed slot allocation method.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.1-14
• /
• 1998

Underwater explosion properties for TNT, an ideal explosive, and DXD-04, a nonideal explosive, were numerically modeled with a one-dimensional Lagrangian hydrodynamic code. The equation of state parameters for detonation products for TNT and DXD-04 were obtained from the BKW code, assuming complete reaction. Burn of TNT was modeled by using the Chapman-Jouguet(CJ) volume burn technique, a programmed-burn technique, assuming instantaneous detonation reaction. Burn of DXD-04 was modeled by using the same technique and by using the reaction rate calibrated from two-dimensional steady-state detonation experiments. The calculations for TNT reproduced the experimental peak pressure of the shock wave propagating through water with an error of $3.0\%$ and the experimental oscillation period of the bubble formed of detonation products with an error of $2.3\%$. For DXD-04, the CJ volume burn technique could not reproduce the experimental observations. When the reaction rate calibrated from two-dimensional steady-state detonation experimental data, the calculated peak pressure was slightly higher by $7.3\%$ than the experimental data, but the calculated shock profile was in good agreement. The bubble period was reproduced with an error of $1.8\%$. These results demonstrated that underwater explosion properties for an ideal explosive can be predicted by using a programmed burn technique, and that, however, those for a nonideal explosive can be predicted only when a well-calibrated reaction rate is used.