• Wind and Structures
• /
• 제37권1호
• /
• pp.57-78
• /
• 2023

In this study, a generalized three-degree-of-freedom (3-DoF) analytical model is formulated to predict linear aerodynamic instabilities of a prism under quasi-steady (QS) conditions. The prism is assumed to possess a generic cross-section exposed to turbulent wind flow. The 3-DoFs encompass two orthogonal horizontal directions and rotation about the prism body axis. Inertial coupling is considered to account for the non-coincidence of the mass center and the rotation center. The aerodynamic force coefficients-drag, lift, and moment-depend on the Reynolds number based on relative flow velocity, angle of attack, and the angle between the wind and the cable. Aerodynamic forces are linearized with respect to the static equilibrium configuration and mean wind velocity. Routh-Hurwitz and Liénard and Chipart criteria are used in the eigenvalue problem, yielding an analytical solution for instabilities in galloping and static divergence types. Additionally, the minimum structural damping and stiffness required to prevent these instabilities are numerically determined. The proposed 3-DoF instability model is subsequently applied to a conductor with ice accretion and a full-scale dry inclined cable. In comparison to existing models, the developed model demonstrates superior prediction accuracy for unstable regions compared with results in wind tunnel tests.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.179-188
• /
• 2011

본 연구에서는 합성가스-공기 화염의 셀 불안정성에 있어서 탄화수소 연료의 첨가효과를 알아보기 위하여 상온, 고압, 정적상태의 연소실에서 실험을 수행하였다. 층류화염전파속도는 상세반응기구와 전달물성치를 사용하여 계산하였고 이를 실험으로 측정된 값과 비교하였다. 탄화수소 연료가 첨가된 합성가스-공기 화염의 셀 불안정성은 수력학적 불안정성과 확산-열 불안정성의 관점에서 평가되며 희박예혼합 화염에 대해 실험으로부터 측정된 셀불안정성을 유발하는 임계 Peclet 수는 이론적으로 얻어진 값과 비교하였다. 실험결과는 반응혼합물에 탄화수소 계 연료의 첨가량이 증가할수록 화염전파속도는 감소함을 보였다. 합성가스-공기화염에 프로판과 부탄을 첨가하였을 경우 수력학적 불안정성과 확산-열 불안정성이 감소하여 셀 형성은 현저하게 감소하였다. 반면 메탄을 첨가하였을 경우 셀 불안정성이 완화되는 효과는 없었다.

• 천문학회보
• /
• 제24권2호
• /
• pp.106-106
• /
• 1999

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제19회 학술발표대회 논문초록집
• /
• pp.33-33
• /
• 2002

• 천문학회보
• /
• 제18권
• /
• pp.25.2-26
• /
• 1993

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 강연회 및 연구개발 발표회 논문집
• /
• pp.144-149
• /
• 1998

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.61-68
• /
• 2003

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.160-168
• /
• 2016

In high speed turbopumps, cavitation occurs and often causes the flow instabilities such as cavitation surge and rotating cavitation. The occurrence of these cavitation instabilities is considered to relate to dynamic characteristics of the cavitation, which are modelled using a cavitation compliance and a mass flow gain factor. Various types of cavitation such as a blade surface cavitation, a tip leakage vortex cavitation, and a backflow vortex cavitation occur at the same time in the inducer and the dynamic characteristics of each cavitation have not been clarified yet in experiments. Focusing on the blade surface cavitation as one of fundamental cavitation, we investigated the dynamic characteristics of the blade surface cavitation on a flat plate hydrofoil in experiments in the present study.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.40-54
• /
• 2009

Cavitation instabilities in turbo-machinery such as cavitation surge and rotating cavitation are usually explained by the quasi-steady characteristics of cavitation, mass flow gain factor and cavitation compliance. However, there are certain cases when it is required to take account of unsteady characteristics. As an example of such cases, cavitation surge in industrial centrifugal pump caused by backflow vortex cavitation is presented and the importance of the phase delay of backflow vortex cavitation is clarified. First, fundamental characteristics of backflow vortex structure is shown followed by detailed discussions on the energy transfer under cavitation surge in the centrifugal pump. Then, the dynamics of backflow is discussed to explain a large phase lag observed in the experiments with the centrifugal pump.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.99-118
• /
• 2017

ECHO progress was defined to depict the rotordynamic pump theory development. Experience (E) era for pumps lasted nearly one and a half hundred years before the Industrial Revolution due to the low rotation speed of motor and undeveloped manufacture ability. Classic (C) theory referring to quasi-static performance as well as the items those were not able to be steadily resolved under the level were briefly and sophisticated outlined. Since 1962, flow instabilities and the dynamic responses had come into main attention with the development of the modern technologies such as ballistic missile, rocket and space shuttle main engine, and were finally heuristically (H) elucidated by talented scholars and researchers. Recently, new applications for the pumps open (O) to the surrounding fluid and diversity of the medium such as multiphase flow need more studies and some examples were briefly introduced to display the potential problems lastly.