• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.146-148
• /
• 2002

An automatic inspection vision systems whose development was the industry applications motor rear side member. This system are connected to the 9 ea camera fur the process inspection the bolt, nuts, units in the rear side member product. This automatic inspection vision systems can perform inspection of not attached the bolt, nuts, units, etc fast and accuracy in react time fashion. And then perform very sophisticated inspection which human workers can not perform.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1099-1104
• /
• 2013

This paper presents a learning-based visual inspection method that addresses the need for an improved adaptability of a visual inspection system for parts verification in panorama sunroof assembly lines. It is essential to ensure that the many parts required (bolts and nuts, etc.) are properly installed in the PLC sunroof manufacturing process. Instead of human inspectors, a visual inspection system can automatically perform parts verification tasks to assure that parts are properly installed while rejecting any that are improperly assembled. The proposed visual inspection method is able to adapt to changing inspection tasks and environmental conditions through an efficient learning process. The proposed system consists of two major modules: learning mode and test mode. The SVM (Support Vector Machine) learning algorithm is employed to implement part learning and verification. The proposed method is very robust for changing environmental conditions, and various experimental results show the effectiveness of the proposed method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.22-28
• /
• 2019

In this study, we describe the mechanical design of the cylindrical workpiece inspection system which that can inspect the workpiece machined in the CNC lathe. The workpiece automatic measuring device is composed of a workpiece aligning mechanism, a workpiece diameter measuring mechanism, and a workpiece height measuring mechanism. If the workpiece machined on the CNC lathe is placed on the pedestal of the cylindrical workpiece inspection system, the workpiece aligning mechanism moves the workpiece to the diameter-measuring position and the height- measuring positions, and the diameter-measuring mechanism and the height- measuring mechanisms sequentially measure the diameter and the height of the workpiece. The cylindrical workpiece inspection system was designed and manufactured. The characteristic experiment was conducted to confirm the operation of the machine tool of the cylindrical workpiece inspection system. As a The result of the characteristic test shows that, the workpiece automatic measuring device operated safely.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.14-20
• /
• 2009

The goal of image processing is to improve the visual appearance of images for human viewers. The histogram is an important tool which can be used as basic data of digital image processing. Therefore, to effectively manage a histogram in digital image processing is very important. Currently machine vision systems are used in many appearance inspection fields instead of inspection by human. However, the appearance inspection result by machine vision system is mainly influenced by illumination of workplace. In this paper, we propose a histogram transform method for improving accuracy of machine visual inspection. The enhancement effect of area feature is obtained by performing proposed histogram transformation in area that needs improvement The proposed algorithm is verified by appearance inspection of jig plate samples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4115-4120
• /
• 2010

In manual inspection of Lead Screw of computers many workers are needed to inspect samples, and its main disadvantage is that such types of inspection system not only gives low production, but also gives low perfection. Besides, in manual inspection system, the inspection cost of samples is higher than that of the automatic inspection system. Therefore, in this study to compensate these shortcomings, an automatic inspection system is developed. For the inspection of the surfaces and different dimensional parameters of computer Lead screw, a $360^{\circ}$ rotating machine vision system is developed. From the detailed analysis of the inspection results using the present developed inspection system, it is observed that the developed Lead Screw automatic inspection system is superior to those of manually inspection system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.1 no.1
• /
• pp.13-23
• /
• 2001

Most current machine vision systems for industrial inspection were developed with one specific task in mind. Hence, these systems are inflexible in the sense that they cannot easily be adapted to other applications. In this paper, a general vision system framework has been developed that can be easily adapted to a variety of industrial web inspection problems. The objective of this system is to automatically locate and identify \\\"defects\\\" on the surface of the material being inspected. This framework is designed to be robust, to be flexible, and to be as computationally simple as possible. To assure robustness this framework employs a combined strategy of top-down and bottom-up control, hierarchical defect models, and uncertain reasoning methods. To make this framework flexible, a modular Blackboard framework is employed. To minimize computational complexity the system incorporates a simple multi-thresholding segmentation scheme, a fuzzy logic focus of attention mechanism for scene analysis operations, and a partitioning if knowledge that allows concurrent parallel processing during recognition.cognition.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.253-255
• /
• 2007

The increasing requirement for consistency and quality in the automotive industry started the development of a Machine Vision Inspection System (MVIS) for a car seat bottom cushion frame with the goal of providing a higher precision Inspection System with minimal components and less human intervention. The modifications made to an existing PC-based MVIS were shown to improve the accuracy and precision of the system. By using four monochrome cameras, the working distance was lowered and the image distortions were lessened without resorting to extensive image processing. The inspection scripts were evaluated if it could recognize good and bad products and were shown to be robust and able to reach an acceptable level of precision. It was also shown that the amount of human interaction was lessened.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.239-242
• /
• 2000

The purpose of this paper is to establish an effective inspection system by using OMM(ON-Machine Measurement) system. This allows us to reduce the manufacturing lead time by separating the inspection process from manufacturing system. As a first step, the inspection process planning is accomplished by determining the number of measuring points, their locations, measuring path and their sequence. Subsequently, we generate measuring G-codes to be transferred to the machining center through RS232C, and then the inspection process will be performed for each shape. Analysing obtained measuring data, the dimensional tolerance will be validated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.453-461
• /
• 2008

In this paper, new inspection method is proposed for the surfaces of lead frame and IC's. Optimal optical system and the accurate algorithm for the surface inspection are needed in machine vision area. The proposed optical system is composed of rectangular oblique light illumination and coaxial light illumination for the higher contrast and the results shows the better performances through experiments. The markings of IC surface are inspected using the accurate proposed method using the partitioned correlation coefficient, and the result shows reduction of under kill ratio compared to the previous method.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.31-37
• /
• 2013

This paper proposes a vision-based inspection algorithm for a punch which is used when forming the head of the small screws. To maintain good quality of punch, the precise inspection of its dimension and the depth of the punch head is important. A CCD camera and an illumination dome light are used to measure its dimensions. And a structured line laser is also used to measure the depth of the punch head. Resolution and visible area depend on setup between laser and camera which is determined using CAD-based simulation. The proposed method is successfully evaluated using experiment on #2 punch.