• 전기학회논문지
• /
• 제66권5호
• /
• pp.870-876
• /
• 2017

In this paper, we proposed the automatic vision inspection system using multi-layer perceptron to detect the defects occurred on rail surface. The proposed system consists of image acquisition part and analysis part. Rail surface image is acquired as equal interval using line scan camera and lighting. Mean filter and dynamic threshold is used to reduce noise and segment defect area. Various features to characterize the defects are extracted. And they are used to train and distinguish defects by MLP-classifier. The system is installed on HEMU-430X and applied to analyze the rail surface images acquired from Honam-line at high speed up to 300 km/h. Recognition rate is calculated through comparison with manual inspection results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.315-316
• /
• 2006

A new cleaning robot system for live-line tension insulator string was developed to prevent an insulator failure, which can have severe effects on national security as well as national industry and economy. The robot moves along the insulator string using the clamps installed on its two moving frames. Especially, unlike the existing cleaning robots using jets of water or water/air, the robot system adopts dry cleaning method using a rotating brush and a circular motion guide. This robot system has control architecture consisting of a master control unit and two slave control units. We confirmed its effectiveness through experiments.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권1호
• /
• pp.121-128
• /
• 1998

The rail, which supports the train road, distributes the wheel loads to the tie by rail stiffness. Subway sleeper on concrete ballast is construction of PC or RC sleeper. The present, PC sleeper is constructed of line 1, 2, 3, 4 Seoul Subway and RC sleeper is planing construction for the STEDEF system on concrete ballast of the line 5, Seoul, Taegu, and Kwangju Subway. The major purpose of this study is to check influence of the angle with analysising the behavior of sleeper according to the existent or non-existent of angle. And the study is carried to check static analysis by manufacture of same model.

• 비파괴검사학회지
• /
• 제12권2호
• /
• pp.14-20
• /
• 1992

Stress analysis has been performed using computer program ANSYS in the pressurizer surge line in accordance with ASME Sec. III in order to predict possibility of fatigue failure due to thermal stratification phenomena in pipes connected to reactor coolant system of nuclear power plants. Highly vulnerable area to crack generation has been chosen by the analysis of fatigue due to thermal stress in pressurizer surge line. This kind of result can be helpful to choose the location requiring intensive care during inservice inspection of nuclear power plants.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.525-533
• /
• 2009

Emphasis in the paper is placed on describing guided wave successes and challenges for applications in aircraft and composite materials inspection. Guided wave imaging methods discussed includes line of sight, tomography, guided wave C-scan, phased array, and ultrasonic vibration methods. Applications outlined encircles lap splice, bonded repair patch, fuselage corrosion, water loaded structures, delamination, and ice detection and de-icing of various structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.9-10
• /
• 2006

• 품질경영학회지
• /
• 제32권1호
• /
• pp.63-74
• /
• 2004

Recently, enterprises have focused on quality improvement for delighting their customers. Especially, all business sector have checked, analyzed their consumer complaints in detail on their products and made a plan to reduce them. But there is a limitation not to solve them. This paper presents one of tools to reduce non qualified product on their operation line directly by modernized IT technology after analyzing and making the plan.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.480-483
• /
• 1998

For memory products, it is very important to develop a new production line as soon as possible. All products are inspected to get rid of defected products at the last testing stage. Those inspection data are called FCM. In this paper, based on the FCM data, Area Usage Factor (AUF) analyzing method will be proposed. Process engineers can make up their mind to which direction they should concentrate their analyzing power.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.187-192
• /
• 1991

We consider a filling process problem on a production line. Up to present this problem have examined by 100% inspection. Thus a target value is determined which takes into account the regular selling prices, the reprocess cost, the excess quality cost and the process variability and so on. However, in this paper we propose a solution under specified sampling plan when the inspection is nondestructive.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1758-1759
• /
• 2007

본 논문에서는 표면실장기판을 위한 자동 광학 검사 시스템에서 사용되는 데이터 산출방법에 대한 알고리즘을 제안 한다. 제안된 새로운 부품검사 알고리즘은 검사영역을 분할해 템플릿에서의 매칭률이 가장 높은 부분만을 세밀하게 재검사하는 방법을 사용하여 기존의 방법들보다 시간이 단축 될 뿐만 아니라 많은 양의 메모리를 필요로 하는 템플릿의 패턴들의 메모리 용량상의 문제점을 해결할 수 있다. 실험 결과를 제시하여 제안된 검사 알고리즘을 검증한다.