• 환경위생공학
• /
• 제13권3호
• /
• pp.121-127
• /
• 1998

This study investigated exposures to oil mist obtained from an cutting oil manufacture shop and 5 machining shops and also analysis of some oils. The results were that geometric average concentrations of oil mist were $0.29 mg/m^3$, which was less than current $TLV(5mg/m^3$) in Korea. The proper case of either type of system will ensure that atmospheric concentrations of oil mist in machine shops will be within the TLV. It should be remembered, however, that this TLV was established before there was any suggestion that in the inhalable of oil mist might rarely be carcinogenic, and so it seems prudent to keep atmospheric content as low as possible. The analysis of insoluble cutting oils with GC-MSD showed that considerable suspected PAHs were contained. But soluble cutting oil(KSM-W2) didn't almost contain PAHs.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.85-91
• /
• 2015

Current world aircraft industry studies on the precision of the product are in active progress. Particularly in terms of improving the quality of processed products in terms of the surface roughness of the dimensional accuracy, fatigue strength, and corrosion resistance, which affect a lot of research on surface roughness, has been investigated. In this study of aluminum alloy, 7075 aircraft aluminum is used in a cutting CNC lathe machine for the cutting speed and feed rate according to the cutting experiments that were conducted. Additionally, the machine tool of the cooling method soluble cutting oil, insoluble cutting oil by cooling, and cooling the workpiece by cutting surface roughness will be investigated. Through the method and soluble cutting oil coolant cooled by the cutting speed increases, the value of surface roughness showed a regular result. Tool nose radius of 0.8 mm than 0.4 mm picture of when approximately 50 of the surface roughness values were less.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2001년도 International Symposium on Signal transduction in Toxicology
• /
• pp.134-134
• /
• 2001

Cutting oils are complex mixtures of hydrocarbons, comprising of certain fractions of mineral oil, which are being frequently used as lubricating and heat transferring agents in various machine and tool industries. We investigated an acute and 2 weeks repeated irritation studies of two cutting oils (Cimperial 1010 as water-soluble cutting oil, and MSN 120 as insoluble cutting oil) using guinea pigs.(omitted)

• 청정기술
• /
• 제19권2호
• /
• pp.184-188
• /
• 2013

기존 탄화수소계 세정제는 낮은 인화점으로 인하여 화재, 폭발과 같은 문제점을 가지고 있다. 인화점을 높이기 위해 불소가 포함된 난연성 세정제 7종을 개발하였다. 새롭게 합성한 세정제를 한국석유관리원에서 국가산업표준 방법으로 분석하여 물성을 측정하고 세정성 평가를 수행하였다. 물성 측정 결과, 인화점이 탄화수소계 세정제보다 높은 것을 확인하였다. 세정력 평가를 위하여 가로 60 mm, 세로 40 mm 크기의 스테인리스강 기판에 인발유, 아비에트산, 절삭유, 윤활유를 각각 도포하여 합성한 세정제(1~7)에 넣어 침적한 후 세정력을 평가하였다. 최대 5분간 침적하였을 때 인발유는 80~96%, 아비에트산은 82~97%, 윤활유는 86~93% 정도의 높은 세정력을 보였다. 그러나 절삭유에서는 60~87% 정도로 다른 오일보다 낮은 세정력을 보였다. 따라서 약간의 차이는 있지만 대체적으로 우수한 세정력을 보여 산업세정분야에 적용이 가능함을 나타내었다.